Hand Tools
WELDING CHIPPING HAMMER SPRING HANDLE
CHHAM
- Contains both pick and chisel.
- Wire spring handle.
- Drop forged heat-treated head, and welded- on head.
- Durable design for extended long life use.
$0.00
CABLE TIE TENSION TOOL 18-50 LB, MANUAL TWIST CUT
TRT
- Economical cable tie tool.
- Quickly tensions and cuts off excess strap without leaving a sharp protrusion that can cause snags, cuts and abrasions to cables, hoses, products and users.
- Is the most cost-effective for the occasional user.
- This lightweight and durable tool easily fits into narrow and tight spaces.
- Quickly tensions and cuts excess strap with a twist of the tool.
- Will cut 18, 40 and 50 lb. rated cable ties.
$0.00
VEGA TOOLS KEYCHAIN BIT HOLDERS, BLACK, 5 PIECES
VKBH5-2
- 5 pc bit holder set - Black
- Carabiner included
- Quick access to your most critical bits
- Compact design makes it easy to carry
$0.00
VEGA TOOLS 1/2" KEYLESS CHUCK ADAPTER
VKCA
- S2 Steel 1/4" hex shank
- Jaw opens to 1/2" and can be used with bits up to 1/2" in diameter
- Jaw design locks both hex and round shank bits in place
$0.00
VEGA TOOLS RIGHT ANGLE ADAPTER FOR IMPACT DRIVER AND DRILL DRIVER USE
VRAA
- S2 Steel 1/4" hex shank
- Adjustable/ locking handle
- Rated for impact and drill driver use
$0.00
VEGA TOOLS KEYCHAIN BIT HOLDERS, BLUE, 5 PIECES
VKBH5-6
- 5 pc bit holder set - Blue
- Carabiner included
- Quick access to your most critical bits
- Compact design makes it easy to carry
$0.00
VEGA TOOLS SCREW EXTRACTOR SET, 3 PIECES
VSE3S
- 3 pc Screw Extractor Set
- #1 - extractor size, screw size #4-#7, SAE bolt size #10-#12, and MM bolt size 5mm
- #2 - extractor size, screw size #8-#10, SAE bolt size 1/4", and MM bolt size 6mm
- #3 - extractor size, screw size #11-#14, SAE bolt size 5/16", and MM bolt size 8mm
$0.00
PEERLESS 3/8 OR 1/2 CHAIN TENSIONER
XH51250858
- LOAD BINDER
- PEERLESS RATCHETING LOAD BINDER
- For 3/8" and 1/2" chain
- Three position pawl
- Folding handle
$0.00
IRWIN UTILITY SNIP 1-5/16" CUT L, AVIATION, STRAIGHT/WIDE-CURVE CUTS
XI2073113
- Irwin
- 10" long
- Serrated cutting edge
- Cushion grip handles
- Cutting length of 1-5/16"
$0.00
NUTSERT MANDREL FOR 1/4-20 FOR 39200
XM39258
- Nut sert tool mandrel.
- 1/4-20" size for Marson 39200 tool.
- Is for the older model tool, not the current NST tool.
$0.00
LOOM INSTALLATION TOOL FOR 1/4
XW570
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 1/4".
$0.00
LOOM TOOL/ WIRE INSERTION FOR MAXIMUM DIAMETER OF 3/8"
XW571
- Split loom insertion tool.
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 3/8".
$0.00
LOOM TOOL/ WIRE INSERTION FOR 1/2" TO 5/8"
XW572
- Split loom insertion tool.
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 1/2" and 5/8".
$0.00
LOOM TOOL/ WIRE INSERTION FOR MAXIMUM DIAMETER OF 3/4"
XW573
- Split loom insertion tool.
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 3/4".
$0.00
LOOM TOOL/ WIRE INSERTION FOR MAXIMUM DIAMETER OF 1"
XW574
- Split loom insertion tool.
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 1".
$0.00
KNIPEX RATCHETING KNIFE 5 3/4"
RK534
- Ratchet function enables stripping with less effort for a variety of large diameter cables
- Multi-functional blade featuring three cutting areas for round and longitudinal cuts
- Guide shoe prevents damaging conductor insulation under the cable jacket/insulation
- Strips hard or tough plastic jacket/insulation up to 1/4" thick
- Replaceable hook blade can be folded for transport and storage
- Three-stage lock for blade positioning
- 5-3/4" overall length
$0.00
FLEXIBLE BIT RATCHET SET - 20 PIECES
VFBR20
- Phillips bits P1, P2, and P3
- Torx Bits T15, T20, T25, T27, and T30
- SAE 1/8", 5/32", and 3/16"
- Metric 2.5mm, 3mm, 4mm, and 5mm
- Square Drive R2
- 1/4" Square drive hex adapter
- 1/4" Flexible head mag bit ratchet X 6"
- 1/4" Bit ratchet extension bar X 4"
$0.00
KNIPEX PLIERS WRENCH SET 7", 10", 12", 3 PIECES
PW3S
- 3-piece set with custom molded plastic tray included for easy tool storage
- Pliers Wrench is an innovative tool combining the functions of each tool in one
- Ideal for tasks like gripping, turning, pressing, and bending
- Multiple adjustment positions at the touch of a button
- Laser-etched scale allows wrench opening to be set before gripping - in metric and inch markings
- Available lengths of 7-1/4", 10", & 12"
- Number of adjustments by tool size 7-1/4" (15), 10" (19), & 12" (24)
$0.00
CHUCK KEY - LARGE MASTER, 3/8"- 3/4"
MCKL
- Carbon steel master chuck key.
- Opens heavy duty chucks 3/8" to 3/4".
- The squared center of the key opens acetylene tanks.
- Made from carbon steel.
$0.00
Refine
36 More
18 More