Grinding Wheels
GRINDING WHEEL TYPE 27 W/HUB 4-1/2" D, 1/4" W, 5/8"-11
GW412X14X58H
- 4-1/2" Diameter
- 1/4" Width
- 5/8"-11 Bore
- 13,300 Max RPM
- Type 27 depressed center grinding wheel.
- Aluminum oxide grain.
- Soft bond for fast stock removal.
- For use on ferrous metals such as iron, steel, welds, etc and low grade stainless steel.
GRINDING WHEEL TYPE 27 4-1/2" D, 1/4" W, 7/8"
GW412X14X78
- Type 27 depressed center grinding wheel.
- Aluminum oxide grain.
- 4-1/2" diameter.
- 1/4” thick.
- 7/8" arbor hole.
- Soft bond for fast stock removal.
- For use on ferrous metals such as iron, steel, welds, etc and low grade stainless steel.
GRINDING WHEEL TYPE 27 4-1/2" D, 1/8" W, 7/8"
GW412X18X78
- Type 27 cutting/grinding wheel.
- Aluminum oxide grain.
- 4-1/2" diameter.
- 1/8” thick.
- 7/8" arbor hole.
- Designed and manufactured to perform both cutting and light grinding.
- For use on ferrous metals such as steel, cast iron, etc.
GRINDING WHEEL TYPE 27 4" D, 1/4" W, 5/8"
GW4X14X58
- Type 27 depressed center grinding wheel.
- Aluminum oxide grain.
- 4" diameter.
- 1/4” thick.
- 5/8" arbor hole.
- Soft bond for fast stock removal.
- For use on ferrous metals such as iron, steel, welds, etc and low grade stainless steel.
CERAMIC GRIDING WHEEL, 4-1/2" X 1/4" X 7/8", 24 GRIT
XCGW54270
- 4-1/2 x 1/4 x 7/8
- CER24-TBF Grain
- 24 Grit
- 13,300 Max RPM
- Extremely fast stock removal - high performance CERAMIC grain
- Advanced bonding system - specially engineered to provide longer life and fast grind
- Dual layer structure: Grinding layer with aggressive coarse ceramic grains. Supporting layer for better surface finish and smoother grinding
- High density, uniform grain structure is self-sharpening and provides a cooler cut
- Labor cost savings - grinds fast and much more efficiently compared to conventional grinding wheels
- Can be used on steel, stainless steel, and high tensile metals
- Best choice for heavy material removal applications
- Maximum performance on high power machines
CERAMIC GRINDING WHEEL, 4-1/2" X 1/4" X 5/8"-11, 24 GRIT, 10/PACK
XCGW54271
- 4-1/2 x 1/4 x 5/8-11
- CER24-TBF Grain
- 24 Grit
- 13,300 Max RPM
- Extremely fast stock removal - high performance CERAMIC grain
- Advanced bonding system - specially engineered to provide longer life and fast grind
- Dual layer structure: Grinding layer with aggressive coarse ceramic grains. Supporting layer for better surface finish and smoother grinding
- High density, uniform grain structure is self-sharpening and provides a cooler cut
- Labor cost savings - grinds fast and much more efficiently compared to conventional grinding wheels
- Can be used on steel, stainless steel, and high tensile metals
- Best choice for heavy material removal applications
- Maximum performance on high power machines
GRINDING WHEEL TYPE 27 W/HUB 4-1/2" D, 1/4" W, 5/8"-11
XGW412X14X58H
- 4-1/2" diameter
- 5/8-11 arbor
- Type 27
- Aluminum oxide
- Excellent ration of stock removal/wheel loss
- Soft N-grade bond for fast stock removal
GRINDING WHEEL TYPE 27 4-1/2" D, 1/4" W, 7/8" BORE
XGW412X14X78
- 4-1/2" diameter
- 7/8" arbor
- Type 27 A24N Fast Cut
- 13,300 Max RPM
- Aluminum Oxide
- Soft N-grade bond for fast stock removal
- Excellent ratio of stock removal/wheel loss
GRINDING WHEEL FOR ALUMINUM, 4-1/2" X 1/4" X 5/8"-11 HUB, TYPE 27
XGWAL412X14X58H
- 4-1/2" diameter
- 5/8-11 arbor
- Type 27 1/4" thick for aluminum
- Aluminum Depressed center wheel
- Recommended for aluminum, copper, zinc, and other non-ferrous materials
GRINDING WHEEL TYPE 27 4 1/2 X 1/4 5/8-11 ARBOR
XUA20163
- Aluminum oxide grain. A24R
- For general purpose grinding
- 4-1/2" diameter
- 1/4" thick
- 5/8-11 arbor
GRINDING WHEEL TYPE 28 4 1/2 X 1/4 5/8-11 HUB A24T
XUA20165
- Aluminum oxide grain. A24T
- Hard bond designed for edge and bevel grinding and other applications where a harder wheel is preferred.
- 4-1/2" diameter
- 1/4" thick
- 5/8-11 arbor
GRINDING WHEEL TYPE 27 5 X 1/4 5/8-11 ARBOR
XUA22612
- Touch zirconium grain
- High performance grinding for the toughest applications.
- 5" diameter
- 1/4" thick
- 5/8-11 arbor
GRINDING WHEEL TYPE 27 9 X 1/4 5/8-11 A24T
XUA20195
- Aluminum oxide grain. A24T
- Hard bond designed for edge and bevel grinding and other applications where a harder wheel is preferred.
- 9" diameter
- 1/4" thick
- 5/8-11 arbor
GRINDING WHEEL 8 X 1 X 1 36 GRIT
XUA28023
- 8" Diameter
- 1" Width
- 1" Bore
- 3,600 Max RPM
- 36 grit
- Bench grinder wheels.
- Aluminum oxide grain.
- General purpose.
- For sharpening tools and light stock removal.
- For use on ferrous metals such as carbon steel, steel, iron, forgings, etc.