Washers
FENDER WASHER USS ZINC 1/2" X 2"
12X2FW
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/2"
- Outside Diameter: 2"
FENDER WASHER ZINC HEAVY DUTY 1/2" X 2"
12X2FWHD
- A flat washer with more surface area than a USS or SAE washer.
- Made from heavier gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/2"
- Outside Diameter: 2"
FENDER WASHER ZINC HEAVY DUTY 1/4" X 1-1/2"
14X112FWHD
- A flat washer with more surface area than a USS or SAE washer.
- Made from heavier gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1-1/2"
FENDER WASHER USS ZINC 1/4" X 1-1/2"
14X112FW
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1-1/2"
FENDER WASHER ZINC HEAVY DUTY 1/4" X 1" X 1/8" THICK
14X1FWHD
- A flat washer with more surface area than a USS or SAE washer.
- Made from heavier gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1"
FENDER WASHER USS ZINC 3/16" X 1"
36X1FW
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 3/16"
- Outside Diameter: 1"
FENDER WASHER ZINC HEAVY DUTY 3/8" X 1-1/2"
38X112FWHD
- A flat washer with more surface area than a USS or SAE washer.
- Made from heavier gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 3/8"
- Outside Diameter: 1-1/2"
FENDER WASHER USS ZINC 3/8" X 1-1/2"
38X112FW
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 3/8"
- Outside Diameter: 1-1/2"
FENDER WASHER USS ZINC 5/16" X 1-1/2"
56X112FW
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 5/16"
- Outside Diameter: 1-1/2"
FENDER WASHER ZINC HEAVY DUTY 5/16" X 1-1/2"
56X112FWHD
- A flat washer with more surface area than a USS or SAE washer.
- Made from heavier gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 5/16"
- Outside Diameter: 1-1/2"
FENDER WASHER USS ZINC 5/16" X 1-1/4"
56X114FW
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 5/16"
- Outside Diameter: 1-1/4"
FLAT WASHER USS ZINC 1" THRU HARDENED
8FW1
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 2-1/2"
- Inside Diameter: 1-1/16"
FLAT WASHER USS ZINC 3/4" THRU HARDENED
8FW34
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 2"
- Inside Diameter: 13/16"
FLAT WASHER USS ZINC 1/2" THRU HARDENED
8FW50
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 1-3/8"
- Inside Diameter: 9/16"
FLAT WASHER USS ZINC 3/8" THRU HARDENED
8FW38
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 1"
- Inside Diameter: 7/16"
FLAT WASHER USS ZINC 7/16" THRU HARDENED
8FW76
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 1-1/4"
- Inside Diameter: 1/2"
FLAT WASHER USS ZINC YELLOW 7/8" THRU HARDENED
8FW78
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 2-1/4"
- Inside Diameter: 15/16"
FLAT WASHER USS ZINC 9/16" THRU HARDENED
8FW96
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 1-1/2"
- Inside Diameter: 5/8"
LOCK WASHER SPLIT USS ZINC 1" HIGH ALLOY
8LW1
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min 1.003 Max 1.024
- Outside Diameter: 1.656
LOCK WASHER SPLIT USS ZINC 1/4" HIGH ALLOY
8LW14
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .252 Max .260
- Outside Diameter: 0.487
LOCK WASHER SPLIT USS ZINC 1/4" HIGH ALLOY 1000/BAG
8LW14-M
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .252 Max .260
- Outside Diameter: 0.487
Refine