Hand Tools
WELDING CHIPPING HAMMER SPRING HANDLE
CHHAM
- Contains both pick and chisel.
- Wire spring handle.
- Drop forged heat-treated head, and welded- on head.
- Durable design for extended long life use.
$0.00
KLEIN CRIMPING AND CUTTING TOOL FOR CONNECTORS
CT1005
- 9 ¾” crimping and cutting tool.
- Crimping die marked for insulated or non-insulated solderless terminals and connectors.
- Tapered nose design for working in confined spaces.
- Specially hardened wire cutter in nose.
- Hot- riveted joint for smooth action and no handle wobble.
- Plastic dipped cushioned handles for comfort.
- Crimps 10 to 22 gauge terminals.
$0.00
KLEIN CRIMPING/CUTTING TOOL FOR TERMINALS
CT1006
- 9-¾" crimping and cutting tool.
- Designed for crimping non-insulated solderless terminals and connectors.
- Crimps 10 to 22 gauge non-insulated terminals.
- Tapered nose design for working in confined spaces.
- Specially hardened wire cutter in nose.
- Hot- riveted joint for smooth action and no handle wobble.
- Plastic dipped cushioned handles for comfort.
$0.00
RATCHETING CRIMP TOOL FOR HEAT SHRINK CONNECTORS (12-10, 16-14, 22-18 AWG)
HSRCT3
- Designed to crimp Heat shrink terminals
- 12-10, 16-14, 22-18 AWG
- Won't damage or cut heat shrink tubing
- Narrow crimp profile makes it easy to align on crimp barrel
- Ratcheting design provides the proper amount of force to each size connector
- A trouble free full-cycle mechanism that assures consistenent terminations
$0.00
RIVET SET TOOL 3/32" - 3/16"
PRT
- Hand rivet tool.
- Known and trusted for durability, quality and performance.
- Its square shoulder fulcrum pin is made from cold-formed heat-treated steel.
- Precision die-case, high-strength aluminum alloy body.
- Drop-forged carbon steel upper handle with thick cushion-molded vinyl grips for comfort.
- Will set up to 3/16" steel rivets.
- Comes with nosepieces for 3/32", 1/8", 5/32" and 3/16" rivets and a service wrench.
$0.00
CABLE TIE TENSION TOOL 18-50 LB, MANUAL TWIST CUT
TRT
- Economical cable tie tool.
- Quickly tensions and cuts off excess strap without leaving a sharp protrusion that can cause snags, cuts and abrasions to cables, hoses, products and users.
- Is the most cost-effective for the occasional user.
- This lightweight and durable tool easily fits into narrow and tight spaces.
- Quickly tensions and cuts excess strap with a twist of the tool.
- Will cut 18, 40 and 50 lb. rated cable ties.
$0.00
VEGA TOOLS BOLT EXTRACTOR SET - 5 PIECES
VBES5
- 5 pc Bolt Extractor Set
- 1/4" impact bolt extractor X 2-9/16"
- 5/16" impact bolt extractor X 2-9/16"
- 3/8" impact bolt extractor X 2-9/16"
- 7/16" impact bolt extractor X 2-9/16"
- 1/2" impact bolt extractor X 2-9/16"
$0.00
VEGA TOOLS BIT RATCHET & EXTENSION MASTER SET
VBRES
- 1/4" Flexible head mag bit ratchet X 6"
- 1/4" Bit ratchet extension bar X 4"
- 1/4" Dual drive mag bit ratchet X 4-1/2"
- 1/4" Mini bit ratchet X 3-1/2"
$0.00
VEGA TOOLS FLEXIBLE BIT RATCHET SET - 20 PIECES
VFBR20
- Phillips bits P1, P2, and P3
- Torx Bits T15, T20, T25, T27, and T30
- SAE 1/8", 5/32", and 3/16"
- Metric 2.5mm, 3mm, 4mm, and 5mm
- Square Drive R2
- 1/4" Square drive hex adapter
- 1/4" Flexible head mag bit ratchet X 6"
- 1/4" Bit ratchet extension bar X 4"
$0.00
VEGA TOOLS KEYCHAIN BIT HOLDERS, BLACK, 5 PIECES
VKBH5-2
- 5 pc bit holder set - Black
- Carabiner included
- Quick access to your most critical bits
- Compact design makes it easy to carry
$0.00
VEGA TOOLS 1/2" KEYLESS CHUCK ADAPTER
VKCA
- S2 Steel 1/4" hex shank
- Jaw opens to 1/2" and can be used with bits up to 1/2" in diameter
- Jaw design locks both hex and round shank bits in place
$0.00
VEGA TOOLS RIGHT ANGLE ADAPTER FOR IMPACT DRIVER AND DRILL DRIVER USE
VRAA
- S2 Steel 1/4" hex shank
- Adjustable/ locking handle
- Rated for impact and drill driver use
$0.00
VEGA TOOLS KEYCHAIN BIT HOLDERS, BLUE, 5 PIECES
VKBH5-6
- 5 pc bit holder set - Blue
- Carabiner included
- Quick access to your most critical bits
- Compact design makes it easy to carry
$0.00
VEGA TOOLS SCREW EXTRACTOR SET, 3 PIECES
VSE3S
- 3 pc Screw Extractor Set
- #1 - extractor size, screw size #4-#7, SAE bolt size #10-#12, and MM bolt size 5mm
- #2 - extractor size, screw size #8-#10, SAE bolt size 1/4", and MM bolt size 6mm
- #3 - extractor size, screw size #11-#14, SAE bolt size 5/16", and MM bolt size 8mm
$0.00
VEGA TOOLS TORQUE LIMITING SCREWDRIVER SET, 20 PIECES
VSSTL20
- 20 piece set
- 1 Torque screwdriver
- Phillips #0, #1, #2, and #3
- Slotted 3/16" and 1/4"
- Torx T10, T15, T20, T25, and T30
- SAE Hex 1/8", 5/32", and 3/16"
- Metric Hex 3mm, 4mm, and 5mm
- Square Drive #2
- 1/4" Square drive socket adaptor
$0.00
VEGA TOOLS 1/2" X 1/2" UNIVERSAL JOINT IMPACT SOCKET ADAPTER X 2.5" PIN
VUNI12
- 1/2 X 1/2 Universal joint impact socket adapter X 2.5" pin
- Drive angles up to 30 degrees
- Allows you to use impact sockets in hard-to-reaech areas
- Available in 3 drive sizes 1/4", 3/8", and 1/2"
$0.00
VEGA TOOLS 1/4" X 1/4" UNIVERSAL JOINT IMPACT SOCKET ADAPTER X 1.5" PIN
VUNI14
- 1/4 X 1/4 Universal joint impact socket adapter X 1.5" pin
- Drive angles up to 30 degrees
- Allows you to use impact sockets in hard-to-reaech areas
- Available in 3 drive sizes 1/4", 3/8", and 1/2"
$0.00
VEGA TOOLS 3/8" X 3/8" UNIVERSAL JOINT IMPACT SOCKET ADAPTER X 2" PIN
VUNI38
- 3/8 X 3/8 Universal joint impact socket adapter X 2" pin
- Drive angles up to 30 degrees
- Allows you to use impact sockets in hard-to-reaech areas
- Available in 3 drive sizes 1/4", 3/8", and 1/2"
$0.00
PEERLESS 3/8 OR 1/2 CHAIN TENSIONER
XH51250858
- LOAD BINDER
- PEERLESS RATCHETING LOAD BINDER
- For 3/8" and 1/2" chain
- Three position pawl
- Folding handle
$0.00
IRWIN UTILITY SNIP 1-5/16" CUT L, AVIATION, STRAIGHT/WIDE-CURVE CUTS
XI2073113
- Irwin
- 10" long
- Serrated cutting edge
- Cushion grip handles
- Cutting length of 1-5/16"
$0.00
LOOM INSTALLATION TOOL FOR 1/4
XW570
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 1/4".
$0.00
LOOM TOOL/ WIRE INSERTION FOR MAXIMUM DIAMETER OF 3/8"
XW571
- Split loom insertion tool.
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 3/8".
$0.00
LOOM TOOL/ WIRE INSERTION FOR 1/2" TO 5/8"
XW572
- Split loom insertion tool.
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 1/2" and 5/8".
$0.00
Refine
36 More
18 More