Washers
FENDER WASHER STAINLESS 5/16" X 1"
X56X1FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
$0.00
FENDER WASHER STAINLESS #6 X 6/8"
X6X58FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
- Inside Diameter: #6
- Outside Diameter: 5/8""
$0.00
FENDER WASHER STAINLESS #8 X 3/4"
X8X34FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
$0.00
AUVECO COPPER WASHER 1/2" I.D. 7/8" O.D. 1/16" THICK 7/16" BOLT SIZE 25/BX
XA15918
- COPPER WASHER 1/2 I.D. 7/8 O.D. 1/16 THICK
- Bolt Size : 7/16"
- Nominal Size : 1/2" x 7/8"
- Inner Diameter : .5"
- Outer Diameter : .875"
$0.00
VIBRATION PROOF LOCK WASHER 1/2" (12MM) 20(10PR)/BX
XA19287
- VIBRATION PROOF LOCK WASHER
- Bolt Size : 1/2" or 12MM
- Outer Diameter : 49/64"
- Hardness : Through Hardened: 465HVI
- Material : Carbon Steel
$0.00
FLAT WASHER BONDED SEALING 1/4" STAINLESS
XBSW14SS
- Neoprene Bonded Washer
- 18-8 Stainless
- Outside Diameter: 3/4"
$0.00
LOCKWASHER SPLIT METRIC PLAIN , M10
XLW10MPL
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, plain finish
- Resists loosening caused by vibration and corrosion.
$0.00
LOCKWASHER SPLIT METRIC ZINC , M20
XLW20M
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with metric bolts and screws.
- Rockwell Hardness: C44-51
- Inside Diameter: M20
$0.00
