Ram Products

HP203

Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
Steel, zinc plated.
Used in conjunction with clevis pins and also trailer receivers.
Wire diameter 0.093.
Length of 1-5/8 inches.

$10.28
$0.4112

+ -

HP206

Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
Steel, zinc plated.
Used in conjunction with clevis pins and also trailer receivers.
Wire diameter 0.177.
Length of 3-1/4 inches.

$33.7425
$1.3497

+ -

HP207

Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
Steel, zinc plated.
Used in conjunction with clevis pins and also trailer receivers.
Wire diameter 0.093.
Length of 2-5/16 inches.

$11.40
$0.456

+ -

56X2CP

Metal, extended prong type cotter pin.
Extended prong makes separating the tines easier.
Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
When used with castle or slotted nuts, it becomes a safety locking device.
Low carbon steel, zinc plated material
Diameter is 5/16 inch
Length is 2 inches

$26.9325
$1.0773

+ -

56X5CP

Metal, extended prong type cotter pin.
Extended prong makes separating the tines easier.
Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
When used with castle or slotted nuts, it becomes a safety locking device.
Low carbon steel, zinc plated material
Diameter is 5/16 inch
Length is 5 inches

$40.805
$1.6322

+ -

X14214RP

Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
Usage is limited only by your imagination and technological capabilities.
Spring pins require only a straight drilled hole and may be installed using automatic equipment.
Reusable.
Carbon steel, plain finish material
Diameter is 1/4
Length is 2-1/4 inches

$38.025
$1.521

+ -

X142CLP

$13.00
$1.30

+ -

X143RP

Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
Usage is limited only by your imagination and technological capabilities.
Spring pins require only a straight drilled hole and may be installed using automatic equipment.
Reusable.
Carbon steel, plain finish material
Diameter is 1/4
Length is 3 inchs

$37.49
$1.4996

+ -