Washers
FLAT WASHER USS STAINLESS 7/16"
FW76SS
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Used where parts are subject to corrosion.
- Made from 18-8 stainless steel.
- Outside Diameter: 1-1/4"
- Inside Diameter: 1/2"
$0.00
FLAT WASHER USS ZINC 7/16"
FW76
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 1-1/4"
- Inside Diameter: 1/2"
$0.00
FLAT WASHER METRIC ZINC M7
FW7M
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: Min 7.4 Max 7.62
- Outside Diameter: Min 13.57 Max 14
$0.00
FLAT WASHER USS ZINC 7/8"
FW78
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 2-1/4"
- Inside Diameter: 15/16"
$0.00
FLAT WASHER METRIC ZINC M8
FW8M
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: Min 8.4 Max 8.62
- Outside Diameter: Min 15.57 Max 16
$0.00
FLAT WASHER USS STAINLESS #8
FW8SS
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Used where parts are subject to corrosion.
- Made from 18-8 stainless steel.
$0.00
FLAT WASHER USS ZINC 9/16"
FW96
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 1-1/2"
- Inside Diameter: 5/8"
$0.00
LOCK WASHER EXTERNAL ZINC #12 EXTERNAL TOOTHED
ELW12
- A hardened circular washer with twisted prongs or teeth which extend out from the outer edge of the washer.
- Most common of all tooth-lock washers.
- Offers the greatest locking efficiency since the teeth are on the largest radius.
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50
- Inside Diameter: Min .221 Max .231
- Outside Diameter: Min .460 Max .475
- Thickness: Min .020 Max .027
$0.00
FENDER WASHER USS ZINC 5/16" X 1-1/2"
56X112FW
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 5/16"
- Outside Diameter: 1-1/2"
$0.00
FENDER WASHER ZINC HEAVY DUTY 5/16" X 1-1/2"
56X112FWHD
- A flat washer with more surface area than a USS or SAE washer.
- Made from heavier gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 5/16"
- Outside Diameter: 1-1/2"
$0.00
FENDER WASHER USS ZINC 5/16" X 1-1/4"
56X114FW
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 5/16"
- Outside Diameter: 1-1/4"
$0.00
FLAT WASHER SAE ZINC 1/4" THRU HARDENED
8SFW14
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 5/8"
- Inside Diameter: 9/32"
$0.00
FLAT WASHER SAE ZINC 3/8" THRU HARDENED
8SFW38
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 13/16"
- Inside Diameter: 13/32"
$0.00
FLAT WASHER SAE ZINC 3/4" THRU HARDENED
8SFW34
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 1-1/2"
- Inside Diameter: 13/16"
$0.00
FLAT WASHER SAE ZINC 1/2" THRU HARDENED
8SFW50
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 1-1/16"
- Inside Diameter: 17/32"
$0.00
FLAT WASHER SAE ZINC 5/16" THRU HARDENED
8SFW56
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 11/16"
- Inside Diameter: 11/32"
$0.00
FLAT WASHER SAE ZINC 1/4" THRU HARDENED 1000/BAG
8SFW14-M
- Used to improve stress distribution, and to span large holes
- SAE PATTERN
- Made from heat treated thru-hardened steel
- Outside Diameter: 5/8″
- Inside Diameter: 9/32″
- Case Quantity: 1,000
- Yellow zinc plated
$0.00
FLAT WASHER SAE ZINC 5/8" THRU HARDENED
8SFW58
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 1-5/16"
- Inside Diameter: 21/32"
$0.00
FLAT WASHER SAE ZINC 7/16" THRU HARDENED
8SFW76
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 59/64"
- Inside Diameter: 15/32"
$0.00
FLAT WASHER SAE ZINC 7/8" THRU HARDENED
8SFW78
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 1-3/4"
- Inside Diameter: 15/16"
$0.00
FLAT WASHER SAE ZINC 9/16" THRU HARDENED
8SFW96
- Used to improve stress distribution, and to span large holes.
- Yellow zinc plated.
- Made from heat treated thru-hardened steel.
- SAE PATTERN
- Outside Diameter: 1-3/16"
- Inside Diameter: 19/32"
$0.00
LOCK WASHER INTERNAL ZINC 1/4" INTERNAL TOOTHED
ILW14
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .256 Max .267
- Outside Diameter: Min .460 Max .478
- Thickness: Min .023 Max .028
$0.00
LOCK WASHER INTERNAL ZINC 3/4" INTERNAL TOOTHED
ILW34
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .768 Max .795
- Outside Diameter: Min 1.220 Max 1.245
- Thickness: Min .047 Max .055
$0.00
LOCK WASHER INTERNAL ZINC 3/8" INTERNAL TOOTHED
ILW38
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from spring steel, zinc plated.
- Rockwell Hardness: C40-50.
- Inside Diameter: Min .384 Max .398
- Outside Diameter: Min .670 Max .692
- Thickness: Min .032 Max .040
$0.00