Heat Shrink Tubing

View as Grid List
Sort by
Display items per page
HSS1

HEAT SHRINK HEAVY-WALL 6" STK 3/4" ID, RED, 3:1 S/R

HSS1
  • Heavy wall polyolefin tubing with dual purpose thermoplastic liner.
  • High expansion ratios (3:1) enable a minimum number of sizes to cover a broad range of cable and connector sizes.
  • Maximum protection for insulating and sealing electrical connections and terminations.
  • Tough outer jacket protects against abrasion, vibration and flexing.
  • May be used over lead, steel, aluminum, copper, standard plastic and all elastomeric insulations of power cables, battery cable and over all repair splices.
  • 3/4 inch i.d.
  • 6" stick
  • Red
    $0.00
    + -
    HSS2

    HEAT SHRINK HEAVY-WALL 6" STK 3/4" ID, BLACK, 3:1 S/R

    HSS2
    • Heavy wall polyolefin tubing with dual purpose thermoplastic liner.
    • High expansion ratios (3:1) enable a minimum number of sizes to cover a broad range of cable and connector sizes.
    • Maximum protection for insulating and sealing electrical connections and terminations.
    • Tough outer jacket protects against abrasion, vibration and flexing.
    • May be used over lead, steel, aluminum, copper, standard plastic and all elastomeric insulations of power cables, battery cable and over all repair splices.
    • 3/4 inch i.d.
    • 6" stick
    • Black
      $0.00
      + -
      HSS401

      HEAT SHRINK HEAVY-WALL 6" STK 1" ID, RED, 3:1 S/R

      HSS401
      • Heavy wall polyolefin tubing with dual purpose thermoplastic liner.
      • High expansion ratios (3:1) enable a minimum number of sizes to cover a broad range of cable and connector sizes.
      • Maximum protection for insulating and sealing electrical connections and terminations.
      • Tough outer jacket protects against abrasion, vibration and flexing.
      • May be used over lead, steel, aluminum, copper, standard plastic and all elastomeric insulations of power cables, battery cable and over all repair splices.
      • 1 inch i.d.
      • 6" stick
      • Red
        $0.00
        + -
        HSS402

        HEAT SHRINK HEAVY-WALL 6" STK 1" ID, BLACK, 3:1 S/R

        HSS402
        • Heavy wall polyolefin tubing with dual purpose thermoplastic liner.
        • High expansion ratios (3:1) enable a minimum number of sizes to cover a broad range of cable and connector sizes.
        • Maximum protection for insulating and sealing electrical connections and terminations.
        • Tough outer jacket protects against abrasion, vibration and flexing.
        • May be used over lead, steel, aluminum, copper, standard plastic and all elastomeric insulations of power cables, battery cable and over all repair splices.
        • 1 inch i.d.
        • 6" stick
        • Black
          $0.00
          + -
          HSS61

          HEAT SHRINK HEAVY-WALL 6" STK .35" ID, RED, 3:1 S/R

          HSS61
          • Heavy wall polyolefin tubing with dual purpose thermoplastic liner.
          • High expansion ratios (3:1) enable a minimum number of sizes to cover a broad range of cable and connector sizes.
          • Maximum protection for insulating and sealing electrical connections and terminations.
          • Tough outer jacket protects against abrasion, vibration and flexing.
          • May be used over lead, steel, aluminum, copper, standard plastic and all elastomeric insulations of power cables, battery cable and over all repair splices.
          • 7/16 inch i.d.
          • 6" stick
          • Red
            $0.00
            + -
            HSS6

            HEAT SHRINK HEAVY-WALL 6" STK .35" ID, BLACK, 3:1 S/R

            HSS6
            • Heavy wall polyolefin tubing with dual purpose thermoplastic liner.
            • High expansion ratios (3:1) enable a minimum number of sizes to cover a broad range of cable and connector sizes.
            • Maximum protection for insulating and sealing electrical connections and terminations.
            • Tough outer jacket protects against abrasion, vibration and flexing.
            • May be used over lead, steel, aluminum, copper, standard plastic and all elastomeric insulations of power cables, battery cable and over all repair splices.
            • 7/16 inch i.d.
            • 6" stick
            • Black
              $0.00
              + -
              MWHS1

              HEAT SHRINK MULTI-WALL 4' STK 1" ID, BLACK, 3:1 S/R

              MWHS1
              • Flame retardant polyolefin heat shrink tubing.
              • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
              • Still highly flexible for conforming to irregular shapes.
              • 3:1 shrink ratio.
              • Protection of automobile, marine and truck wire splices and harness breakouts.
              • Meets mil spec MIL-DTL-23053/4, Class 3.
              • 1 inch i.d.
              • 4 foot stick
              • Black
                $0.00
                + -
                MWHS12

                HEAT SHRINK MULTI-WALL 4' STK 1/2" ID, BLACK, 3:1 S/R

                MWHS12
                • Flame retardant polyolefin heat shrink tubing.
                • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                • Still highly flexible for conforming to irregular shapes.
                • 3:1 shrink ratio.
                • Protection of automobile, marine and truck wire splices and harness breakouts.
                • Meets mil spec MIL-DTL-23053/4, Class 3.
                • 1/2 inch i.d.
                • 4 foot stick
                • Black
                  $0.00
                  + -
                  MWHS1-12

                  HEAT SHRINK MULTI-WALL 12" STK 1" ID, BLACK, 3:1 S/R

                  MWHS1-12
                  • Flame retardant polyolefin heat shrink tubing.
                  • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                  • Still highly flexible for conforming to irregular shapes.
                  • 3:1 shrink ratio.
                  • Protection of automobile, marine and truck wire splices and harness breakouts.
                  • Meets mil spec MIL-DTL-23053/4, Class 3.
                  • 1 inch i.d.
                  • 12" stick
                  • Black
                    $0.00
                    + -
                    MWHS112

                    HEAT SHRINK MULTI-WALL 4' STK 1-1/2", BLACK, 3:1 S/R

                    MWHS112
                    • Flame retardant polyolefin heat shrink tubing.
                    • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                    • Still highly flexible for conforming to irregular shapes.
                    • 3:1 shrink ratio.
                    • Protection of automobile, marine and truck wire splices and harness breakouts.
                    • Meets mil spec MIL-DTL-23053/4, Class 3.
                    • 1-1/2 inch i.d.
                    • 4 foot stick
                    • Black
                      $0.00
                      + -
                      MWHS14

                      HEAT SHRINK MULTI-WALL 4' STK 1/4" ID, BLACK, 3:1 S/R

                      MWHS14
                      • Flame retardant polyolefin heat shrink tubing.
                      • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                      • Still highly flexible for conforming to irregular shapes.
                      • 3:1 shrink ratio.
                      • Protection of automobile, marine and truck wire splices and harness breakouts.
                      • Meets mil spec MIL-DTL-23053/4, Class 3.
                      • 1/4 inch i.d.
                      • 4 foot stick
                      • Black
                        $0.00
                        + -
                        MWHS12-12

                        HEAT SHRINK MULTI-WALL 12" STK 1/2" ID, BLACK, 3:1 S/R

                        MWHS12-12
                        • Flame retardant polyolefin heat shrink tubing.
                        • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                        • Still highly flexible for conforming to irregular shapes.
                        • 3:1 shrink ratio.
                        • Protection of automobile, marine and truck wire splices and harness breakouts.
                        • Meets mil spec MIL-DTL-23053/4, Class 3.
                        • 1/2 inch i.d.
                        • 12" stick
                        • Black
                          $0.00
                          + -
                          MWHS1-12-1

                          HEAT SHRINK MULTI-WALL 12" STK 1" ID, RED, 3:1 S/R

                          MWHS1-12-1
                          • Flame retardant polyolefin heat shrink tubing.
                          • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                          • Still highly flexible for conforming to irregular shapes.
                          • 3:1 shrink ratio.
                          • Protection of automobile, marine and truck wire splices and harness breakouts.
                          • Meets mil spec MIL-DTL-23053/4, Class 3.
                          • 1 inch i.d.
                          • 12" stick
                          • Red
                            $0.00
                            + -
                            MWHS18

                            HEAT SHRINK MULTI-WALL 4' STK 1/8" ID, BLACK, 3:1 S/R

                            MWHS18
                            • Flame retardant polyolefin heat shrink tubing.
                            • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                            • Still highly flexible for conforming to irregular shapes.
                            • 3:1 shrink ratio.
                            • Protection of automobile, marine and truck wire splices and harness breakouts.
                            • Meets mil spec MIL-DTL-23053/4, Class 3.
                            • 1/8 inch i.d.
                            • 4 foot stick
                            • Black
                              $0.00
                              + -
                              MWHS18-12-1

                              HEAT SHRINK MULTI-WALL 12" STK 1/8" ID, RED, 3:1 S/R

                              MWHS18-12-1
                              • Flame retardant polyolefin heat shrink tubing.
                              • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                              • Still highly flexible for conforming to irregular shapes.
                              • Protection of automobile, marine and truck wire splices and harness breakouts.
                              • Meets mil spec MIL-DTL-23053/4, Class 3.
                              • 1/8 inch i.d.
                              • 12" stick
                              • Red
                                $0.00
                                + -
                                MWHS34-12-1

                                HEAT SHRINK MULTI-WALL 12" STK 3/4" ID, RED, 3:1 S/R

                                MWHS34-12-1
                                • Flame retardant polyolefin heat shrink tubing.
                                • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                • Still highly flexible for conforming to irregular shapes.
                                • 3:1 shrink ratio.
                                • Protection of automobile, marine and truck wire splices and harness breakouts.
                                • Meets mil spec MIL-DTL-23053/4, Class 3.
                                • 3/4 inch i.d.
                                • 12" stick
                                • Red
                                  $0.00
                                  + -
                                  MWHS34

                                  HEAT SHRINK MULTI-WALL 4' STK 3/4" ID, BLACK, 3:1 S/R

                                  MWHS34
                                  • Flame retardant polyolefin heat shrink tubing.
                                  • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                  • Still highly flexible for conforming to irregular shapes.
                                  • 3:1 shrink ratio.
                                  • Protection of automobile, marine and truck wire splices and harness breakouts.
                                  • Meets mil spec MIL-DTL-23053/4, Class 3.
                                  • 3/4 inch i.d.
                                  • 4 foot stick
                                  • Black
                                    $0.00
                                    + -
                                    MWHS34-12

                                    HEAT SHRINK MULTI-WALL 12" STK 3/4" ID, BLACK, 3:1 S/R

                                    MWHS34-12
                                    • Flame retardant polyolefin heat shrink tubing.
                                    • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                    • Still highly flexible for conforming to irregular shapes.
                                    • 3:1 shrink ratio.
                                    • Protection of automobile, marine and truck wire splices and harness breakouts.
                                    • Meets mil spec MIL-DTL-23053/4, Class 3.
                                    • 3/4 inch i.d.
                                    • 12" stick
                                    • Black
                                      $0.00
                                      + -
                                      MWHS36

                                      HEAT SHRINK MULTI-WALL 4' STK 3/16" ID, BLACK, 3:1 S/R

                                      MWHS36
                                      • Flame retardant polyolefin heat shrink tubing.
                                      • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                      • Still highly flexible for conforming to irregular shapes.
                                      • 3:1 shrink ratio.
                                      • Protection of automobile, marine and truck wire splices and harness breakouts.
                                      • Meets mil spec MIL-DTL-23053/4, Class 3.
                                      • 3/16 inch i.d.
                                      • 4 foot stick
                                      • Black
                                        $0.00
                                        + -
                                        MWHS36-12-1

                                        HEAT SHRINK MULTI-WALL 12" STK 3/16" ID, RED, 3:1 S/R

                                        MWHS36-12-1
                                        • Flame retardant polyolefin heat shrink tubing.
                                        • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                        • Still highly flexible for conforming to irregular shapes.
                                        • 3:1 shrink ratio.
                                        • Protection of automobile, marine and truck wire splices and harness breakouts.
                                        • Meets mil spec MIL-DTL-23053/4, Class 3.
                                        • 3/16 inch i.d.
                                        • 12" stick
                                        • Red
                                          $0.00
                                          + -
                                          MWHS38

                                          HEAT SHRINK MULTI-WALL 4' STK 3/8" ID, BLACK, 3:1 S/R

                                          MWHS38
                                          • Flame retardant polyolefin heat shrink tubing.
                                          • Internal layer of thermo-plastic adhesive which provides a barrier against contaminants.
                                          • Still highly flexible for conforming to irregular shapes.
                                          • 3:1 shrink ratio.
                                          • Protection of automobile, marine and truck wire splices and harness breakouts.
                                          • Meets mil spec MIL-DTL-23053/4, Class 3.
                                          • 3/8 inch i.d.
                                          • 4 foot stick
                                          • Black
                                            $0.00
                                            + -
                                            PHS1

                                            HEAT SHRINK POLYOLEFIN 4' STK 1" ID, BLACK, 2:1 S/R

                                            PHS1
                                            • Flame retardant polyolefin heat shrink tubing.
                                            • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                                            • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                                            • 2:1 shrink ratio.
                                            • Meets mil spec MIL-I-23053/5.
                                            • 1 inch i.d.
                                            • 4' stick
                                            • Black
                                              $0.00
                                              + -
                                              PHS12

                                              HEAT SHRINK POLYOLEFIN 4' STK 1/2" ID, BLACK, 2:1 S/R

                                              PHS12
                                              • Flame retardant polyolefin heat shrink tubing.
                                              • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                                              • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                                              • 2:1 shrink ratio.
                                              • Meets mil spec MIL-I-23053/5.
                                              • 1/2 inch i.d.
                                              • 4' stick
                                              • Black
                                                $0.00
                                                + -
                                                PHS12-1

                                                HEAT SHRINK POLYOLEFIN 4' STK 1/2" ID, RED, 2:1 S/R

                                                PHS12-1
                                                • Flame retardant polyolefin heat shrink tubing.
                                                • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                                                • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                                                • 2:1 shrink ratio.
                                                • Meets mil spec MIL-I-23053/5.
                                                • 1/2 inch i.d.
                                                • 4' stick
                                                • Red
                                                  $0.00
                                                  + -
                                                  HEAT SHRINK POLYOLEFIN 4' STK 1/2" ID, BLUE, 2:1 S/R

                                                  HEAT SHRINK POLYOLEFIN 4' STK 1/2" ID, BLUE, 2:1 S/R

                                                  PHS12-6
                                                  • Flame retardant polyolefin heat shrink tubing.
                                                  • Typically used as a shrink-fit electrical insulation over cable splices and terminations.
                                                  • Can also be used as lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
                                                  • 2:1 shrink ratio.
                                                  • Meets mil spec MIL-I-23053/5.
                                                  • 1/2 inch i.d.
                                                  • 4' stick
                                                  • Blue
                                                    $0.00
                                                    + -
                                                    Refine
                                                    ×
                                                    Category
                                                    Availability