Abrasives
SHOP ROLL UTILITY CLOTH - 3M 120 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X120
- 3M utility cloth roll.
- 1-1/2" wide material.
- 120 grit.
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
$100.5015
SHOP ROLL UTILITY CLOTH - 3M 180 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X180
- 3M utility cloth roll.
- 1-1/2" wide material.
- 180 grit.
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
$100.5015
SHOP ROLL UTILITY CLOTH - 3M 240 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X240
- 3M utility cloth roll.
- 1-1/2" wide material.
- 240 grit.
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
$106.5317
SHOP ROLL UTILITY CLOTH - 3M 320 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X320
- 3M utility cloth roll.
- 1-1/2" wide material.
- 320 grit.
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
$96.921
SHOP ROLL UTILITY CLOTH - 3M 400 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X400
- 3M utility cloth roll.
- 1-1/2" wide material.
- 400 grit.
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
$96.921
SHOP ROLL UTILITY CLOTH - 3M 80 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X80
- 3M utility cloth roll.
- 1-1/2" wide material.
- 80 grut,
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
$100.518
ABRASIVE HAND PAD GENERAL PURPOSE
AHPGP
- Non-woven nylon/polyester fiber.
- Very fine aluminum oxide mineral.
- Load resistant.
- 9" long x 6" wide.
- 1/4" thick.
- Color: maroon.
- Most universally used in a variety of applications.
- Excellent starting point to clean, finish, grain, denib and defuzz.
- May be used by hand, with a hand pad block, or on an in-line sander.
$117.456
$5.8728
$5.8728
CUT OFF WHEEL HIGH SPD TYPE 1 3" DIAM, .035" W, 3/8"
COW3X.035X38
- 3" Diameter
- .035" Width
- 3/8" Bore
- 25,000 Max RPM
- Type 1 fast cutting cut off wheel. Square, burr-free cutting.
- For use with die grinder.
- Aluminum oxide grain.
- Hard bond for aggressive cutting on rough applications.
- Great for ferrous metals (iron, steel, welds, etc.). Also good for stainless steel
$8.14
CUT OFF WHEEL HIGH SPD TYPE 1 3" DIAM, 1/16" W, 3/8"
COW3X16X38
- 3" Diameter
- 1/16" Width
- 3/8" Bore
- 25,000 Max RPM
- Type 1 fast cutting cut off wheel. Square, burr-free cutting.
- For use with die grinder.
- Aluminum oxide grain.
- Hard bond for aggressive cutting on rough applications.
- Great for ferrous metals (iron, steel, welds, etc.). Also good for stainless steel
$8.14
CUT OFF WHEEL ARBOR ADAPTOR 1/4" SHANK X 3/8" ARBOR
COWA14X38
- Mandrel for cut off wheels.
- 1/4” and 3/8” combination mandrel.1/4" shank.
- 1/4" shank.
$30.4125
CUT OFF WHEEL HIGH SPD TYPE 1 4" DIAM, 1/16" W, 3/8"
COW4X16X38
- 4" Diameter
- 1/16" Width
- 3/8" Bore
- 19,000 Max RPM
- Type 1 fast cutting cut off wheel. Square, burr-free cutting.
- For use with die grinder.
- Aluminum oxide grain.
- Hard bond for aggressive cutting on rough applications.
- Great for ferrous metals (iron, steel, welds, etc.). Also good for stainless steel
$9.75
CHOP SAW WHEEL TYPE 1, 14" DIAM, 3/32" WIDTH, 1"
CSW14X332X1
- 14" Diameter
- 3/32" Width
- 1" Bore
- 4,400 Max RPM
- Iron worker chop saw wheel. Fast cutting.
- Specially formulated for use on low horsepower chop saw machines for fast cutting with minimal pressure.
- Aluminum oxide grain.
- Excellent for use on angle iron, channel iron, heavy rebar, and other ferrous metals.
- For use in structural metal applications.
$31.6875
ABRASIVE HAND PAD ULTRA FINE, LIGHT GRAY
X3M07448
- Non-woven nylon/polyester fiber.
- Very fine aluminum oxide mineral.
- Load resistant.
- 9" long x 6" wide.
- 1/4" thick.
$120.66
$6.033
$6.033
3M CUBITRON ROLOC DISC 3" 36 GRIT SOLD BY CARTON OF 15
X3M33190
- 3" diameter
- 36 Grit Purple
- Roloc Quick Change Pad
- 30,000 Max RPM
- Ceramic Precision-Shaped Grain
$87.9663
ROLOC BRISTLE - DISC 2" 50 GRIT, 5/8" TAPERED
RBD2-50T
- Fast running bristle disc with Roloc attachment.
- 2" diameter.
- 50 grit.
- Color: green.
- 5/8” thick.
- Tapered center.
- Efficiently clean or strip many substances from metal surfaces without damaging the work piece.
- Quickly and easily achieve a quality, consistent finish with light pressure.
$28.9125
ROLOC BRISTLE - DISC 3" 50 GRIT, 5/8" TAPERED
RBD3-50T
- Fast running bristle disc with Roloc attachment.
- 3" diameter.
- 50 grit.
- Color: green.
- 5/8” thick.
- Tapered center.
- Efficiently clean or strip many substances from metal surfaces without damaging the work piece.
- Quickly and easily achieve a quality, consistent finish with light pressure.
$41.706
ROLOC BRISTLE - DISC 3" 80 GRIT, 5/8" TAPERED
RBD3-80T
- Fast running bristle disc with Roloc attachment.
- 3" diameter.
- 80 grit.
- Color: yellow.
- 5/8” thick.
- Tapered center.
- Efficiently clean or strip many substances from metal surfaces without damaging the work piece.
- Quickly and easily achieve a quality, consistent finish with light pressure.
$38.724
ROLOC COATING REMOVAL DISC 3" EXTRA COARSE - 3M 18350
RCRD3
- Coating removal disc
- Heavy duty, semi-open web used to clean rust and paint.
- Silicon carbide mineral
- Roloc attachment style.
- 3" diameter
- Extra coarse grade
- Color: black
- Max RPM: 15,000
$262.575
$26.2575
$26.2575
ROLOC COATING REMOVAL DISC 2" EXTRA COARSE - 3M 18364
RCRD2
- Coating removal disc
- Heavy duty, semi-open web used to clean rust and paint.
- Silicon carbide mineral
- Roloc attachment style.
- 2" diameter
- Extra coarse grade
- Color: black
- Max RPM: 18,000
$132.009
$13.2009
$13.2009
ROLOC DISC-SURF COND DISC 2" COR, 05528,07488,07588,07480
RSCD2C
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 2" diameter.
- Coarse grade.
- Color: brown.
- Max RPM: 25,000
- Used for cleaning, finishing, blending and deburring.
$293.975
$5.8795
$5.8795
ROLOC DISC-SURF COND DISC 3" COR, 05532,07485,07585
RSCD3C
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 3" diameter.
- Coarse grade.
- Color: brown.
- Max RPM: 20,000
- Used for cleaning, finishing, blending and deburring.
$151.5525
$6.0621
$6.0621
ROLOC DISC-SURF COND DISC 3" MED, 05531,07486,07586
RSCD3M
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 3" diameter.
- Medium grade.
- Color: maroon.
- Max RPM: 20,000
- Used for cleaning, finishing, blending and deburring.
$150.3425
$6.0137
$6.0137
ROLOC DISC-SURF COND DISC 2" MED, 05527,07481,07489,07589
RSCD2M
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 2" diameter.
- Medium grade.
- Color: maroon.
- Max RPM: 25,000
- Used for cleaning, finishing, blending and deburring.
$189.72
$3.7944
$3.7944