Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
MACHINE SCREW PHIL FLAT HD 1/4"-20 X 2-3/4" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
MACHINE SCREW HEX HEAD TYP-F 1/4"-20 X 2" THREAD CUTTING
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 1/4-20 diameter.
- Length of 2".
MACHINE SCREW PHIL FLAT HD 1/4"-20 X 3" STAINLESS
- FLAT HEAD
- PHILLIPS DRIVE
- 1/4" DIAMETER
- COARSE THREAD
- LENGTH 3"
MACHINE SCREW PHIL PAN HD 1/4"-20 X 3" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Pan head Phillips.
- 1/4-20 diameter.
- Length of 3".
MACHINE SCREW FLAT HEAD PHILLIPS 1/4"-20 X 3/4" BLACK ZINC
- FLAT HEAD
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Flat head Phillips.
SWAGING SLEEVE 3/32
- Aluminum swag sleeves.
- Swaging sleeves make a 'loop' in cable.
- Place the cable through both sides of the sleeve and use a swaging tool to crimp sleeve into cable.
- Sleeves, when properly applied, are capable of holding the rated breaking strength of the cable to which they are applied.
- For use with 3/32" uncoated wire rope.
FLAT HEAD SOCKET CAPSCREW UNC PLAIN 3/4"-10 X 3-1/2"
- Made from alloy steel.
- Similar in design to socket head cap screws, but with a countersunk flat head.
- Used when a flush mounting, where a high strength screw is required.
- Plain black finish.
- Diameter: 3/4-10"
- Length: 3-1/2"
FENDER WASHER ZINC 3/16" X 1-1/4"
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 3/16"
HEX CAP SCREW UNC STAINLESS 3/8"-16 X 1/2"
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 3/8"-16.
- Length: 1/2".
MACHINE SCREW PHIL TRUSS HD 3/8"-16 X 1-1/2" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 3/8"-16 X 1-1/2" GR8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter:3/8"-16.
- Length: 1-1/2".
HEX CAP SCREW BOLT UNC FULLY THREADED ZINC 3/8"-16 X 1-1/2" GR 2
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 74,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNC.
CARRIAGE BOLT UNC ZINC 3/8"-16 X 2-1/2" GR A
- Made from low or medium carbon steel.
- Round head bolt with a square neck under the head.
- The square neck is designed to keep the bolt from turning as the nut is tightened.
- Zinc plated.
- Tensile strength: 60,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 3/8"-16.
- Length: 2-1/2".