Taps
TAP BOTTOMING M10-1.50
XM10X1.5BTAP
- Bottom tap
- High speed steel
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Threads close to the bottom of blind holes.
- Size: M10-1.50
$46.8113
TAP-HIGH SPEED, PIPE-TAPER 1/8" NPT
X18MPTTAP
- Taper pipe tap
- Made from high quality high speed steel.
- For the tapping of pipe and pipe fittings.
- Designed to produce threads where mated parts are not required to withstand high fluid or gas pressures.
- Use where the use of a sealing compound or tape is acceptable to produce a leakproof thread.
- Chamfer length: 1-2 pitches.
- Size: 1/8-27 NPT.
- Number of flutes: 4.
- Length of thread: 3/4".
- Overall length: 2-1/8".
$68.7389
HAND TAP - HIGH SPEED/BOTTOM 3/4"-10
X3410BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 3/4-10.
- Number of flutes: 4.
- Length of thread: 2".
- Overall length: 4-1/4".
$75.7807
HAND TAP - HIGH SPEED/PLUG 3/4"-10
X3410PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 3/4-10.
- Number of flutes: 4.
- Length of thread: 2".
- Overall length: 4-1/4".
$75.7807
HAND TAP - HIGH SPEED/BOTTOM 5/16"-24
X5624BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 5/16-24.
- Number of flutes: 4.
- Length of thread: 1-1/8".
- Overall length: 2-23/32".
$17.2992
HAND TAP - HIGH SPEED/PLUG 5/16"-24
X5624PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 5/16-24.
- Number of flutes: 4.
- Length of thread: 1-1/8".
- Overall length: 2-23/32".
$17.2992
HAND TAP - HIGH SPEED/TAPER 5/16"-24
X5624TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 5/16-24.
- Number of flutes: 4.
- Length of thread: 1-1/8".
- Overall length: 2-23/32".
$17.2992
HAND TAP - HIGH SPEED/PLUG 5/8"-11
X5811PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 5/8-11.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$63.349
HAND TAP - HIGH SPEED/TAPER 5/8"-11
X5811TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 5/8-11.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$63.349
HAND TAP - HIGH SPEED/BOTTOM 5/8"-18
X5818BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 5/8-18.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$63.349
HAND TAP - HIGH SPEED/PLUG 5/8"-18
X5818PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 5/8-18.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$63.349
HAND TAP - HIGH SPEED/BOTTOM 5/8"-11
X5811BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 5/8-11.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$63.349
HAND TAP - HIGH SPEED/BOTTOM #6-32
X632BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 6-32.
- Number of flutes: 3.
- Length of thread: 11/16".
- Overall length: 2".
$15.2954
HAND TAP - HIGH SPEED/TAPER #6-32
X632TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 6-32.
- Number of flutes: 3.
- Length of thread: 11/16".
- Overall length: 2".
$16.065
HAND TAP - HIGH SPEED/BOTTOM 7/16"-20
X7620BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 7/16-20.
- Number of flutes: 4.
- Length of thread: 1-7/16".
- Overall length: 3-5/32"..
$32.4487
HAND TAP - HIGH SPEED/TAPER 7/16"-14
X7614TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 7/16-14.
- Number of flutes: 4.
- Length of thread: 1-7/16".
- Overall length: 3-5/32".
$32.4487
HAND TAP - HIGH SPEED/BOTTOM 7/16"-14
X7614BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 7/16-14.
- Number of flutes: 4.
- Length of thread: 1-7/16".
- Overall length: 3-5/32".
$32.4487
HAND TAP - HIGH SPEED/TAPER 7/8"-9
X789TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 7/8-9.
- Number of flutes: 4.
- Length of thread: 2-7/32".
- Overall length: 4-11/16".
$97.2537
HAND TAP - HIGH SPEED/BOTTOM #8-32
X832BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 8-32.
- Number of flutes: 4.
- Length of thread: 3/4".
- Overall length: 2-1/8".
$13.7817
HAND TAP - HIGH SPEED/PLUG #8-32
X832PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 8-32.
- Number of flutes: 4.
- Length of thread: 3/4".
- Overall length: 2-1/8".
$13.7817
HAND TAP - HIGH SPEED/TAPER #8-32
X832TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 8-32.
- Number of flutes: 4.
- Length of thread: 3/4".
- Overall length: 2-1/8".
$14.4925
HAND TAP - HIGH SPEED/BOTTOM 7/16"-12
X9612BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 9/16-12.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
$53.1509
HAND TAP - HIGH SPEED/BOTTOM #10-24
X1024BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 10-24.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$13.7817
HAND TAP - HIGH SPEED/PLUG #10-24
X1024PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 10-24.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$13.7817
HAND TAP - HIGH SPEED/TAPER #10-24
X1024TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 10-24.
- Number of flutes: 4.
- Length of thread: 7/8".
- Overall length: 2-3/8".
$14.4925