Screws
METAL SCREW SQ DRIVE FLAT HEAD #10 X 1-1/2"
X10X112FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1-1/2 inches
TEK SCREW PHILLIPS PAN HEAD #10 X 1-1/2" BLACK
X10X112PT2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel Black Oxide
METAL SCREW PHILLIPS FLAT HEAD #10 X 1-1/4"
X10X114FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1-1/4 inches
SHEET METAL SCREW SQ DR PAN HD #10 X 1-1/4"
X10X114RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 1-1/4"
TEK SCREW SQUARE DRIVE PAN HD #10 X 1-1/4"
X10X114RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1-1/4"
TEK SCREW PHILLIPS PAN HEAD #10 X 1-1/4"
X10X114PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
TEK SCREW SQUARE-DRIVE PAN HD #10 X 1-1/4" BLACK PAINTED HEAD, 100/BX
X10X114RHT2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Round washer head, phillips drive
- Zinc plated steel with black painted heads
SHEET METAL SCREW SLOTTED HEX WASHER HD #10 X 1/2" STAINLESS
X10X12HSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Hex head.
METAL SCREW PAN HEAD PHILLIPS #10 X 1/2" BLACK OXIDE
X10X12P2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
SHEET METAL SCREW PHIL FLAT HD #10 X 1/2" STAINLESS
X10X12FHPS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- 10 X 1/2"
SHEET METAL SCREW SQ DR PAN HD #10 X 1/2"
X10X12RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 10
- Screw length is 1/2 inch
TEK SCREW SQUARE DRIVE PAN HD #10 X 1/2"
X10X12RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1/2"
METAL SCREW PHILLIPS FLAT HEAD #10 X 1"
X10X1FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1 inch
TEK SCREW FLAT HEAD PHILLIPS #10 X 1"
X10X1FHPT
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Flat head phillips head
- Steel zinc plated
Refine
2 More
6 More