Screws
SHEET METAL SCREW PHIL PAN HD #14 X 1-1/4"
14X114P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 14
- Length: 1-1/4"
SHEET METAL SCREW PHIL PAN HD #14 X 1" STAINLESS
14X1PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 14
- Screw length 1 inch
WOOD SCREW PHILLIPS FLAT HEAD #14 X 2"
14X2FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 14
- Length: 2"
MACHINE SCREW PHIL OVAL HD #6-32 X 1/2" STAINLESS
632X12OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 6-32 diameter.
- Length of 1/2".
MACHINE SCREW PHIL OVAL HD #6-32 X 1" STAINLESS
632X1OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 6-32 diameter.
- Length of 1".
TEK SCREW QUAD DR PAN HD #8 X 1 1/2" TAN HEAD
8X112RHT11
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
TEK SCREW QUAD DR PAN HD #8 X 1" TAN HEAD
8X1RHT11
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
SHEET METAL SCREW PHIL PAN HD #8 X 2-1/2"
8X212P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 2-1/2"
TEK SCREW QUAD DR PAN HD #8 X 3/4" TAN HEAD
8X34RHT11
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
SHEET METAL SCREW OVAL PHIL HD #8 X 3/8" STAINLESS
8X38OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 3/8 inch
MACHINE SCREW TORX PAN HD #10-24 X 1-1/2" STAINLESS
X1024X112PTXSS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
MACHINE SCREW TORX PAN HD #10-24 X 3/4" STAINLESS
X1024X34PTXSS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
MACHINE SCREW PHIL TRUSS HD #10-32 X 3/4" STAINLESS
X1032X34THPS
- Machine Screw
- Phillips Drive
- Truss Head
- 18-8 Stainless Steel
- #10-32 X 3/4"
TEK SCREW HEX WASHER HD #10 X 1-1/4", STAINLESS
X10X114TS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Stainless Steel
- Rockwell hardness C55 minimum.
- Diameter: 10
- Length: 1-1/4"
TEK SCREW HEX WASHER HD #10 X 1-1/2" STAINLESS
X10X112TS
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Stainless Steel
- Rockwell hardness C55 minimum
TEK SCREW PHILLIPS PAN HEAD #10 X 1/2", STAINLESS
X10X12PTS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Stainless Steel
SHEET METAL SCREW PHIL FLAT HD #10 X 1" STAINLESS
X10X1FHPS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Flat head, phillips drive
Refine
2 More
6 More