Screws
TEK SCREW HEX WASHER HD #10 X 3/4", STAINLESS
X10X34TS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Grade 410 Stainless
SHEET METAL SCREW SQ DR PAN HD #10 X 3"
X10X3RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 3"
DRYWALL SCREW - FINE #10 X 4"
X10X4DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 10
- Length 4 inches
- Bugle head, phillips drive
METAL SCREW PHILLIPS FLAT HEAD #12 X 1-1/2"
X12X112FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 12
- Screw length 1-1/2 inches
HEX LAG SCREW ZINC 1/2" X 1-1/2"
X12X112LS
- A full-bodied bolt with a hex head, spaced threads and a gimlet point.
- For use in wood in non-corosive environments.
- Tensile strength 60,000 psi minimum
TEK SCREW PHILLIPS PAN HEAD #12 X 1-1/2"
X12X112PT
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel zinc plated
TEK SCREW HEX WASHER HD #12 X 1-1/4"
X12X114T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
METAL SCREW PHILLIPS FLAT HEAD #12 X 1"
X12X1FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 12
- Screw length 1 inch
Refine
2 More
6 More