Nuts
HEX FLANGE NUT ZINC #10-32 SERRATED
XFN1032
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Grade A case hardened.
- Size: #10-32.
$0.00
HEX FLANGE NUT ZINC 5/16"-18
XFN5618
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Grade A case hardened.
- Size: 5/16"-18.
$0.00
HEX FLANGE NUT ZINC 5/8"-11 SERRATED
XFN5811
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Grade A case hardened.
- Size: 5/8"-11.
$0.00
HEX FLANGE NUT ZINC #6-32
XFN632
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Grade A case hardened.
- Size: #6-32.
$0.00
HEX FLANGE NUT METRIC ZINC M6-1.0
XFN6M
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Size: M6-1.00.
$0.00
HEX FLANGE NUT METRIC M6-1.0 STAINLESS
XFN6MSS
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Size: M6-1.0
- Stainless Steel
$0.00
HEAVY HEX NUT ZINC 5/16"-18
XHN5618
- A hex nut that is both thicker and wider across the flats than a same sized finish hex nut.
- Strongest of all comparably graded nuts because of its greater length of thread engagement and greater resistance to dilation.
- Made from low carbon steel.
- Proof load: 100,000 psi.
- Zinc plated.
- Size: 5/16"-18.
$0.00
HEAVY HEX NUT STAINLESS 5/16"-18
XHN5618SS
- A hex nut that is both thicker and wider across the flats than a same sized finish hex nut.
- Strongest of all comparably graded nuts because of its greater length of thread engagement and greater resistance to dilation.
- Made from stainless carbon steel.
- Size: 5/16-18".
$0.00
HEX JAM NUT ZINC 3/4"-10
XJN3410
- A hex nut which is only 2/3 the thickness of a full form nut.
- Jam nuts are tightened against the work surface and a finished or heavy hex nut is tightened against the jam nut to keep it from loosening.
- Made from low carbon zinc plated steel.
- Proof load: 54,000 psi.
- Zinc plated.
- Size: 3/4"-10.
$0.00
HEX JAM NUT ZINC 3/4"-16
XJN3416
- A hex nut which is only 2/3 the thickness of a full form nut.
- Jam nuts are tightened against the work surface and a finished or heavy hex nut is tightened against the jam nut to keep it from loosening.
- Made from low carbon zinc plated steel.
- Proof load: 48,000 psi.
- Zinc plated.
- Size: 3/4"-16.
$0.00
HEX FLANGE NUT LARGE FLANGE ZINC 1/4"-20
XLFN1420
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Low carbon steel.
$0.00