Nuts
LOCK NUT NYLON UNC ZINC 1/4"-20 GR 2 THIN PATTERN
XTLN1420
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
HEX FLANGE NUT PLAIN 1/2"-13 GR 8
X8FN1213
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Non-serrated.
- Meet SAE J995.
- Normally used in conjunction with grade 8 frame/flange bolts.
- Size: 1/2"-13.
LOCK NUT NYLON UNC ZINC 5/16"-18 GR 2
LN5618
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: 5/16"-18.
- Zinc plated.
LOCK NUT NYLON UNC ZINC 9/16"-12 GR 2
LN9612
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: 9/16"-12.
- Zinc plated.
LOCK NUT NYLON UNC ZINC 3/8"-16 GR 8
X8LN3816
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used in structural application with Grade 8 cap screws or bolts.
- Applications include engines, turbines, hydraulic cylinders, railroads and aerospace.
- Nylon inserts nuts are not designed to be used at temperatures over 250° F.
- Made from heat treated steel.
- Proof load: 150,000 psi.
- Size: 3/8"-16.
- Yellow zinc plated.
LOCK NUT NYLON UNF ZINC 5/8"-18 GR 8
X8LN5818B
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used in structural application with Grade 8 cap screws or bolts.
- Applications include engines, turbines, hydraulic cylinders, railroads and aerospace.
AUVECO RUBBER WELL NUT 10-32 SCREW 3/8" HOLE SIZE BLACK 10/BX
XA13009
- Material: Neoprene with captive brass nut
- #10-32 threads
- Head diameter .562"
- Overal length .665"
- Shank diameter .377"
HEX FLANGE NUT METRIC ZINC M6-1.0
XFN6M
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Size: M6-1.00.
HEX FLANGE NUT ZINC #10-32 SERRATED
XFN1032
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Grade A case hardened.
- Size: #10-32.
KEP NUT UNC STAINLESS #6-32
XKN632SS
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Stainless Steel.
HEX JAM NUT STAINLESS 1/2"-20
XJN1220SS
- A hex nut which is only 2/3 the thickness of a full form nut.
- Jam nuts are tightened against the work surface and a finished or heavy hex nut is tightened against the jam nut to keep it from loosening.
- Made from stainless steel.
- Size: 1/2-20".
HEX NUT STAINLESS UNC 5/8"-11
XSSN5811
- A finished hex nut made from stainless steel.
- For use with grade stainless steel cap screws.
- Proof load: 100,000 psi.
- Corrosion resistant 18-8 stainless steel alloy.
- Size: 1/2"-13.
Refine