Washers
FLAT WASHER METRIC PLAIN M8
XFW8MPL
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, plain plated.
- Inside Diameter: Min 8.4 Max 8.62
- Outside Diameter: Min 15.57 Max 16
$0.00
FLAT WASHER USS 316 STAINLESS #8
XFW8SS316
- Used to improve stress distribution, and to span large holes
- USS PATTERN
- 316 Stainless
$0.00
LOCK WASHER INTERNAL STAINLESS #6 INTERNAL TOOTHED
XILW6SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from stainless steel.
- Inside Diameter: Min .221 Max .231
- Outside Diameter: Min .394 Max .410
$0.00
LOCK WASHER INTERNAL STAINLESS 3/8" INTERNAL TOOTHED
XILW38SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Stainless Steel
- Inside Diameter: Min .384 Max .398
- Outside Diameter: Min .670 Max .692
- Thickness: Min .032 Max .040
$0.00
LOCK WASHER INTERNAL STAINLESS #8 INTERNAL TOOTHED
XILW8SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Stainless Steel
- Inside Diameter: Min.168 Max .176
- Outside Diameter: Min .325 Max .340
- Thickness: Min .018 Max .023
$0.00
FENDER WASHER STAINLESS 1/4" X 1-1/2"
X14X112FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
$0.00
FENDER WASHER STAINLESS 1/4" X 1-1/4"
X14X114FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1-1/4"
$0.00
FENDER WASHER STAINLESS 1/4" X 1"
X14X1FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1"
$0.00
FENDER WASHER ZINC 1/4" X 2"
X14X2FW
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/4"
$0.00
LOCK WASHER EXTERNAL ZINC 5/16" EXTERNAL TOOTHED
ELW56
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .320 Max .332
- Outside Diameter: Min .588 Max .610
- Thickness: Min .028 Max .034
$0.00
FLAT WASHER USS ZINC 1/4" THRU HARDENED
8FW14
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 3/4"
- Inside Diameter: 5/16"
$0.00
LOCK WASHER SPLIT USS ZINC 1/4" HIGH ALLOY
8LW14
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .252 Max .260
- Outside Diameter: 0.487
$0.00
LOCK WASHER SPLIT USS ZINC 7/16" HIGH ALLOY
8LW76
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .440 Max .450
- Outside Diameter: 0.776
$0.00
FLAT WASHER SAE ZINC 5/16" THRU HARDENED
8SFW56
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 11/16"
- Inside Diameter: 11/32"
$0.00
FLAT WASHER USS ZINC 5/16" THRU HARDENED
8FW56
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 7/8"
- Inside Diameter: 3/8"
$0.00