Screws
SHEET METAL SCREW PHIL PAN HD #12 X 1-1/4"
12X114P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 12
- Length: 1-1/4"
$24.72
$0.2472
$0.2472
SHEET METAL SCREW OVAL PHIL HD #12 X 1-1/4" STAINLESS
12X114OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 12
- Screw length 1-1/4 inches
$33.55
$0.3355
$0.3355
SHEET METAL SCREW HEX WASH HD #12 X 1/2"
12X12H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 12
- Screw length 1/2 inch
$24.60
$0.246
$0.246
SHEET METAL SCREW PHIL PAN HD #12 X 1/2"
12X12P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 12
- Length: 1/2"
$26.76
$0.2676
$0.2676
WOOD SCREW PHILLIPS FLAT HEAD #12 X 1"
12X1FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 12
- Length: 1"
$25.20
$0.252
$0.252
SHEET METAL SCREW HEX WASH HD #12 X 1"
12X1H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 12
- Screw length 1 inch
$28.20
$0.282
$0.282
SHEET METAL SCREW HEX WASH HD #12 X 2"
12X2H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 12
- Screw length 2 inches
$35.42
$0.3542
$0.3542
SHEET METAL SCREW PHIL PAN HD #12 X 2" STAINLESS
12X2PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 12
- Screw length 2 inches
$50.56
$0.5056
$0.5056
SHEET METAL SCREW PHIL PAN HD #12 X 2"
12X2P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 12
- Length: 2"
$40.59
$0.4059
$0.4059
TEK SCREW HEX WASHER HD #12 X 2"
12X2T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 12
- Length: 2"
$33.48
$0.3348
$0.3348
METAL SCREW PHILLIPS FLAT HEAD #10 X 1-1/4"
X10X114FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1-1/4 inches
$21.75
$0.2175
$0.2175
SHEET METAL SCREW SQ DR PAN HD #10 X 1-1/4"
X10X114RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 1-1/4"
$32.28
$0.3228
$0.3228
TEK SCREW SQUARE DRIVE PAN HD #10 X 1-1/4"
X10X114RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1-1/4"
$56.96
$0.5696
$0.5696
TEK SCREW SQUARE DRIVE PAN HD #10 X 1/2"
X10X12RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1/2"
$29.16
$0.2916
$0.2916
METAL SCREW PHILLIPS FLAT HEAD #10 X 1"
X10X1FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1 inch
$15.75
$0.1575
$0.1575
SHEET METAL SCREW PHIL FLAT HD #10 X 1" STAINLESS
X10X1FHPS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Flat head, phillips drive
$39.82
$0.3982
$0.3982
TEK SCREW FLAT HEAD PHILLIPS #10 X 1"
X10X1FHPT
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Flat head phillips head
- Steel zinc plated
$77.28
$0.7728
$0.7728
METAL SCREW SQ DRIVE FLAT HEAD #10 X 1"
X10X1FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1 inch
$30.00
$0.30
$0.30
METAL SCREW PHILLIPS FLAT HEAD #10 X 2"
X10X2FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 2 inches
$27.00
$0.27
$0.27
Refine
2 More
6 More