Nuts
WELL NUT 1/4"-20
XACD1420
- A well nut is a type of fastener used to blindly fasten a piece (much like an molly bolt) and to seal the bolt hole.
- It consists of a flanged neoprene bushing with a nut embedded in the non-flanged end.
- The bolt is passed through one of the pieces to be fastened and threaded on to the nut from the flanged end.
- The non-flanged end is then inserted through the other piece to be fastened.
- As the bolt is tightened, friction from the neoprene flange against the piece being fastened prevents the nut from turning.
- The bushing is compressed by the nut, forming a lip behind the piece being fastened, which compresses the fastened piece and seals the bolt hole.
- Well nuts are not particularly strong, but are useful for sealing holes and/or isolating vibrations.
- 1/4"-20 threads.
$0.00
CASTLE NUT ZINC 1/2"-20
XCN1220
- Slotted Steel Castle Nut
- Grade 2, Zinc plated finish
- 1/2" - 20 Fine thread size
- ASTM 563 quality standards
$0.00
HEX FLANGE NUT LARGE FLANGE ZINC 1/4"-20
XLFN1420
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Low carbon steel.
$0.00
BRASS LOCK NUT NYLON UNC 1/2"-13
XLN1213BR
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
$0.00
BRASS LOCK NUT NYLON UNF 1/2"-20
XLN1220BR
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
$0.00
LOCK NUT NYLON UNC ZINC 1"-8 GR 2
XLN18
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- The nylon collar will begin to deteriorate at temperature from 150° to 350° F.
- Proof load: 90,000 psi. minimum.
- Size: 1"-8.
- Zinc plated.
$0.00
BRASS LOCK NUT NYLON UNC 3/8"-16
XLN3816BR
- Hexagonal shape Nylon Lock Nut
- Nylon material creates pressure against the fastener
- Forces the bottom threads of the fastener against the top threads of the bolt
- Creates a better hold
- Locks the nut into place so it will not vibrate loose
- Corrosion Resistant Brass
$0.00
BRASS LOCK NUT NYLON UNC 5/16"-18
XLN5618BR
- Hexagonal shape Nylon Lock Nut
- Nylon material creates pressure against the fastener
- Forces the bottom threads of the fastener against the top threads of the bolt
- Creates a better hold
- Locks the nut into place so it will not vibrate loose
- Corrosion Resistant Brass
$0.00
LOCK NUT, NYLON, STAINLESS, 8-32, BLACK
XLN832SS2
- Hexagonal shape Nylon Lock Nut
- Nylon material creates pressure against the fastener
- Forces the bottom threads of the fastener against the top threads of the bolt
- Creates a better hold
- Locks the nut into place so it will not vibrate loose
- Black
$0.00
HEX NUT METRIC ZINC M10-1.25 CL 8
XM10X1.25N
- A hex nut with a metric thread pitch.
- Class 8.
- Intended for use with screws and bolts of property class 8.8 or lower.
- Widely used in the automotive and electronics industry.
- Made from low carbon steel.
- Size: M10-1.25.
$0.00
HEX NUT METRIC ZINC M12-1.50 CL 8
XM12X1.5N
- A hex nut with a metric thread pitch.
- Class 8.
- Intended for use with screws and bolts of property class 8.8 or lower.
- Widely used in the automotive and electronics industry.
- Made from low carbon steel.
- Size: M12-1.50.
$0.00
HEX NUT METRIC ZINC M14-2.0 CL 10
XM14X2.0N10
- A hex nut with a metric thread pitch.
- Class 10.
- Intended for use with screws and bolts of property class 10.9 or lower.
- Widely used in farm equipment and automotive related industries.
- Made from low carbon steel.
- Size: M14-2.0.
$0.00