Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
CUP-POINT SOCKET SET-SCREW #8-32 X 1/2"
83212CPS
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #8-32
- Length: 1/2"
$0.00
CUP-POINT SOCKET SET-SCREW #8-32 X 1/4"
83214CPS
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #8-32
- Length: 1/4"
$0.00
RIVET BUTTON HEAD ALUM/STEEL 1/8 DIAMETER GRIP .188-.250
ASD44
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 1/8
- Grip range .188-.250
- Head style: Button head
$0.00
RIVET BUTTON HEAD ALUM/STEEL 1/8 DIAMETER GRIP .313-.375
ASD46
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 1/8
- Grip range .313-.375
- Head style: Button head
$0.00
RIVET BUTTON HEAD ALUM/STEEL 5/32 DIAMETER GRIP .188-.250
ASD54
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 5/32
- Grip range .188-.250
- Head style: Button head
$0.00
RIVET BUTTON HEAD ALUM/STEEL 5/32 DIAMETER GRIP .251-375
ASD56
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 5/32
- Grip range .251-.375
- Head style: Button head
$0.00
RIVET BUTTON HEAD ALUM/STEEL 3/16 DIAMETER GRIP .501-.625
ASD610
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 3/16
- Grip range .501-.625
- Head style: Button head
$0.00
RIVET LARGE FLANGE ALUM/STEEL 3/16 DIAMETER GRIP .501-.625
ASD610LF
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .501-.625
- Head style: Large flange
$0.00
RIVET BUTTON HEAD ALUM/STEEL 3/16 DIAMETER GRIP .626-.750
ASD612
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 3/16
- Grip range .626-.750
- Head style: Button head
$0.00
RIVET LARGE FLANGE ALUM/STEEL 3/16 DIAMETER GRIP .626-.750
ASD612LF
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .626-.750
- Head style: Large flange
$0.00
RIVET BUTTON HEAD ALUM/STEEL 3/16 DIAMETER GRIP .062-.125
ASD62
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 3/16
- Grip range .062-.125
- Head style: Button head
$0.00
RIVET BUTTON HEAD ALUM/STEEL 3/16 DIAMETER GRIP .126-.250
ASD64
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 3/16
- Grip range .126-.250
- Head style: Button head
$0.00
RIVET LARGE FLANGE ALUM/STEEL 3/16 DIAMETER GRIP .062-.250
ASD64LF
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .062-.250
- Head style: Large flange
$0.00
RIVET LARGE FLANGE ALUM/STEEL 3/16 DIAMETER GRIP .251-.375
ASD66LF
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .251-.375
- Head style: Large flange
$0.00
RIVET BUTTON HEAD ALUM/STEEL 3/16 DIAMETER GRIP .376-.500
ASD68
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite side of work.
- Simple to install.
- Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications.
- Most popular rivet style because of its neat appearance.
- Rivet diameter is 3/16
- Grip range .376-.500
- Head style: Button head
$0.00
RIVET LARGE FLANGE ALUM/STEEL 3/16 DIAMETER GRIP .376-.500
ASD68LF
- Aluminum rivet and steel mandrel.
- For blind fastening where there is no access to opposite of work.
- Simple to install.
- Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes.
- Works well with soft materials, where the increased flange diameter protects the integrity of the application.
- Rivet diameter is 3/16
- Grip range .376-.500
- Head style: Large flange
$0.00
E-CLIP, RETAINING 1" SHAFT
EC1
- Stamped clips for deep grooves with three prongs that yield high thrust load capacity.
- Designed for radial installation into machined grooves on shafts of varying diameter.
- E clips require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 1".
$0.00
E-CLIP, RETAINING 1/4" SHAFT
EC14
- Stamped clips for deep grooves with three prongs that yield high thrust load capacity.
- Designed for radial installation into machined grooves on shafts of varying diameter.
- E clips require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 1/4".
$0.00
E-CLIP, RETAINING 3/4" SHAFT
EC34
- Stamped clips for deep grooves with three prongs that yield high thrust load capacity.
- Designed for radial installation into machined grooves on shafts of varying diameter.
- E clips require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 3/4".
$0.00
E-CLIP, RETAINING 3/16" SHAFT
EC36
- Stamped clips for deep grooves with three prongs that yield high thrust load capacity.
- Designed for radial installation into machined grooves on shafts of varying diameter.
- E clips require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 3/16".
$0.00
E-CLIP, RETAINING 3/8" SHAFT
EC38
- Stamped clips for deep grooves with three prongs that yield high thrust load capacity.
- Designed for radial installation into machined grooves on shafts of varying diameter.
- E clips require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 3/8".
$0.00
E-CLIP, RETAINING 1/2" SHAFT
EC50
- Stamped clips for deep grooves with three prongs that yield high thrust load capacity.
- Designed for radial installation into machined grooves on shafts of varying diameter.
- E clips require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 1/2".
$0.00
E-CLIP, RETAINING 5/16" SHAFT
EC56
- Stamped clips for deep grooves with three prongs that yield high thrust load capacity.
- Designed for radial installation into machined grooves on shafts of varying diameter.
- E clips require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 5/16".
$0.00
E-CLIP, RETAINING 7/8" SHAFT
EC78
- Stamped clips for deep grooves with three prongs that yield high thrust load capacity.
- Designed for radial installation into machined grooves on shafts of varying diameter.
- E clips require a deeper groove, but provide exceptional thrust loadings when compared to fasteners of the same size and weight.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 7/8".
$0.00