Abrasives
CUT OFF WHEEL HIGH SPD TYPE 1 4" DIAM, 1/16" W, 3/8"
COW4X16X38
- 4" Diameter
- 1/16" Width
- 3/8" Bore
- 19,000 Max RPM
- Type 1 fast cutting cut off wheel. Square, burr-free cutting.
- For use with die grinder.
- Aluminum oxide grain.
- Hard bond for aggressive cutting on rough applications.
- Great for ferrous metals (iron, steel, welds, etc.). Also good for stainless steel
FLAP DISC - JUMBO W/HUB 4-1/2" D, 5/8"-11 ARB 120 GRIT
FDJ412X58HX120
- 4-1/2" Diameter
- 5/8"-11 Arbor
- 120 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
FLAP DISC - JUMBO W/HUB 4-1/2" D, 5/8"-11 ARB 40 GRIT
FDJ412X58HX40
- 4-1/2" Diameter
- 5/8"-11 Arbor
- 40 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
FLAP DISC - JUMBO W/HUB 4-1/2" D, 5/8"-11 ARB 60 GRIT
FDJ412X58HX60
- 4-1/2" Diameter
- 5/8"-11 Arbor
- 60 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
FLAP DISC - JUMBO W/HUB 4-1/2" D, 5/8"-11 ARB 80 GRIT
FDJ412X58HX80
- 4-1/2" Diameter
- 5/8"-11 Arbor
- 80 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
FLAP DISC - JUMBO 4-1/2" D, 7/8" ARB 120 GRIT
FDJ412X78X120
- 4-1/2" Diameter
- 7/8" Arbor
- 120 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
FLAP DISC - JUMBO 4-1/2" D, 7/8" ARB 40 GRIT
FDJ412X78X40
- 4-1/2" Diameter
- 7/8" Arbor
- 40 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
FLAP DISC - JUMBO 4-1/2" D, 7/8" ARB 60 GRIT
FDJ412X78X60
- 4-1/2" Diameter
- 7/8" Arbor
- 60 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
FLAP DISC - JUMBO 4-1/2" D, 7/8" ARB 80 GRIT
FDJ412X78X80
- 4-1/2" Diameter
- 7/8" Arbor
- 80 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
ROLOC BRISTLE - DISC 3" 50 GRIT, 5/8" TAPERED
RBD3-50T
- Fast running bristle disc with Roloc attachment.
- 3" diameter.
- 50 grit.
- Color: green.
- 5/8” thick.
- Tapered center.
- Efficiently clean or strip many substances from metal surfaces without damaging the work piece.
- Quickly and easily achieve a quality, consistent finish with light pressure.
ROLOC BRISTLE - DISC 3" 80 GRIT, 5/8" TAPERED
RBD3-80T
- Fast running bristle disc with Roloc attachment.
- 3" diameter.
- 80 grit.
- Color: yellow.
- 5/8” thick.
- Tapered center.
- Efficiently clean or strip many substances from metal surfaces without damaging the work piece.
- Quickly and easily achieve a quality, consistent finish with light pressure.
ROLOC COATING REMOVAL DISC 3" EXTRA COARSE - 3M 18350
RCRD3
- Coating removal disc
- Heavy duty, semi-open web used to clean rust and paint.
- Silicon carbide mineral
- Roloc attachment style.
- 3" diameter
- Extra coarse grade
- Color: black
- Max RPM: 15,000
ROLOC DISC PAD ASSEMBLY DISC 2 3M 05539
RDPA2
- Rubber disc pad holder for roloc surface conditioning discs.
- Comes with a 1/4” diameter shank to fit 1/4” collet chucks or drill chucks.
- Pad also has a 1/4” -20 INT thread which allows it to be mounted directly to tools with included shank.
- 2" diameter
- Medium density rating
- Max RPM: 25,000
- Color: black
ROLOC DISC PAD ASSEMBLY DISC 3 3M 05540
RDPA3
- Rubber disc pad holder for roloc surface conditioning discs.
- Comes with a 1/4” diameter shank to fit 1/4” collet chucks or drill chucks.
- Pad also has a 1/4” -20 INT thread which allows it to be mounted directly to tools with included shank.
- 3" diameter
- Medium density rating
- Max RPM: 18,000
- Color: black
SHOP ROLL UTILITY CLOTH - 3M 120 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X120
- 3M utility cloth roll.
- 1-1/2" wide material.
- 120 grit.
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
SHOP ROLL UTILITY CLOTH - 3M 180 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X180
- 3M utility cloth roll.
- 1-1/2" wide material.
- 180 grit.
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
SHOP ROLL UTILITY CLOTH - 3M 320 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X320
- 3M utility cloth roll.
- 1-1/2" wide material.
- 320 grit.
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
SHOP ROLL UTILITY CLOTH - 3M 400 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X400
- 3M utility cloth roll.
- 1-1/2" wide material.
- 400 grit.
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
SHOP ROLL UTILITY CLOTH - 3M 80 GRIT, 1-1/2" W, 50 YD ROLL
3MSR112X80
- 3M utility cloth roll.
- 1-1/2" wide material.
- 80 grut,
- Aluminum oxide grain.
- Constructed on a durable cloth backing.
- For metal and woodworking.
ROLOC DISC-SURF COND DISC 2" COR, 05528,07488,07588,07480
RSCD2C
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 2" diameter.
- Coarse grade.
- Color: brown.
- Max RPM: 25,000
- Used for cleaning, finishing, blending and deburring.
ROLOC DISC-SURF COND DISC 3" COR, 05532,07485,07585
RSCD3C
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 3" diameter.
- Coarse grade.
- Color: brown.
- Max RPM: 20,000
- Used for cleaning, finishing, blending and deburring.
ROLOC DISC-SURF COND DISC 3" MED, 05531,07486,07586
RSCD3M
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 3" diameter.
- Medium grade.
- Color: maroon.
- Max RPM: 20,000
- Used for cleaning, finishing, blending and deburring.
ROLOC DISC-SURF COND DISC 2" MED, 05527,07481,07489,07589
RSCD2M
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 2" diameter.
- Medium grade.
- Color: maroon.
- Max RPM: 25,000
- Used for cleaning, finishing, blending and deburring.
SHOP ROLL UTILITY CLOTH 320 GRIT, 1-1/2" W, 50 YD ROLL
SR112X320
- Aluminum oxide grain.
- 1-1/2" wide material.
- 320 grit.
- High quality material for high flexibility.
- Medium tensile strength.
- Open coat structure prevents loading.
- Primarily for hand applications.
- Use on ferrous and/or non-ferrous material such as iron, aluminum, copper, normal and high tensile steel.
- Also can be used on wood, fiberglass, etc.