Nuts
LOCK NUT NYLON UNC ZINC 1/4"-20 GR 2 THIN PATTERN
XTLN1420
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
HEX FLANGE NUT METRIC ZINC M6-1.00, SERRATED, 10.9
XFN6M10
- Hex Flange Nut
- Metric Zinc
- M6-1.00
- Serrated
- 10.9 class
KEP NUT UNC ZINC #4-40
XKN440
- Keps Nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation
KEP NUT UNF ZINC #10-32
KN1032
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: #10-32.
KEP NUT UNC ZINC #10-24
KN1024
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: #10-24.
KEP NUT UNC ZINC #12-24
KN1224
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: #12-24.
KEP NUT UNC ZINC 1/4"-20
KN1420
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: 1/4"-20.
KEP NUT UNC ZINC 3/8"-16
KN3816
- Keps nuts, also known as K lock nuts
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: 3/8"-16.
KEP NUT UNC ZINC 5/16"-18
KN5618
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: 5/16"-18.
KEP NUT UNC ZINC #8-32
KN832
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: #8-32.
KEP NUT UNC ZINC #6-32
KN632
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: #6-32.
LOCK NUT NYLON UNC STAINLESS #10-24
LN1024SS
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with stainless steel machine screws and bolts.
- Reusable.
- The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
- Made form 18-8 or equivalent stainless steel.
- Size: #10-24.
LOCK NUT NYLON UNC ZINC 1/2"-13 GR 2
LN1213
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: 1/2"-13.
- Zinc plated.
LOCK NUT NYLON UNC STAINLESS 1/2"-13
LN1213SS
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with stainless steel machine screws and bolts.
- Reusable.
- The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
- Made form 18-8 or equivalent stainless steel.
- Size: 1/2"-13.
LOCK NUT NYLON UNC ZINC #10-24 GR 2
LN1024
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: #10-24.
- Zinc plated.
LOCK NUT NYLON UNF STAINLESS #10-32
LN1032SS
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with stainless steel machine screws and bolts.
- Reusable.
- The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
- Made form 18-8 or equivalent stainless steel.
- Size: #10-32.
LOCK NUT NYLON UNC ZINC #12-24 GR 2
LN1224
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: #12-24.
- Zinc plated.
LOCK NUT NYLON UNF ZINC 1/2"-20 GR 2
LN1220
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: 1/2"-20.
- Zinc plated.
LOCK NUT NYLON UNF ZINC #10-32 GR 2
LN1032
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: #10-24.
- Zinc plated.
LOCK NUT NYLON UNC STAINLESS #12-24
LN1224SS
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with stainless steel machine screws and bolts.
- Reusable.
- The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
- Made form 18-8 or equivalent stainless steel.
- Size: #12-24.
Refine