Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
RIVET LARGE FLANGE ALUM/STEEL 3/16 DIAM GRIP .251-.375
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .251-.375
- Head style: Large flange
RIVET BUTTON HEAD ALUM/STEEL 3/16 DIAM GRIP .376-.500
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 3/16
- Grip range .376-.500
- Head style: Button head
RIVET LARGE FLANGE ALUM/STEEL 3/16 DIAM GRIP .376-.500
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .376-.500
- Head style: Large flange
THREADED ROD UNF ZINC 1"-14, GRADE A, 3 FOOT LENGTH
- Commonly referred to as fully threaded rod.
- Used for general purpose fastening for anything from an anchor bolt to a through bolt.
- Low carbon Grade A steel.
- Zinc plated.
- Tensile Strength: 60,000 PSI minimum.
- Diameter: 1"-14.
- 3 foot rod, fully threaded.
E-CLIP, RETAINING 1/8" SHAFT
- Stamped clips for deep grooves with three prongs that yield high thrust load capacity.
- Designed for radial installation into machined grooves on shafts of varying diameter.
- E clips require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 1/8".
LOCK WASHER INTERNAL STAINLESS #10 INTERNAL TOOTHED
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from stainless steel.
- Inside Diameter: Min .221 Max .231
- Outside Diameter: Min .394 Max .410
HEX JAM NUT STAINLESS 1/2"-20
- A hex nut which is only 2/3 the thickness of a full form nut.
- Jam nuts are tightened against the work surface and a finished or heavy hex nut is tightened against the jam nut to keep it from loosening.
- Made from stainless steel.
- Size: 1/2-20".
KEP NUT UNF STAINLESS #10-32
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
- Size: #10-32.
BRASS LOCK NUT NYLON UNC 1/4"-20
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Designed to be used with like-material machine screws and bolts.
- Reusable.
