Nuts
HEX NUT STAINLESS UNC #12-24
SSN1224
- A finished hex nut made from stainless steel.
- For use with grade stainless steel screws.
- Proof load: 100,000 psi.
- Corrosion resistant 18-8 stainless steel alloy.
- Size: #12-24.
$0.00
LOCK NUT NYLON UNC STAINLESS #8-32
LN832SS
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with stainless steel machine screws and bolts.
- Reusable.
- The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
- Made form 18-8 or equivalent stainless steel.
- Size: #8-32.
$0.00
HEX NUT METRIC ZINC M6-1.0 CL 10
XM6X1N10
- A hex nut with a metric thread pitch.
- Class 10.
- Intended for use with screws and bolts of property class 10.9 or lower.
- Widely used in farm equipment and automotive related industries.
- Made from low carbon steel.
- Size: M6-1.0.
$0.00
HEX NUT METRIC ZINC M10-1.25 CL 8
XM10X1.25N
- A hex nut with a metric thread pitch.
- Class 8.
- Intended for use with screws and bolts of property class 8.8 or lower.
- Widely used in the automotive and electronics industry.
- Made from low carbon steel.
- Size: M10-1.25.
$0.00
LOCK NUT NYLON UNC ZINC 1/2"-13 GR 8
X8LN1213
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used in structural application with Grade 8 cap screws or bolts.
- Applications include engines, turbines, hydraulic cylinders, railroads and aerospace.
- Nylon inserts nuts are not designed to be used at temperatures over 250° F.
- Made from heat treated steel.
- Proof load: 150,000 psi.
- Size: 1/2"-13.
- Yellow zinc plated.
$0.00
HEX NUT UNC ZINC 3/8"-16 GR 8
8N3816
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 3/8"-16.
- Yellow zinc plated.
$0.00
HEX NUT UNC ZINC 5/16"-18 GR 8
8N5618
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 5/16"-18.
- Yellow zinc plated.
$0.00
KEP NUT UNC ZINC #8-32
KN832
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: #8-32.
$0.00
KEP NUT UNC ZINC #6-32
KN632
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: #6-32.
$0.00
LOCK NUT NYLON UNC ZINC #6-32 GR 2
LN632
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: #6-32.
- Zinc plated.
$0.00
HEX FLANGE NUT ZINC 1/4"-20
XFN1420
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Grade A case hardened.
- Size: 1/4"-20.
$0.00
WING NUT UNC ZINC 5/16"-18
5618WN
- A nut with wings which allow the part to be manually turned.
- Used when a part is frequently assembled and disassembled at a place where torque greater than that achieved with finger pressure is not needed.
- Made from cold forged steel.
- Zinc plated.
- Size: 5/16"-18.
$0.00
HEX NUT UNF ZINC 1"-14 GR 8
8N114
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1"-14.
- Yellow zinc plated.
$0.00
HEX NUT UNC ZINC 1/2"-13 GR 8
8N1213
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1/2"-13.
- Yellow zinc plated.
$0.00
HEX NUT UNF ZINC 1/2"-20 GR 8
8N1220
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1/2"-20.
- Yellow zinc plated.
$0.00
HEX NUT UNC ZINC 1/4"-20 GR 8
8N1420
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1/4"-20.
- Yellow zinc plated.
$0.00
HEX NUT UNF ZINC 1/4"-28 GR 8
8N1428
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 1/4"-28.
- Yellow zinc plated.
$0.00
HEX NUT UNC ZINC 3/4"-10 GR 8
8N3410
- A finished hex nut made from low carbon steel.
- For use with grade 8 bolts.
- Proof load: 150,000 psi.
- Size: 3/4"-10.
- Yellow zinc plated.
$0.00
LOCK NUT STOVER UNF ZINC 1"-14 GRADE C
8SLN114
- Stover lock nuts, also called Grade C automation lock nuts.
- All metal, one-piece hex nut which derives it prevailing torque characteristics from controlled distortion of it top threads from their normal helical form to a more elliptical shape.
- Can withstand temperatures up to 450°s F.
- Can withstand severe vibration and shock loads.
- Frequently used in farm machinery, plus the automotive and related metalworking industries.
- Proof load 150,000 psi.
- Zinc plated.
- Size: 1"-14.
$0.00
LOCK NUT STOVER UNF ZINC 1/2"-20 GRADE C
8SLN1220
- Stover lock nuts, also called Grade C automation lock nuts.
- All metal, one-piece hex nut which derives it prevailing torque characteristics from controlled distortion of it top threads from their normal helical form to a more elliptical shape.
- Can withstand temperatures up to 450°s F.
- Can withstand severe vibration and shock loads.
- Frequently used in farm machinery, plus the automotive and related metalworking industries.
- Proof load 150,000 psi.
- Zinc plated.
- Size: 1/2"-20.
$0.00
LOCK NUT STOVER UNF ZINC 1/4"-28 GRADE C
8SLN1428
- Stover lock nuts, also called Grade C automation lock nuts.
- All metal, one-piece hex nut which derives it prevailing torque characteristics from controlled distortion of it top threads from their normal helical form to a more elliptical shape.
- Can withstand temperatures up to 450°s F.
- Can withstand severe vibration and shock loads.
- Frequently used in farm machinery, plus the automotive and related metalworking industries.
- Proof load 150,000 psi.
- Zinc plated.
- Size: 1/4"-28.
$0.00