Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
HEX FLANGE NUT METRIC ZINC M12-1.75 SERRATED
- A flange nut has a wide flange at one end that acts as an integrated washer.
- The flange serves to distribute the pressure of the nut over the part being secured.
- Less likely to loosen as a result of an uneven fastening surface.
- Serrated.
- Size: M12-1.75.
- Class 10.9
FLAT WASHER USS 5/8" STAINLESS
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Used where parts are subject to corrosion.
- Made from 18-8 stainless steel.
- Outside Diameter: 1-1/2"
HELICALLY COILED INSERT KIT UNF 5/16"-24
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:5/16"-24
- Drill size: 21/64
HELICALLY COILED INSERT KIT UNF 7/16"-20
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:7/16"-20
- Drill size: 29/64
HELICALLY COILED INSERT KIT M10 X 1.25
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M10 X 1.25
- Drill size: 13/32
HELICALLY COILED INSERT KIT M5 X 0.80
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M5 X 0.8
- Drill size: 13/64
HELICALLY COILED INSERT KIT M8 X 1.25
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M8 X 1.25
- Drill size: 21/64
HELICALLY COILED INSERT KIT M10 X 1.50
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M10 X 1.50
- Drill size: 13/32
HELICALLY COILED INSERT KIT M6 X 1.00
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M6 X 1.00
- Drill size: 1/4
LOCK WASHER SPLIT STAINLESS 1/4"
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Stainless Steel.
- Resists loosening caused by vibration and corrosion.
- For use with stainless nuts and screws of a similar stainless alloy.
- Rockwell Hardness: C35-43
- Inside Diameter: Min .252 Max .260
- Outside Diameter: 0.487
HEX NUT METRIC ZINC M12-1.75 CL 8
- A hex nut with a metric thread pitch.
- Class 8.
- Intended for use with screws and bolts of property class 8.8 or lower.
- Widely used in the automotive and electronics industry.
- Made from low carbon steel.
- Size: M12-1.75.
HEX CAP SCREW BOLT METRIC ZINC M8-1.25 X 20, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M8-1.25.
- Length: 20 mm.
SHEET METAL SCREW PHIL PAN HD #8 X 2-1/2"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 2-1/2"
SHEET METAL SCREW OVAL PHIL HD #8 X 2" STAINLESS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 2 inches
RIVET BUTTON HEAD ALUM/ALUM 1/8 DIAM GRIP .188-.250
- Aluminum rivet and aluminum mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 1/8
- Grip range .188-.250
- Head style: Button head