Nuts
HEX NUT UNF ZINC 3/8"-24 GR 8
8N3824
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 3/8"-24.
- Yellow zinc plated.
$0.00
HEX NUT METRIC ZINC M12-1.75 CL 10
XM12X1.75N10
- A hex nut with a metric thread pitch.
- Class 10.
- Intended for use with screws and bolts of property class 10.9 or lower.
- Widely used in farm equipment and automotive related industries.
- Made from low carbon steel.
- Size: M12-1.75.
$0.00
HEX FLANGE NUT PLAIN 1/2"-13 GR 8
X8FN1213
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Non-serrated.
- Meet SAE J995.
- Normally used in conjunction with grade 8 frame/flange bolts.
- Size: 1/2"-13.
$0.00
KEP NUT UNC ZINC #10-24
KN1024
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: #10-24.
$0.00
TEE NUT 3 PRONG ZINC 1/4"-20
X1420TNUT
- FASTENERS
- NUTS
- 3 prong tee nut
- Provide a quick and easy method for mating machine threaded components to wooden parts installing threaded glides, casters, and more.
- Inner thread pitch 1/4"-20
$0.00
HEX NUT UNC ZINC 1/2"-13 GR 8
8N1213
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1/2"-13.
- Yellow zinc plated.
$0.00
HEX NUT UNC ZINC 3/8"-16 GR 8
8N3816
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 3/8"-16.
- Yellow zinc plated.
$0.00
HEX NUT UNC ZINC 5/16"-18 GR 8
8N5618
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 5/16"-18.
- Yellow zinc plated.
$0.00
KEP NUT UNF ZINC #10-32
KN1032
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: #10-32.
$0.00
HEX NUT METRIC ZINC M12-1.75 CL 8
M12X1.75N
- A hex nut with a metric thread pitch.
- Class 8.
- Intended for use with screws and bolts of property class 8.8 or lower.
- Widely used in the automotive and electronics industry.
- Made from low carbon steel.
- Size: M12-1.75.
$0.00
HEX NUT UNC ZINC 5/8"-11 GR 8
8N5811
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 5/8"-11.
- Yellow zinc plated.
$0.00
LOCK NUT STOVER UNF ZINC 3/8"-24 GRADE C
8SLN3824
- Stover lock nuts, also called Grade C automation lock nuts.
- All metal, one-piece hex nut which derives it prevailing torque characteristics from controlled distortion of it top threads from their normal helical form to a more elliptical shape.
- Can withstand temperatures up to 450°s F.
- Can withstand severe vibration and shock loads.
- Frequently used in farm machinery, plus the automotive and related metalworking industries.
- Proof load 150,000 psi.
- Zinc plated.
- Size: 3/8"-24.
$0.00
LOCK NUT NYLON UNC ZINC 5/16"-18 GR 2
LN5618
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: 5/16"-18.
- Zinc plated.
$0.00
LOCK NUT NYLON UNC BRASS #10-24
XLN1024BR
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
$0.00
HEX NUT METRIC ZINC M5-0.8 CL 10
XM5X0.8N10
- A hex nut with a metric thread pitch.
- Class 10.
- Intended for use with screws and bolts of property class 10.9 or lower.
- Widely used in farm equipment and automotive related industries.
- Made from low carbon steel.
- Size: M5-.80.
$0.00
LOCK NUT NYLON UNC STAINLESS 1/4"-20
LN1420SS
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with stainless steel machine screws and bolts.
- Reusable.
- The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
- Made form 18-8 or equivalent stainless steel.
- Size: 1/4"-20.
$0.00
LOCK NUT STOVER UNC ZINC 7/16"-14 GRADE C
8SLN7614
- Stover lock nuts, also called Grade C automation lock nuts.
- All metal, one-piece hex nut which derives it prevailing torque characteristics from controlled distortion of it top threads from their normal helical form to a more elliptical shape.
- Can withstand temperatures up to 450°s F.
- Can withstand severe vibration and shock loads.
- Frequently used in farm machinery, plus the automotive and related metalworking industries.
- Proof load 150,000 psi.
- Zinc plated.
- Size: 7/16"-14.
$0.00
HEX NUT UNC ZINC 1/4"-20 GR 5
N1420
- A finished hex nut made from low carbon steel.
- For use with grade 5 bolts.
- Proof load: 120,000 psi.
- Size: 1/4"-20.
- Zinc plated.
$0.00
HEX NUT STAINLESS UNC 1/4"-20
SSN1420
- A finished hex nut made from stainless steel.
- For use with grade stainless steel cap screws.
- Proof load: 100,000 psi.
- Corrosion resistant 18-8 stainless steel alloy.
- Size: 1/4"-20.
$0.00
HEX NUT STAINLESS UNC 1/2"-13
SSN1213
- A finished hex nut made from stainless steel.
- For use with grade stainless steel cap screws.
- Proof load: 100,000 psi.
- Corrosion resistant 18-8 stainless steel alloy.
- Size: 1/2"-13.
$0.00
HEX NUT STAINLESS UNC 3/8"-16
SSN3816
- A finished hex nut made from stainless steel.
- For use with grade stainless steel cap screws.
- Proof load: 100,000 psi.
- Corrosion resistant 18-8 stainless steel alloy.
- Size: 3/8"-16.
$0.00
HEX NUT STAINLESS UNC 5/16"-18
SSN5618
- A finished hex nut made from stainless steel.
- For use with grade stainless steel cap screws.
- Proof load: 100,000 psi.
- Corrosion resistant 18-8 stainless steel alloy.
- Size: 5/16"-18.
$0.00
HEX NUT STAINLESS UNC #6-32
SSN632
- A finished hex nut made from stainless steel.
- For use with grade stainless steel screws.
- Proof load: 100,000 psi.
- Corrosion resistant 18-8 stainless steel alloy.
- Size: #6-32.
$0.00