Pins
SNAP PIN 1/4 X 2 1/2 DOUBLE WIRE HANDLE
XB28-07
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 1/4" diameter
- 2-1/2" grip
$26.449
$2.6449
$2.6449
SNAP PIN DOUBLE WIRE HANDLE 5/16 X 1 3/4
XB28-08
- Shank Length: 2"
- Effective Length: 1-3/4"
- Round Two Wire Snap Pin
- Diameter: 5/16"
- Low Carbon Steel
- Zinc Clear
$31.304
$3.1304
$3.1304
LOCKING PINS 1/4 X 2-1/4 SQUARE DOUBLE WIRE
XSNAP-250-2250S
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 1/4" diameter
- 2-1/4" grip
$28.841
$2.8841
$2.8841
LOCKING PINS 1/4 X 1-3/8 ROUND DOUBE-WIRE
XSNAP-250-1375R
- Shank Length: 1-5/8"
- Effective Length: 1-3/8"
- Round Two Wire Snap Pin
- Diameter: 1/4"
- Low Carbon Steel
- Zinc Yellow
$65.2125
$2.6085
$2.6085
DIAPER PIN .243DIA 5"LENGTH 2-1/4 WIDTH
XSPF2435000B
- Overall Length: 8.86"
- Effective Length: 5"
- Heavy Duty Hard Drawn Spring Wire
- Diameter: .243
- Zinc Clear
- Material: Hard drawn spring wire
$202.438
$10.1219
$10.1219
HITCH PIN - ZINC .177 DIAMETER, 3-3/4 LENGTH
HP208
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.177.
- Length of 3-3/4 inches.
$40.1375
$1.6055
$1.6055
HITCH PIN - ZINC .08 DIAMETER, 1-3/16 LENGTH
HP213
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.08.
- Length of 1-3/16 inches.
$17.055
$0.3411
$0.3411
HITCH PIN - ZINC .125 DIAMETER, 1-15/16" LENGTH
HP216
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.125.
- Length of 1-15/16 inches.
$13.86
$0.5544
$0.5544
HITCH PIN - ZINC .148 DIAMETER, 3-5/16 LENGTH
HP209
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.148.
- Length of 3-5/16 inches.
$22.3825
$0.8953
$0.8953
HITCH PIN - ZINC .062 DIAMETER, 1-9/16A" LENGTH
HP218
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.062.
- Length of 1-9/16 inches.
$17.875
$0.3575
$0.3575
HITCH PIN - ZINC .243 DIAMETER, 4 LENGTH
HP219
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.243.
- Length of 4 inches.
$25.896
$2.5896
$2.5896
HITCH PIN - ZINC .062 DIAMETER, 1-5/16 LENGTH
HP222
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.062.
- Length of 1-5/16 inches.
$17.34
$0.3468
$0.3468
HITCH PIN - ZINC .042 DIAMETER, 1 LENGTH
HP223
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.042.
- Length of 1 inches.
$17.56
$0.3512
$0.3512
HITCH PIN - ZINC .125 DIAMETER, 2-1/2" LENGTH
HP227
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.125.
- Length of 2-1/2 inches.
$19.26
$0.7704
$0.7704
COTTER PIN - ZINC 3/8" X 4"
38X4CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/8 inch
- Length is 4 inches
$57.6725
$2.3069
$2.3069
COTTER PIN - ZINC 3/8" X 5"
38X5CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/8 inch
- Length is 5 inches
$72.785
$2.9114
$2.9114
ROLL PIN - PLAIN FINISH 5/32" X 1-1/2"
532112RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/32
- Length is 1-1/2 inches
$17.04
$0.3408
$0.3408
ROLL PIN - PLAIN FINISH 5/32" X 1-1/4"
532114RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/32
- Length is 1-1/4 inches
$14.70
$0.294
$0.294
ROLL PIN - PLAIN FINISH 5/32" X 1/2"
53212RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/32
- Length is 1/2 inch
$13.275
$0.2655
$0.2655
ROLL PIN - PLAIN FINISH 5/32" X 1"
5321RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/32
- Length is 1 inch
$12.36
$0.2472
$0.2472
ROLL PIN - PLAIN FINISH 5/32" X 2"
5322RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/32
- Length is 2 inches
$17.64
$0.3528
$0.3528
ROLL PIN - PLAIN FINISH 5/32" X 3/4"
53234RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/32
- Length is 3/4 inch
$12.75
$0.255
$0.255