Nuts
KEP NUT UNC STAINLESS #4-40
XKN440SS
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Stainless Steel.
KEP NUT UNC STAINLESS #8-32
XKN832SS
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Stainless Steel.
HEX FLANGE NUT LARGE FLANGE ZINC 1/4"-20
XLFN1420
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Low carbon steel.
LOCK NUT NYLON UNC BRASS #10-24
XLN1024BR
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
BRASS LOCK NUT NYLON UNC 1/2"-13
XLN1213BR
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
BRASS LOCK NUT NYLON UNF 1/2"-20
XLN1220BR
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
BRASS LOCK NUT NYLON UNC 1/4"-20
XLN1420B
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
LOCK NUT NYLON UNC ZINC 1"-8 GR 2
XLN18
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: 1"-8.
- Zinc plated.
BRASS LOCK NUT NYLON UNC 3/8"-16
XLN3816BR
- Hexagonal shape Nylon Lock Nut
- Nylon material creates pressure against the fastener
- Forces the bottom threads of the fastener against the top threads of the bolt
- Creates a better hold
- Locks the nut into place so it will not vibrate loose
- Corrosion Resistant Brass
LOCK NUT NYLON STAINLESS #4-40
XLN440SS
- 18.8 Stainless Steel
- 4-40 Thread size
- These locknuts have good chemical resistance and may be mildly magnetic
- The nylon insert grips the bolt to resist loosening without damaging threads
- They're reusable, but their holding power lessens with each use
BRASS LOCK NUT NYLON UNC 5/16"-18
XLN5618BR
- Hexagonal shape Nylon Lock Nut
- Nylon material creates pressure against the fastener
- Forces the bottom threads of the fastener against the top threads of the bolt
- Creates a better hold
- Locks the nut into place so it will not vibrate loose
- Corrosion Resistant Brass
Refine