Pipe & Thread Sealants
LOCTITE 518 FLANGE SEALANT 50 ML TUBE
XLOC37394
- Noncorrosive anaerobic designed primarily for use on aluminum, iron and steel flanged mating surfaces.
- Ideal for on-the-spot and emergency repairs, or when a conventional gasket is out of stock
- Fills gaps up to 0.050" (1.27 mm) and forms a flexible, solvent-resistant seal that will not tear or decay
- Parts disassemble easily, even after extended service, and old gasket material can be removed with a putty knife
- APPLICATIONS. Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, O-ring replacement
$0.00
LOCTITE 545 THREAD SEALANT 50ML
XLOC54531
- Locks and Seals Hydraulic and Pneumatic Fittings without Fouling the System
- Pipe thread sealant designed for locking and sealing of metal pipes and fittings
- Excellent solvent resistance
- Contains no fillers or particles that could contaminate system fluids, foul valves, or clog fine filters and screens
- High lubricity for easy assembly and removal. Recommended for fine threaded fittings as used in hydraulic and pneumatic installations and small fittings in general
$0.00
LOCTITE PIPE SEALANT W/PTFE 50 ML
XLOC59231
- High temperature thread sealant.
- Medium strength anaerobic sealant with PTFE for tapered pipe threads.
- The high lubricating properties of this compound prevents galling on pipe threads and fittings.
- Provides immediate low pressure sealing and allow for the readjustment of fittings shortly after assembly.
- Will withstand temperatures up to 400°F.
- It is not recommended for use on plastic piping.
- Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels.
- Parts may be repositioned for up to 24 hours after application.
- 50 ml. tube.
$0.00
GASKET SEALANT - SPRAY ON NET WT 9 OZ, AEROSOL
XPERM99MA
- Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film
- Remains effective at temperatures of -65°F to 500°F (-54°C to 260°C).
- Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane
- Suitable for all vehicles including EV
- Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; Spray-A-Gasket® seals all felt, cork, metal, paper, and rubber
$0.00
RECTOR SEAL TRU BLUE PIPE SEALANT 8 OZ 1/2 PINT
XRS31551
- 8 ounce brush top can
- Stays flexible
- Designed for areas of high vibration and thermal expansion.
- Contains PTFE
- Brushable from 20°F to 140°F
$0.00
THREAD SEALANT W/ PTFE 16 OZ BRUSH TOP
TSWT16
- Thread sealant with PTFE.
- Temperature range -35° to 550°s F.
- A non-toxic, non-drying thread sealing compound.
- Consists of a blend of non-melting grease, PTFE particles and other insert solid fillers.
- Engineered to produce a leak-proof seal.
- Does not contain lead, graphite, molybdenum disulfide, or clay fillers.
- Can be used to seal all thread joints in plastic, aluminum, metal, or stainless steel linens against water, natural gas, LPG, gasoline and other services.
- Effective on connections, bolts, flange seals, air conditioning fittings, temperature sending fittings, and hydraulic fittings.
- Net 16 ounce brush top jar.
$0.00
THREAD SEALANT W/PTFE 4 OZ BRUSH TOP
TSWT4
- Thread sealant with PTFE.
- Temperature range -35° to 550°s F.
- A non-toxic, non-drying thread sealing compound.
- Consists of a blend of non-melting grease, PTFE particles and other insert solid fillers.
- Engineered to produce a leak-proof seal.
- Does not contain lead, graphite, molybdenum disulfide, or clay fillers.
- Can be used to seal all thread joints in plastic, aluminum, metal, or stainless steel linens against water, natural gas, LPG, gasoline and other services.
- Effective on connections, bolts, flange seals, air conditioning fittings, temperature sending fittings, and hydraulic fittings.
- Net 4 ounce brush top jar.
$0.00
PIPE SEALANT STICK LOCTITE, NET WT 19 GRAM
LOC37615
- Loctite thread sealant stick.
- No drips, no spills, no errors.
- Solid stick formula offers greater flexibility for tough applications, especially overhead.
- Compact, easy to carry from job to job.
- Solid formula also means they won't spill or leak in a toolbox or on shop floors.
- Single component, semi-solid anaerobic pipe sealing compound.
- Cures rapidly to provide immediate low pressure sealing.
- Prevents galling and protects mated threaded areas from rust and corrosion.
- Recommended for sealing metal tapered pipe threads and fittings.
- 19 gram stick.
$0.00
PIPE SEALANT W/PTFE NET WT 50 ML TUBE
PSWT
- Pipe sealant with PTFE
- Designed to create a positive seal between metal fittings for low and high pressure sealing.
- Designed to cure when in contact with metals, and without air by anaerobic reaction.
- This product cures to a solid plastic, completely sealing against hydraulic fluids, air, most gases, and most chemicals.
- An excellent replacement for pipe dopes and pipe tapes. White in color.
- Temperature range of -60°F to 450°F.
- Locks pipe and fittings against vibration loosening, tampering, and variable temperature effects.
- Can be used on a wide range of metal parts and it's controlled strength feature allows for easy disassembly.
- Applications include automotive, appliance, construction, fire protection, plumbing, utilities, petroleum refining, and chemical processing.
- 50 mil tube.
$0.00
LOCTITE 545 HYDRAULIC/PNEUMAT THREAD SEALANT 36 ML
XLOC37482
- Loctite thread sealant 545
- Designed for locking and sealing high pressure pneumatic and hydraulic systems.
- Contains no fillers or particles that could contaminate system fluids, foul valves, or clog fine filters and screens.
- Controlled locking strength allows for easy disassembly.
- 36 ml bottle
$0.00