Screws
DRYWALL SCREW-FINE #6 X 1"
6X1DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 6
- Length 1 inch
- Bugle head, phillips drive
$0.00
MACHINE SCREW PHIL PAN HD #10-24 X 1-1/2" STAINLESS
X1024X112PSS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Pan head Phillips.
- 10-24 diameter.
- Length of 1-1/2".
$0.00
MACHINE SCREW PHILLIPS PAN HD #8-32 X 1" BLACK
X832X1P2
- PAN HEAD
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
$0.00
SHEET METAL SCREW PHIL PAN HD #10 X 1" STAINLESS
10X1PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 10
- Screw length 1 inch
$0.00
TEK SCREW PHILLIPS PAN HEAD #10 X 1"
10X1PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1"
$0.00
TEK SCREW PHILLIPS PAN HEAD #10 X 1" , BLACK
10X1PT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Phillips pan head.
- Steel zinc black.
- Diameter: 10
- Length: 1"
$0.00
SHEET METAL SCREW QUAD DR PAN HD #10 X 1" BLACK
10X1RH2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$0.00
SHEET METAL SCREW QUAD DR PAN HD #10 X 1" TAN HEAD
10X1RH11
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$0.00
SHEET METAL SCREW QUAD DR PAN HD #10 X 1" WHITE
10X1RH3
- A thread forming tapping screw with spaced threads and a gimlet point.
- Can be substituted in most applications for round, truss or binding screws.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a round top surface, cylindrical sides and a flat bearing surface.
- Zinc plated steel, with heads painted white.
- Great for RV applications.
- Square drive
- Screw diameter 10
- Screw length is 1 inch
$0.00
TEK SCREW HEX WASHER HD #10 X 1"
10X1T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1"
$0.00
WOOD SCREW PHILLIPS FLAT HEAD #10 X 2-1/2"
10X212FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 10
- Length: 2-1/2"
$0.00
SHEET METAL SCREW OVAL PHIL HD #10 X 2-1/2" STAINLESS
10X212OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 10
- Screw length 2-1/2 inches
$0.00
TEK SCREW QUAD DR PAN HD #10 X 1" TAN HEAD
10X1RHT11
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
$0.00
TEK SCRW QUAD-DRIVE PAN HD #10 X 1" WHITE
10X1RHT3
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Round washer head, phillips drive
- Zinc plated steel with white painted heads
$0.00
SHEET METAL SCREW PHIL PAN HD #10 X 2-1/2"
10X212P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 2-1/2"
$0.00
SHEET METAL SCRW SQUARE-DRIVE PAN HD #10 X 3/4" BLACK
10X34RH2
- Tek Screw
- Square Drive
- Pan Head
- Type A
- Black
- #10 X 3/4"
$0.00
SHEET METAL SCREW HEX WASH HD #10 X 3/8"
10X38H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 10
- Screw length 3/8 inch
$0.00