Washers
FLAT WASHER USS BLACK #10
XSFW10-2
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, black oxide finish.
- Outside Diameter: 1/2"
- Inside Diameter: 7/32"
$0.00
FENDER WASHER ZINC HEAVY DUTY 3/8" X 1-3/4" .108 THICK
X38X134FWHD
- Flat washer with more surface area than a USS or SAE washer
- Made from heavier gauge metal than most flat washers
- Used where an extra wide bearing surface is required
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel
- Inside diameter 3/8"
- Outside diameter 1-1/2"
$0.00
LOCK WASHER INT-EXT ZINC 1/4" INTERNAL-EXTERNAL TOOTH
IE14LW
- A hardened circular washer with twisted prongs or teeth protruding from both the inside and outside edges of the washer.
- Preferred in the following situations: Where a larger bearing surface is desired. For an optimum electrical connection. Where the hole is oversized or out of round. An insert between two adjustable pieces where a longitudinal or rotational adjustment must be maintained.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .256 Max .267
- Outside Diameter: Min .725 Max .760
- Thickness: Min .032 Max .040
$0.00
LOCK WASHER INT-EXT ZINC 3/16" INTERNAL-EXTERNAL TOOTH
IE36LW
- A hardened circular washer with twisted prongs or teeth protruding from both the inside and outside edges of the washer.
- Preferred in the following situations: Where a larger bearing surface is desired. For an optimum electrical connection. Where the hole is oversized or out of round. An insert between two adjustable pieces where a longitudinal or rotational adjustment must be maintained.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .195 Max .204
- Outside Diameter: Min .580 Max .610
- Thickness: Min .028 Max .034
$0.00
LOCK WASHER INTERNAL ZINC #10 INTERNAL TOOTHED
ILW10
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .195 Max .204
- Outside Diameter: Min .365 Max .381
- Thickness: Min .018 Max .024
$0.00
LOCK WASHER INTERNAL ZINC #12 INTERNAL TOOTHED
ILW12
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .221 Max .231
- Outside Diameter: Min .394 Max .410
- Thickness: Min .020 Max .027
$0.00
LOCK WASHER INTERNAL ZINC 1/4" INTERNAL TOOTHED
ILW14
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .256 Max .267
- Outside Diameter: Min .460 Max .478
- Thickness: Min .023 Max .028
$0.00
LOCK WASHER INTERNAL ZINC 3/4" INTERNAL TOOTHED
ILW34
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .768 Max .795
- Outside Diameter: Min 1.220 Max 1.245
- Thickness: Min .047 Max .055
$0.00
LOCK WASHER INTERNAL ZINC 3/8" INTERNAL TOOTHED
ILW38
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .384 Max .398
- Outside Diameter: Min .670 Max .692
- Thickness: Min .032 Max .040
$0.00
LOCK WASHER INTERNAL ZINC 1/2" INTERNAL TOOTHED
ILW50
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .513 Max .530
- Outside Diameter: Min .867 Max .900
- Thickness: Min .037 Max .045
$0.00
LOCK WASHER INTERNAL ZINC 5/16" INTERNAL TOOTHED
ILW56
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .320 Max .332
- Outside Diameter: Min .594 Max .610
- Thickness: Min .028 Max .034
$0.00
LOCK WASHER INTERNAL ZINC 5/8" INTERNAL TOOTHED
ILW58
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .641 Max .663
- Outside Diameter: Min 1.045 Max 1.071
- Thickness: Min .042 Max .050
$0.00
LOCK WASHER INTERNAL ZINC 7/16" INTERNAL TOOTHED
ILW76
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .448 Max .464
- Outside Diameter: Min .740 Max .789
- Thickness: Min .032 Max .040
$0.00