Screws
MACHINE SCREW PHIL FLAT HD #10-24 X 1/2" STAINLESS
X1024X12FHPS
- Machine Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- #10-24 X 1/2"
$19.05
$0.1905
$0.1905
TEK SCREW PHILLIPS PAN HEAD #8 X 3/8"
X8X38PT
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel zinc plated
$12.60
$0.126
$0.126
DRYWALL SCREW - FINE #8 X 3"
X8X3DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 8
- Length 3 inches
- Bugle head, phillips drive
$24.00
$0.24
$0.24
SHEET METAL SCREW SQ DR FLAT HD #8 X 3"
X8X3FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 3 inches
$31.80
$0.318
$0.318
TEK SCREW PHILLIPS PAN HEAD #10 X 3/4"
10X34PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 3/4"
$19.80
$0.198
$0.198
TEK SCREW PHILLIPS PAN HEAD #12 X 1"
X12X1PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
$72.00
$0.72
$0.72
METRIC MACH. SCREW PHILLIPS PAN HD M3-0.50 X 10
XM3X10P
- A metric machine screw is a straight shank fastener with a metric thread pitch designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Metric screws are the type almost exclusively used in items manufactured in Europe.
- M3-.50 diameter.
- Length is 10 mm.
- Zinc plated.
- Normally class 4.8.
- Made from carbon steel.
- Pan head Phillips.
$18.30
$0.183
$0.183
METRIC MACH. SCREW PHILLIPS PAN HD M3-0.50 X 6
XM3X6P
- A metric machine screw is a straight shank fastener with a metric thread pitch designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Metric screws are the type almost exclusively used in items manufactured in Europe.
- M3-.50 diameter.
- Length is 6 mm.
- Zinc plated.
- Normally class 4.8.
- Made from carbon steel.
- Pan head Phillips.
$17.20
$0.172
$0.172
MACHINE SCREW PHILLIPS PAN HD M3-0.50 X 8
XM3X8P
- A metric machine screw is a straight shank fastener with a metric thread pitch designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Metric screws are the type almost exclusively used in items manufactured in Europe.
- M3-.50 diameter.
- Length is 8 mm.
- Zinc plated.
- Normally class 4.8.
- Made from carbon steel.
- Pan head Phillips.
$19.00
$0.19
$0.19
METRIC MACH. SCREW PHILLIPS PAN HD M4-0.70 X 10
XM4X10P
- A metric machine screw is a straight shank fastener with a metric thread pitch designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Metric screws are the type almost exclusively used in items manufactured in Europe.
- M4-.70 diameter.
- Length is 10 mm.
- Zinc plated.
- Normally class 4.8.
- Made from carbon steel.
- Pan head Phillips.
$20.40
$0.204
$0.204
METRIC MACH. SCREW PHILLIPS PAN HD M4-0.70 X 12
XM4X12P
- A metric machine screw is a straight shank fastener with a metric thread pitch designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Metric screws are the type almost exclusively used in items manufactured in Europe.
- M4-.70 diameter.
- Length is 12 mm.
- Zinc plated.
- Normally class 4.8.
- Made from carbon steel.
- Pan head Phillips.
$15.75
$0.1575
$0.1575
METRIC MACH. SCREW PHILLIPS PAN HD M4-0.70 X 16
XM4X16P
- A metric machine screw is a straight shank fastener with a metric thread pitch designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Metric screws are the type almost exclusively used in items manufactured in Europe.
- M4-.70 diameter.
- Length is 16 mm.
- Zinc plated.
- Normally class 4.8.
- Made from carbon steel.
- Pan head Phillips.
$15.00
$0.15
$0.15
Refine
2 More
6 More