Switches
CARLING CONTURA SWITCH BODY (ON)-OFF-(ON) UNLIT
XVDD1S00B
- Rocker Switch
- Double Pole Double Throw
- 20 amp
- 12VDC
- Easy installation: actuators snap onto switch body
- 6 Contacts
$0.00
CARLING MOUNTING PANEL END
XVME-01
- Mounting Bracket end
- Dimensions: 1.19" W x 2.30" H
- End unit reverses to fit either side of the middle unit
- For use with the Contura Rocker Switches
$0.00
CARLING SINGLE MOUNTING PANEL
XVMM-01
- Mounting Bracket Center
- Dimensions: 1.34" W x 2.03" H
- Mounting hole: 1.03" W x 1.97" H
- For use with the Contura Rocker Switches
- Used where multiple switches can be installed with only one hold to cut in your panel
- Black
$0.00
CARLING CONTURA II SWITCH ACTUATOR BLACK SOFT RED LENS
XVVARB00-000
- Aesthetic design of raised "bumps" on the top and bottom of the rocker
- Fits the Contura switch bodies
- Easy installation: actuators snap onto switch body
- Constructed of thermoplastic polycarbonate
$0.00
TOGGLE SWITCH - ON/OFF 2 SCREWS, SPST
TS571
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-Off
- Single pole, single throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Two screw terminals.
$0.00
TOGGLE SWITCH - ON/OFF 2 BLADES, SPST
TS571Q
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-Off
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Two 1/4" blade terminals.
$0.00
TOGGLE SWITCH - ON/OFF/ON 3 SCREWS, SPDT
TS573
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-Off-On
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Three screw terminals.
$0.00
TOGGLE SWITCH - ON/ON 3 SCREWS, SPDT
TS572
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-On
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Three screw terminals.
$0.00
TOGGLE SWITCH SAFETY COVER RED - ON/OFF SWTICHES
TSC1
- Standard handle, toggle switch safety cover.
- Prevents accidental actuation.
- Spring loaded design with a steel faceplate and plastic cover.
- For use with on-off toggle switches.
- Red in color.
$0.00
TOGGLE SWITCH - ON/OFF 4 SCREWS, DPST
TS574
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-Off
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Four screw terminals.
$0.00
TOGGLE SWITCH BOOT - SILICONE 15/32 THREADS SHORT HANDLE
TSB
- Short handle, toggle switch boot.
- 15/32 threads.
- Tough rubber silicone covers are UV-resistant.
- Protect switches from moisture, dust and dirt.
- Screws onto most toggle switches.
- Rated at -40°F to 356°F.
$0.00
TOGGLE SWITCH - ON/OFF/ON 6 SCREWS DPDT
TS577
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-Off-On
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Six screw terminals.
$0.00
TOGGLE SWITCH - ON/ON 6 BLADES, DPDT
TS576Q
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-On
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Six 1/4" blade terminals.
$0.00
TOGGLE SWITCH - ON/ON 6 SCREWS, DPDT
TS576
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-On
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Six screw terminals.
$0.00
TOGGLE SWITCH-M(ON)-OFF-M(ON) 3 SCREWS SPDT
TS575
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: MOMENTARY ON-OFF-MOMENTARY ON
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Three screw terminals.
$0.00
TOGGLE SWITCH - ON/OFF 4 BLADES, DPST
TS574Q
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: Momentary On-Off-Momentary On
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Four 1/4" blade terminals.
$0.00
SINGLE POLE BATTERY SWITCH 6-36 VOLTS DC, 175 AMPS CONTINUOUS, SILVER CONTACTS
XCH2484
- Battery master disconnect switch.
- Two positions: Off-On
- For 6-36 volt DC systems.
- Will disconnect the battery circuit only.
- Electrical rating of 1000 Amps intermittent, 175 amps continuous.
- Copper contacts.
$0.00
TOGGLE SWITCH, ON/OFF, SPST, 2 SCREWS
XCH5520
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- Standard bat handle.
- Mounting stem is 15/32" threads.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-Off 2 screw terminals, o ring seal
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Two screw terminals.
$0.00
TOGGLE SWITCH, ON/OFF, SPST, 2 SCREWS
XCH5582
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- Standard bat handle.
- Mounting stem is 15/32" threads.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-Off 2 screw terminals.
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Two screw te\rminals.
$0.00
TOGGLE SWITCH, ON/OFF, SPST, 2 WIRES, PVC COATED
XCH5582-10
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- Standard bat handle.
- Mounting stem is 11/32" threads.
- O ring seal.
- Circuitry: On-Off.
- Single pole, double throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Two 8" wire leads.
- Switch is PVC coated.
$0.00
PUSH-PULL SWITCH, OFF/ON, TWO 12" WIRES, 6-36 VOLTS DC
XCHM-606
- Brass housing, plasticized.
- Two insulated copper wire leads, 12" long.
- Chrome-plated brass knob.
- 10-32 thread.
$0.00
TOGGLE SWITCH ON-OFF-ON LIGHTED PADDLE 15A
XCLT-1561-111-012
- Clear nylon lighted
- SPDT
- On-off-on
- Five, 1/4" blade terminals
- Amp rating: 10 amps @ 250VAC, 15 amps @ 125VAC
$0.00