Washers
AUVECO COPPER WASHERS 1/2", ID 7/8", OD 1/16" THICK 25/BOX
XA15918
- COPPER WASHER 1/2 I.D. 7/8 O.D. 1/16 THICK
- Bolt Size : 7/16"
- Nominal Size : 1/2" x 7/8"
- Inner Diameter : .5"
- Outer Diameter : .875"
$0.00
LOCK WASHER INTERNAL STAINLESS #10 INTERNAL TOOTHED
XILW10SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from stainless steel.
- Inside Diameter: Min .221 Max .231
- Outside Diameter: Min .394 Max .410
$0.00
LOCK WASHER SPLIT STAINLESS 1/4"
LW14SS
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Stainless Steel.
- Resists loosening caused by vibration and corrosion.
- For use with stainless nuts and screws of a similar stainless alloy.
- Rockwell Hardness: C35-43
- Inside Diameter: Min .252 Max .260
- Outside Diameter: 0.487
$0.00
LOCK WASHER SPLIT STAINLESS #8"
LW8SS
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Stainless Steel.
- Resists loosening caused by vibration and corrosion.
- For use with stainless nuts and screws of a similar stainless alloy.
- Rockwell Hardness: C35-43
- Inside Diameter: Min .167 Max .174
- Outside Diameter: 0.293
$0.00
FLAT WASHER BONDED SEALING 1/4" STAINLESS
XBSW14SS
- Neoprene Bonded Washer
- 18-8 Stainless
- Outside Diameter: 3/4"
$0.00
FLAT WASHER METRIC ZINC M20 CL10
XFW20M10
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: M21
- Outside Diameter: M37
$0.00
FLAT WASHER USS 5/8" STAINLESS
XFW58SS
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Used where parts are subject to corrosion.
- Made from 18-8 stainless steel.
- Outside Diameter: 1-1/2"
$0.00