Washers
LOCK WASHER SPLIT USS ZINC 3/4" HIGH ALLOY
8LW34
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .753 Max .766
- Outside Diameter: 1.265
LOCK WASHER SPLIT USS ZINC 7/8" HIGH ALLOY
8LW78
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .878 Max .894
- Outside Diameter: 1.459
LOCK WASHER SPLIT USS ZINC 7/16" HIGH ALLOY
8LW76
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .440 Max .450
- Outside Diameter: 0.776
LOCK WASHER SPLIT USS ZINC 9/16" HIGH ALLOY
8LW96
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .564 Max .574
- Outside Diameter: 0.965
LOCK WASHER SPLIT USS ZINC 5/16" HIGH ALLOY 1000/BAG
8LW56-M
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .314 Max .322
- Outside Diameter: 0.583
FLAT WASHER SAE ZINC 1" THRU HARDENED
8SFW1
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 2"
- Inside Diameter: 1-1/16"
FLAT WASHER SAE ZINC 1/4" THRU HARDENED 1000/BAG
8SFW14-M
- Used to improve stress distribution, and to span large holes
- SAE PATTERN
- Made from heat treated thru-hardened steel
- Outside Diameter: 5/8″
- Inside Diameter: 9/32″
- Case Quantity: 1,000
- Yellow zinc plated
FLAT WASHER SAE ZINC 7/8" THRU HARDENED
8SFW78
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 1-3/4"
- Inside Diameter: 15/16"
FLAT WASHER SAE ZINC 9/16" THRU HARDENED
8SFW96
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 1-3/16"
- Inside Diameter: 19/32"
FINISH WASHER COUNTER-SUNK SS 1/4"
CSFW14
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.
FINISH WASHER COUNTER-SUNK SS #10
CSFW10
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.
FINISH WASHER COUNTER-SUNK SS #6
CSFW6
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.
FINISH WASHER COUNTER-SUNK SS #8
CSFW8
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.
FINISH WASHER COUNTER-SUNK SS #12
CSFW12
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.
LOCK WASHER EXTERNAL ZINC #12 EXTERNAL TOOTHED
ELW12
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .221 Max .231
- Outside Diameter: Min .460 Max .475
- Thickness: Min .020 Max .027
LOCK WASHER EXTERNAL ZINC #10 EXTERNAL TOOTHED
ELW10
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .195 Max .204
- Outside Diameter: Min .395 Max .410
- Thickness: Min .018 Max .024
LOCK WASHER EXTERNAL ZINC 1/4" EXTERNAL TOOTHED
ELW14
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .256 Max .267
- Outside Diameter: Min .494 Max .510
- Thickness: Min .023 Max .028
LOCK WASHER EXTERNAL ZINC 3/4" EXTERNAL TOOTHED
ELW34
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .768 Max .795
- Outside Diameter: Min 1.220 Max 1.260
- Thickness: Min .047 Max .055
LOCK WASHER EXTERNAL ZINC 3/8" EXTERNAL TOOTHED
ELW38
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .384 Max .398
- Outside Diameter: Min .670 Max .694
- Thickness: Min .032 Max .040
LOCK WASHER EXTERNAL ZINC 5/8" EXTERNAL TOOTHED
ELW58
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .641 Max .663
- Outside Diameter: Min 1.045 Max 1.070
- Thickness: Min .042 Max .050
LOCK WASHER EXTERNAL ZINC 1/2" EXTERNAL TOOTHED
ELW50
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .513 Max .530
- Outside Diameter: Min .880 Max .900
- Thickness: Min .037 Max .045
LOCK WASHER EXTERNAL ZINC 5/16" EXTERNAL TOOTHED
ELW56
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .320 Max .332
- Outside Diameter: Min .588 Max .610
- Thickness: Min .028 Max .034
LOCK WASHER EXTERNAL ZINC 7/16" EXTERNAL TOOTHED
ELW76
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .448 Max .464
- Outside Diameter: Min .740 Max .760
- Thickness: Min .032 Max .040
Refine