Screws
TEK SCREW PHILLIPS PAN HEAD #10 X 3/4"
10X34PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 3/4"
$19.80
$0.198
$0.198
MACHINE SCREW PHILLIPS PAN HD #6-32 X 1"
632X1
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 6-32 diameter.
- Length of 1".
$17.20
$0.172
$0.172
MACHINE SCREW PHILLIPS PAN HD #6-32 X 1/2"
632X12
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 6-32 diameter.
- Length of 1/2".
$11.80
$0.118
$0.118
METAL SCREW PHILLIPS FLAT HEAD #6 X 1-1/4"
X6X114FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 6
- Screw length 1-1/4 inches
$14.00
$0.14
$0.14
METAL SCREW PHILLIPS FLAT HEAD #6 X 1/2"
X6X12FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 6
- Screw length 1/2 inch
$8.00
$0.08
$0.08
METAL SCREW FLAT HEAD SQUARE DRIVE #6 X 1/2"
X6X12FHSD
- FLAT HEAD
- SQUARE DRIVE
- #6 DIAMETER
- LENGTH 1/2"
- ZINC FINISH
$19.80
$0.198
$0.198
SHEET METAL SCREW PHIL FLAT HD #6 X 1/2" STAINLESS
X6X12FHPS
- Machine Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- #10-24 X 1/2"
$18.75
$0.1875
$0.1875
METAL SCREW PHILLIPS FLAT HEAD #6 X 1"
X6X1FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 6
- Screw length 1 inch
$12.60
$0.126
$0.126
METAL SCREW PHILLIPS FLAT HEAD #6 X 3/4"
X6X34FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 6
- Screw length 3/4 inch
$10.00
$0.10
$0.10
Refine
2 More
6 More