Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
RIVET BUTTON HEAD ALUM/STEEL 3/16 DIAM GRIP .251-.375
ASD66B
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 3/16
- Grip range .251-.375
- Head style: Button head
RIVET LARGE FLANGE ALUM/STEEL 3/16 DIAM GRIP .251-.375
ASD66LFB
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .251-.375
- Head style: Large flange
RIVET BUTTON HEAD ALUM/STEEL 3/16 DIAM GRIP .376-.500
ASD68B
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 3/16
- Grip range .376-.500
- Head style: Button head
RIVET LARGE FLANGE ALUM/STEEL 3/16 DIAM GRIP .376-.500
ASD68LFB
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .376-.500
- Head style: Large flange
THREADED ROD UNF ZINC 1"-14, GRADE A, 3 FOOT LENGTH
ATR1F
- Commonly referred to as fully threaded rod.
- Used for general purpose fastening for anything from an anchor bolt to a through bolt.
- Low carbon Grade A steel.
- Zinc plated.
- Tensile Strength: 60,000 PSI minimum.
- Diameter: 1"-14.
- 3 foot rod, fully threaded.
E-CLIP, RETAINING 1/8" SHAFT
EC18
- Stamped clips for deep grooves with three prongs that yield high thrust load capacity.
- Designed for radial installation into machined grooves on shafts of varying diameter.
- E clips require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 1/8".
RETAINING/SNAP RING EXTERNAL, 1/4"
ERR14
- A ring-shaped stamping with one opening on the circumference.
- The two ends at the opening are called lugs and flare out slightly allowing for easier installation onto shaft.
- Installed axially on to a shaft.
- Allows for complete contact and tightness in a groove.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 1/4".
RETAINING/SNAP RING EXTERNAL, 3/8"
ERR38
- A ring-shaped stamping with one opening on the circumference.
- The two ends at the opening are called lugs and flare out slightly allowing for easier installation onto shaft.
- Installed axially on to a shaft.
- Allows for complete contact and tightness in a groove.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 3/8".
RETAINING/SNAP RING EXTERNAL, 1/2"
ERR50
- A ring-shaped stamping with one opening on the circumference.
- The two ends at the opening are called lugs and flare out slightly allowing for easier installation onto shaft.
- Installed axially on to a shaft.
- Allows for complete contact and tightness in a groove.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 1/2".
RETAINING/SNAP RING EXTERNAL, 7/16"
ERR76
- A ring-shaped stamping with one opening on the circumference.
- The two ends at the opening are called lugs and flare out slightly allowing for easier installation onto shaft.
- Installed axially on to a shaft.
- Allows for complete contact and tightness in a groove.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 7/16".
FLATHEAD THREADED NUT UNC STEEL #10-32 GRIP RANGE .010-.080 25/BX
FTNS1032
- Steel Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .250 min .254 max
FLAT WASHER USS STAINLESS #10 1000/BAG
FW10SS-M
- Used to improve stress distribution, and to span large holes
- USS PATTERN
- Used where parts are subject to corrosion
- Made from 18-8 stainless steel
- Case Quantity: 1,000
HELICALLY COILED INSERT KIT UNC 1/2"-13
HCI12CK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:1/2"-13
- Drill size: 17/32
HELICALLY COILED INSERT KIT UNC 1/4"-20
HCI14CK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:1/4"-20
- Drill size: 17/64
HELICALLY COILED INSERT KIT UNC 3/8"-16
HCI38CK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:3/8"-16
- Drill size: 25/64
HELICALLY COILED INSERT KIT UNC 5/16"-18
HCI56CK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:5/16"-18
- Drill size: 21/64
HELICALLY COILED INSERT KIT UNF 5/16"-24
HCI56FK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:5/16"-24
- Drill size: 21/64
HELICALLY COILED INSERT KIT UNF 7/16"-20
HCI76FK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:7/16"-20
- Drill size: 29/64
HELICALLY COILED INSERT KIT M10 X 1.25
HCIM10X1.25K
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M10 X 1.25
- Drill size: 13/32
HELICALLY COILED INSERT KIT M5 X 0.80
HCIM5X.8K
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M5 X 0.8
- Drill size: 13/64
HELICALLY COILED INSERT KIT M8 X 1.25
HCIM8X1.25K
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M8 X 1.25
- Drill size: 21/64
HELICALLY COILED INSERT KIT M10 X 1.50
HCIM10X1.5K
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M10 X 1.50
- Drill size: 13/32
HELICALLY COILED INSERT KIT M6 X 1.00
HCIM6X1K
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M6 X 1.00
- Drill size: 1/4
HITCH PIN - ZINC .093 DIAMETER, 1-5/8" LENGTH
HP203
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.093.
- Length of 1-5/8 inches.
Refine
10 More
2 More
45 More
49 More
1 More