Pins
ROLL PIN - PLAIN FINISH 5/6" X 2-1/2"
56212RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/16
- Length is 2-1/2 inches
$0.00
CLEVIS PIN - ADJUSTABLE PLAIN 5/16" DIA. 2-1/2" LONG
56212ACP
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 5/16".
- Length: 2-1/2".
$0.00
ROLL PIN - PLAIN FINISH 5/6" X 2"
562RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/16
- Length is 2 inches
$0.00
ROLL PIN - PLAIN FINISH 5/64" X 1-1/2"
564112RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/64
- Length is 1-1/2 inches
$0.00
ROLL PIN - PLAIN FINISH 5/64" X 1/2"
56412RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/64
- Length is 1/2 inch
$0.00
ROLL PIN - PLAIN FINISH 5/64" X 3/8"
56438RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/64
- Length is 3/8 inch
$0.00
ROLL PIN - PLAIN FINISH 5/64" X 1"
5641RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/64
- Length is 1 inch
$0.00
COTTER PIN - ZINC 5/16" X 2"
56X2CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 5/16 inch
- Length is 2 inches
$0.00
COTTER PIN - ZINC 5/6" X 3"
56X3CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 5/16 inch
- Length is 3 inches
$0.00
COTTER PIN - ZINC 5/16" X 4"
56X4CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 5/16 inch
- Length is 4 inches
$0.00
COTTER PIN - ZINC 5/6" X 5"
56X5CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 5/16 inch
- Length is 5 inches
$0.00
HITCH PIN - ZINC .177 DIAMETER, 3-1/4 LENGTH
HP206
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.177.
- Length of 3-1/4 inches.
$0.00
HITCH PIN - ZINC .093 DIAMETER, 2-5/16" LENGTH
HP207
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.093.
- Length of 2-5/16 inches.
$0.00
HITCH PIN - ZINC .177 DIAMETER, 3-3/4 LENGTH
HP208
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.177.
- Length of 3-3/4 inches.
$0.00
HITCH PIN - ZINC .08 DIAMETER, 1-3/16 LENGTH
HP213
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.08.
- Length of 1-3/16 inches.
$0.00
HITCH PIN - ZINC .125 DIAMETER, 1-15/16" LENGTH
HP216
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.125.
- Length of 1-15/16 inches.
$0.00
HITCH PIN - ZINC .062 DIAMETER, 1-9/16A" LENGTH
HP218
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.062.
- Length of 1-9/16 inches.
$0.00
HITCH PIN - ZINC .243 DIAMETER, 4 LENGTH
HP219
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.243.
- Length of 4 inches.
$0.00
HITCH PIN - ZINC .062 DIAMETER, 1-5/16 LENGTH
HP222
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.062.
- Length of 1-5/16 inches.
$0.00
HITCH PIN - ZINC .042 DIAMETER, 1 LENGTH
HP223
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.042.
- Length of 1 inches.
$0.00
HITCH PIN - ZINC .125 DIAMETER, 2-1/2" LENGTH
HP227
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.125.
- Length of 2-1/2 inches.
$0.00
ROLL PIN - PLAIN FINISH 3/32" X 1"
3321RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 1 inch
$0.00
ROLL PIN - PLAIN FINISH 1/2" X 1-1/2"
X12112RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/2
- Length is 1-1/2 inch
$0.00
ROLL PIN - PLAIN FINISH 1/2" X 2"
X122RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/2
- Length is 2 inchs
$0.00
