Taps
HAND TAP - HIGH SPEED/TAPER 1/4"-28
X1428TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 1/4-28.
- Number of flutes: 4.
- Length of thread: 1".
- Overall length: 2-1/2".
$0.00
TAP-HIGH SPEED, PIPE-TAPER 1/4" NPT
X14MPTTAP
- Taper pipe tap
- Made from high quality high speed steel.
- For the tapping of pipe and pipe fittings.
- Designed to produce threads where mated parts are not required to withstand high fluid or gas pressures.
- Use where the use of a sealing compound or tape is acceptable to produce a leakproof thread.
- Chamfer length: 1-2 pitches.
- Size: 1/4-18 NPT.
- Number of flutes: 4.
- Length of thread: 1-1/6".
- Overall length: 2-7/16".
$0.00
TAP-HIGH SPEED, PIPE-TAPER 1/8" NPT
X18MPTTAP
- Taper pipe tap
- Made from high quality high speed steel.
- For the tapping of pipe and pipe fittings.
- Designed to produce threads where mated parts are not required to withstand high fluid or gas pressures.
- Use where the use of a sealing compound or tape is acceptable to produce a leakproof thread.
- Chamfer length: 1-2 pitches.
- Size: 1/8-27 NPT.
- Number of flutes: 4.
- Length of thread: 3/4".
- Overall length: 2-1/8".
$0.00
DRILL/TAP 10-32 HEX DRIVE
XDT1032
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 5/8".
- Overall length: 2.61".
$0.00
DRILL/TAP 1/4-20 HEX DRIVE
XDT1420
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 3/4".
- Overall length: 2.89".
$0.00
DRILL/TAP 8-32 HEX DRIVE
XDT832
- Combination drill and tap.
- Made from high quality high speed steel.
- Hex shank makes it ideally suited to cordless drills.
- Create the hole and tap in a single operation with no center drilling or punching required.
- A 135° split point permits hole and thread to be cut at high speeds.
- Ideal for electrical, maitenance, industrial and automotive industries.
- Ideal for aluminum, steel, stainless steel, bronze, brass, cast iron and zinc materials.
- 1/4" hex shank.
- Length of thread: 1/2".
- Overall length: 2.45".
$0.00
TAP TAPER M8-1.25
XM8X1.25TTAP
- Taper tap
- High speed steel
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Size: M8-1.25
$0.00
HAND TAP - HIGH SPEED/BOTTOM 5/16"-18
X5618BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 5/16-18.
- Number of flutes: 4.
- Length of thread: 1-1/8".
- Overall length: 2-23/32".
$0.00
HAND TAP - HIGH SPEED/PLUG 5/16"-18
X5618PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 5/16-18.
- Number of flutes: 4.
- Length of thread: 1-1/8".
- Overall length: 2-23/32".
$0.00
HAND TAP - HIGH SPEED/TAPER 5/16"-18
X5618TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 5/16-18.
- Number of flutes: 4.
- Length of thread: 1-1/8".
- Overall length: 2-23/32".
$0.00
HAND TAP - HIGH SPEED/BOTTOM 5/16"-24
X5624BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 5/16-24.
- Number of flutes: 4.
- Length of thread: 1-1/8".
- Overall length: 2-23/32".
$0.00
HAND TAP - HIGH SPEED/PLUG 5/16"-24
X5624PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 5/16-24.
- Number of flutes: 4.
- Length of thread: 1-1/8".
- Overall length: 2-23/32".
$0.00
HAND TAP - HIGH SPEED/TAPER 5/16"-24
X5624TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 5/16-24.
- Number of flutes: 4.
- Length of thread: 1-1/8".
- Overall length: 2-23/32".
$0.00
HAND TAP - HIGH SPEED/PLUG 5/8"-11
X5811PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 5/8-11.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$0.00
HAND TAP - HIGH SPEED/TAPER 5/8"-11
X5811TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 5/8-11.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$0.00
HAND TAP - HIGH SPEED/BOTTOM 5/8"-18
X5818BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 5/8-18.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$0.00
HAND TAP - HIGH SPEED/PLUG 5/8"-18
X5818PTAP
- High speed plug hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- The most common chamfer for use by hand or machine in through or blind holes.
- Chamfer length: 3-5 threads.
- Size: 5/8-18.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$0.00
HAND TAP - HIGH SPEED/TAPER 5/8"-18
X5818TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 5/8-18.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$0.00
HAND TAP - HIGH SPEED/BOTTOM 5/8"-11
X5811BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 5/8-11.
- Number of flutes: 4.
- Length of thread: 1-13/16".
- Overall length: 3-13/16".
$0.00
HAND TAP - HIGH SPEED/BOTTOM #6-32
X632BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 6-32.
- Number of flutes: 3.
- Length of thread: 11/16".
- Overall length: 2".
$0.00
HAND TAP - HIGH SPEED/TAPER #6-32
X632TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 6-32.
- Number of flutes: 3.
- Length of thread: 11/16".
- Overall length: 2".
$0.00
HAND TAP - HIGH SPEED/BOTTOM 7/16"-20
X7620BTAP
- High speed bottom hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Threads close to the bottom of blind holes.
- Chamfer length: 1-2 threads.
- Size: 7/16-20.
- Number of flutes: 4.
- Length of thread: 1-7/16".
- Overall length: 3-5/32"..
$0.00
HAND TAP - HIGH SPEED/TAPER 7/16"-14
X7614TAP
- High speed taper hand tap.
- Made from high quality high speed steel.
- Can be used in tap wrenches or production tapping heads for general purpose tapping.
- Standard "H" limits.
- Used for starting a threaded through hole and offer long tap life in abrasive materials.
- Chamfer length: 7-10 threads.
- Size: 7/16-14.
- Number of flutes: 4.
- Length of thread: 1-7/16".
- Overall length: 3-5/32".
$0.00
Refine
21 More
16 More
8 More