Taps
HAND TAP - HIGH SPEED/PLUG 7/16"-14
X7614PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 7/16-14.
- Number of flutes: 4.
- Length of thread: 1-7/16".
- Overall length: 3-5/32".
HAND TAP - HIGH SPEED/PLUG 7/16"-20
X7620PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 7/16-20.
- Number of flutes: 4.
- Length of thread: 1-7/16".
- Overall length: 3-5/32".
HAND TAP - HIGH SPEED/TAPER 7/16"-20
X7620TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 7/16-20.
- Number of flutes: 4.
- Length of thread: 1-7/16".
- Overall length: 3-5/32".
HAND TAP - HIGH SPEED/TAPER 7/8"-9
X789TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 7/8-9.
- Number of flutes: 4.
- Length of thread: 2-7/32".
- Overall length: 4-11/16".
HAND TAP - HIGH SPEED/BOTTOM #8-32
X832BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 8-32.
- Number of flutes: 4.
- Length of thread: 3/4".
- Overall length: 2-1/8".
HAND TAP - HIGH SPEED/PLUG #8-32
X832PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 8-32.
- Number of flutes: 4.
- Length of thread: 3/4".
- Overall length: 2-1/8".
HAND TAP - HIGH SPEED/TAPER #8-32
X832TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 8-32.
- Number of flutes: 4.
- Length of thread: 3/4".
- Overall length: 2-1/8".
HAND TAP - HIGH SPEED/BOTTOM 7/16"-12
X9612BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 9/16-12.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
HAND TAP - HIGH SPEED/TAPER 9/16"-12
X9612TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 9/16-12.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
HAND TAP - HIGH SPEED/BOTTOM 9/16"-18
X9618BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 9/16-18.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
HAND TAP - HIGH SPEED/TAPER 9/16"-18
X9618TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 9/16-18.
- Number of flutes: 4.
- Length of thread: 1-21/32".
- Overall length: 3-19/32".
DRILL/TAP 10-32 HEX DRIVE
XDT1032
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 5/8".
- Overall length: 2.61".
DRILL/TAP 1/4-20 HEX DRIVE
XDT1420
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 3/4".
- Overall length: 2.89".
TAP BOTTOMING M10-1.50
XM10X1.5BTAP
- Bottom tap
- High speed steel
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Threads close to the bottom of blind holes.
- Size: M10-1.50
TAP TAPER M10-1.50
XM10X1.5TTAP
- Taper tap
- High speed steel
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Size: M10-1.50
TAP TAPER M8-1.25
XM8X1.25TTAP
- Taper tap
- High speed steel
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Size: M8-1.25
HAND TAP - HIGH SPEED/TAPER 1"-8
X18TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 1-8.
- Number of flutes: 4.
- Length of thread: 2-1/2".
- Overall length: 5-1/8".
HAND TAP - HIGH SPEED/TAPER 3/4"-10
X3410TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 3/4-10.
- Number of flutes: 4.
- Length of thread: 2".
- Overall length: 4-1/4".
HAND TAP - HIGH SPEED/TAPER 3/4"-16
X3416TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 3/4-16.
- Number of flutes: 4.
- Length of thread: 2".
- Overall length: 4-1/4".
HAND TAP - HIGH SPEED/PLUG #4-40
X440PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 4-40.
- Number of flutes: 3.
- Length of thread: 9/16".
- Overall length: 1-7/8".
HAND TAP - HIGH SPEED/BOTTOM 7/8"-9
X789BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 7/8-9.
- Number of flutes: 4.
- Length of thread: 2-7/32".
- Overall length: 4-11/16".
Refine
16 More
8 More
21 More