Nuts

View as Grid List
Sort by
Display items per page
3816WN

WING NUT UNC ZINC 3/8"-16

3816WN
  • A nut with wings which allow the part to be manually turned.
  • Used when a part is frequently assembled and disassembled at a place where torque greater than that achieved with finger pressure is not needed.
  • Made from cold forged steel.
  • Zinc plated.
  • Size: 3/8"-16.
    $0.00
    + -
    KN1032

    KEP NUT UNF ZINC #10-32

    KN1032
    • Keps nuts, also known as K lock nuts.
    • A hex nut pre-assembled with a free spinning external tooth lock washer.
    • The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
    • The most popular type of locknut because of its versatility, cost and ease of installation.
    • Steel, zinc plated.
    • Size: #10-32.
      $0.00
      + -
      KN1024

      KEP NUT UNC ZINC #10-24

      KN1024
      • Keps nuts, also known as K lock nuts.
      • A hex nut pre-assembled with a free spinning external tooth lock washer.
      • The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
      • The most popular type of locknut because of its versatility, cost and ease of installation.
      • Steel, zinc plated.
      • Size: #10-24.
        $0.00
        + -
        KN1224

        KEP NUT UNC ZINC #12-24

        KN1224
        • Keps nuts, also known as K lock nuts.
        • A hex nut pre-assembled with a free spinning external tooth lock washer.
        • The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
        • The most popular type of locknut because of its versatility, cost and ease of installation.
        • Steel, zinc plated.
        • Size: #12-24.
          $0.00
          + -
          KN1420

          KEP NUT UNC ZINC 1/4"-20

          KN1420
          • Keps nuts, also known as K lock nuts.
          • A hex nut pre-assembled with a free spinning external tooth lock washer.
          • The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
          • The most popular type of locknut because of its versatility, cost and ease of installation.
          • Steel, zinc plated.
          • Size: 1/4"-20.
            $0.00
            + -
            KN5618

            KEP NUT UNC ZINC 5/16"-18

            KN5618
            • Keps nuts, also known as K lock nuts.
            • A hex nut pre-assembled with a free spinning external tooth lock washer.
            • The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
            • The most popular type of locknut because of its versatility, cost and ease of installation.
            • Steel, zinc plated.
            • Size: 5/16"-18.
              $0.00
              + -
              LN1024SS

              LOCK NUT NYLON UNC STAINLESS #10-24

              LN1024SS
              • Hex nut with a nylon-filled collar at its back end.
              • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
              • Restricts movement of the screw when it is subjected to vibration.
              • Designed to be used with stainless steel machine screws and bolts.
              • Reusable.
              • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
              • Made form 18-8 or equivalent stainless steel.
              • Size: #10-24.
                $0.00
                + -
                LN1213

                LOCK NUT NYLON UNC ZINC 1/2"-13 GR 2

                LN1213
                • Hex nut with a nylon-filled collar at its back end.
                • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                • Restricts movement of the screw when it is subjected to vibration.
                • Designed to be used with like-material machine screws and bolts.
                • Reusable.
                • Less expensive than Grade C Stover lock nuts.
                • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                • Proof load: 90,000 psi. minimum.
                • Size: 1/2"-13.
                • Zinc plated.
                  $0.00
                  + -
                  LN1213SS

                  LOCK NUT NYLON UNC STAINLESS 1/2"-13

                  LN1213SS
                  • Hex nut with a nylon-filled collar at its back end.
                  • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                  • Restricts movement of the screw when it is subjected to vibration.
                  • Designed to be used with stainless steel machine screws and bolts.
                  • Reusable.
                  • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
                  • Made form 18-8 or equivalent stainless steel.
                  • Size: 1/2"-13.
                    $0.00
                    + -
                    LN1024

                    LOCK NUT NYLON UNC ZINC #10-24 GR 2

                    LN1024
                    • Hex nut with a nylon-filled collar at its back end.
                    • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                    • Restricts movement of the screw when it is subjected to vibration.
                    • Designed to be used with like-material machine screws and bolts.
                    • Reusable.
                    • Less expensive than Grade C Stover lock nuts.
                    • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                    • Proof load: 90,000 psi. minimum.
                    • Size: #10-24.
                    • Zinc plated.
                      $0.00
                      + -
                      LN1032SS

                      LOCK NUT NYLON UNF STAINLESS #10-32

                      LN1032SS
                      • Hex nut with a nylon-filled collar at its back end.
                      • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                      • Restricts movement of the screw when it is subjected to vibration.
                      • Designed to be used with stainless steel machine screws and bolts.
                      • Reusable.
                      • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
                      • Made form 18-8 or equivalent stainless steel.
                      • Size: #10-32.
                        $0.00
                        + -
                        LN1224

                        LOCK NUT NYLON UNC ZINC #12-24 GR 2

                        LN1224
                        • Hex nut with a nylon-filled collar at its back end.
                        • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                        • Restricts movement of the screw when it is subjected to vibration.
                        • Designed to be used with like-material machine screws and bolts.
                        • Reusable.
                        • Less expensive than Grade C Stover lock nuts.
                        • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                        • Proof load: 90,000 psi. minimum.
                        • Size: #12-24.
                        • Zinc plated.
                          $0.00
                          + -
                          LN1220

                          LOCK NUT NYLON UNF ZINC 1/2"-20 GR 2

                          LN1220
                          • Hex nut with a nylon-filled collar at its back end.
                          • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                          • Restricts movement of the screw when it is subjected to vibration.
                          • Designed to be used with like-material machine screws and bolts.
                          • Reusable.
                          • Less expensive than Grade C Stover lock nuts.
                          • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                          • Proof load: 90,000 psi. minimum.
                          • Size: 1/2"-20.
                          • Zinc plated.
                            $0.00
                            + -
                            LN1032

                            LOCK NUT NYLON UNF ZINC #10-32 GR 2

                            LN1032
                            • Hex nut with a nylon-filled collar at its back end.
                            • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                            • Restricts movement of the screw when it is subjected to vibration.
                            • Designed to be used with like-material machine screws and bolts.
                            • Reusable.
                            • Less expensive than Grade C Stover lock nuts.
                            • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                            • Proof load: 90,000 psi. minimum.
                            • Size: #10-24.
                            • Zinc plated.
                              $0.00
                              + -
                              LN1224SS

                              LOCK NUT NYLON UNC STAINLESS #12-24

                              LN1224SS
                              • Hex nut with a nylon-filled collar at its back end.
                              • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                              • Restricts movement of the screw when it is subjected to vibration.
                              • Designed to be used with stainless steel machine screws and bolts.
                              • Reusable.
                              • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
                              • Made form 18-8 or equivalent stainless steel.
                              • Size: #12-24.
                                $0.00
                                + -
                                LN1420SS

                                LOCK NUT NYLON UNC STAINLESS 1/4"-20

                                LN1420SS
                                • Hex nut with a nylon-filled collar at its back end.
                                • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                • Restricts movement of the screw when it is subjected to vibration.
                                • Designed to be used with stainless steel machine screws and bolts.
                                • Reusable.
                                • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
                                • Made form 18-8 or equivalent stainless steel.
                                • Size: 1/4"-20.
                                  $0.00
                                  + -
                                  LN1428

                                  LOCK NUT NYLON UNF ZINC 1/4"-28 GR 2

                                  LN1428
                                  • Hex nut with a nylon-filled collar at its back end.
                                  • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                  • Restricts movement of the screw when it is subjected to vibration.
                                  • Designed to be used with like-material machine screws and bolts.
                                  • Reusable.
                                  • Less expensive than Grade C Stover lock nuts.
                                  • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                  • Proof load: 90,000 psi. minimum.
                                  • Size: 1/4"-28.
                                  • Zinc plated.
                                    $0.00
                                    + -
                                    LN3416

                                    LOCK NUT NYLON UNF ZINC 3/4"-16 GR 2

                                    LN3416
                                    • Hex nut with a nylon-filled collar at its back end.
                                    • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                    • Restricts movement of the screw when it is subjected to vibration.
                                    • Designed to be used with like-material machine screws and bolts.
                                    • Reusable.
                                    • Less expensive than Grade C Stover lock nuts.
                                    • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                    • Proof load: 90,000 psi. minimum.
                                    • Size: 3/4"-16.
                                    • Zinc plated.
                                      $0.00
                                      + -
                                      LN3410

                                      LOCK NUT NYLON UNC ZINC 3/4"-10 GR 2

                                      LN3410
                                      • Hex nut with a nylon-filled collar at its back end.
                                      • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                      • Restricts movement of the screw when it is subjected to vibration.
                                      • Designed to be used with like-material machine screws and bolts.
                                      • Reusable.
                                      • Less expensive than Grade C Stover lock nuts.
                                      • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                      • Proof load: 90,000 psi. minimum.
                                      • Size: 3/4"-10.
                                      • Zinc plated.
                                        $0.00
                                        + -
                                        LN3816

                                        LOCK NUT NYLON UNC ZINC 3/8"-16 GR 2

                                        LN3816
                                        • Hex nut with a nylon-filled collar at its back end.
                                        • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                        • Restricts movement of the screw when it is subjected to vibration.
                                        • Designed to be used with like-material machine screws and bolts.
                                        • Reusable.
                                        • Less expensive than Grade C Stover lock nuts.
                                        • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                        • Proof load: 90,000 psi. minimum.
                                        • Size: 3/8"-16.
                                        • Zinc plated.
                                          $0.00
                                          + -
                                          LN3816SS

                                          LOCK NUT NYLON UNC STAINLESS 3/8"-16

                                          LN3816SS
                                          • Hex nut with a nylon-filled collar at its back end.
                                          • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                          • Restricts movement of the screw when it is subjected to vibration.
                                          • Designed to be used with stainless steel machine screws and bolts.
                                          • Reusable.
                                          • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
                                          • Made form 18-8 or equivalent stainless steel.
                                          • Size: 3/8"-16.
                                            $0.00
                                            + -
                                            LN3824

                                            LOCK NUT NYLON UNC ZINC 3/8"-24 GR 2

                                            LN3824
                                            • Hex nut with a nylon-filled collar at its back end.
                                            • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                            • Restricts movement of the screw when it is subjected to vibration.
                                            • Designed to be used with like-material machine screws and bolts.
                                            • Reusable.
                                            • Less expensive than Grade C Stover lock nuts.
                                            • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                            • Proof load: 90,000 psi. minimum.
                                            • Size: 3/8"-24.
                                            • Zinc plated.
                                              $0.00
                                              + -
                                              LN440

                                              LOCK NUT NYLON UNC ZINC #4-40 GR 2

                                              LN440
                                              • Hex nut with a nylon-filled collar at its back end.
                                              • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                              • Restricts movement of the screw when it is subjected to vibration.
                                              • Designed to be used with like-material machine screws and bolts.
                                              • Reusable.
                                              • Less expensive than Grade C Stover lock nuts.
                                              • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                              • Proof load: 90,000 psi. minimum.
                                              • Size: #4-40.
                                              • Zinc plated.
                                                $0.00
                                                + -
                                                LN5618SS

                                                LOCK NUT NYLON UNC STAINLESS 5/16"-18

                                                LN5618SS
                                                • Hex nut with a nylon-filled collar at its back end.
                                                • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                                • Restricts movement of the screw when it is subjected to vibration.
                                                • Designed to be used with stainless steel machine screws and bolts.
                                                • Reusable.
                                                • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
                                                • Made form 18-8 or equivalent stainless steel.
                                                • Size: 5/16"-18.
                                                  $0.00
                                                  + -
                                                  LN5624

                                                  LOCK NUT NYLON UNC ZINC 5/16"-24 GR 2

                                                  LN5624
                                                  • Hex nut with a nylon-filled collar at its back end.
                                                  • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
                                                  • Restricts movement of the screw when it is subjected to vibration.
                                                  • Designed to be used with like-material machine screws and bolts.
                                                  • Reusable.
                                                  • Less expensive than Grade C Stover lock nuts.
                                                  • The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
                                                  • Proof load: 90,000 psi. minimum.
                                                  • Size: 5/16"-24.
                                                  • Zinc plated.
                                                    $0.00
                                                    + -
                                                    Refine
                                                    ×
                                                    Category
                                                    Thread Type
                                                    Availability