Washers
LOCK WASHER INTERNAL STAINLESS #6 INTERNAL TOOTHED
XILW6SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from stainless steel.
- Inside Diameter: Min .221 Max .231
- Outside Diameter: Min .394 Max .410
$0.00
LOCK WASHER INTERNAL STAINLESS 3/8" INTERNAL TOOTHED
XILW38SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Stainless Steel
- Inside Diameter: Min .384 Max .398
- Outside Diameter: Min .670 Max .692
- Thickness: Min .032 Max .040
$0.00
LOCK WASHER INTERNAL STAINLESS #8 INTERNAL TOOTHED
XILW8SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Stainless Steel
- Inside Diameter: Min.168 Max .176
- Outside Diameter: Min .325 Max .340
- Thickness: Min .018 Max .023
$0.00
FENDER WASHER STAINLESS 1/4" X 1-1/2"
X14X112FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
$0.00
FENDER WASHER STAINLESS 1/4" X 1-1/4"
X14X114FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1-1/4"
$0.00
FENDER WASHER STAINLESS 1/4" X 1"
X14X1FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1"
$0.00
FENDER WASHER ZINC 1/4" X 2"
X14X2FW
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/4"
$0.00
FLAT WASHER USS ZINC 1/2" THRU HARDENED
8FW50
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 1-3/8"
- Inside Diameter: 9/16"
$0.00
FLAT WASHER USS ZINC 9/16" THRU HARDENED
8FW96
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 1-1/2"
- Inside Diameter: 5/8"
$0.00
LOCK WASHER SPLIT USS ZINC 1/4" HIGH ALLOY 1000/BAG
8LW14-M
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, yellow zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with grade 8 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .252 Max .260
- Outside Diameter: 0.487
$0.00
FLAT WASHER USS STAINLESS #10 1000/BAG
FW10SS-M
- Used to improve stress distribution, and to span large holes
- USS PATTERN
- Used where parts are subject to corrosion
- Made from 18-8 stainless steel
- Case Quantity: 1,000
$0.00
FLAT WASHER USS STAINLESS 5/16"
FW56SS
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Used where parts are subject to corrosion.
- Made from 18-8 stainless steel.
- Outside Diameter: 7/8"
- Inside Diameter: 3/8"
$0.00
FLAT WASHER SAE ZINC #12
SFW12
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 9/16"
- Inside Diameter: 1/4"
$0.00
FLAT WASHER SAE ZINC #6
SFW6
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 3/8"
- Inside Diameter: 5/32"
$0.00
LOCK WASHER SPLIT METRIC ZINC M10
LW10M
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, zinc plated.
- Resists loosening caused by vibration and corrosion.
- For use with metric bolts and screws.
- Rockwell Hardness: C44-51
- Inside Diameter: Min 10.2 Max 10.7
- Outside Diameter: 18.1
$0.00
LOCK WASHER SPLIT STAINLESS 1/4"
LW14SS
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Stainless Steel.
- Resists loosening caused by vibration and corrosion.
- For use with stainless nuts and screws of a similar stainless alloy.
- Rockwell Hardness: C35-43
- Inside Diameter: Min .252 Max .260
- Outside Diameter: 0.487
$0.00
AUVECO NYLON 1/4" FLAT WASHERS 100/BOX
XA13899
- NYLON FLAT WASHER 1/4 BOLT .281 ID .030 THICK
- Inner Diameter : 0.266-0.296"
- Outer Diameter : 0.485-0.515"
- Thickness : 0.029-0.031"
- Material : Natural Nylon
$0.00
