Abrasives
ROLOC BRISTLE - DISC 2" 80 GRIT, 5/8" TAPERED
RBD2-80T
- Fast running bristle disc with Roloc attachment.
- 2" diameter.
- 80 grit.
- Color: yellow.
- 5/8” thick.
- Tapered center.
- Efficiently clean or strip many substances from metal surfaces without damaging the work piece.
- Quickly and easily achieve a quality, consistent finish with light pressure.
CUT OFF WHEEL, CERAMIC, 4-1/2" X .045 X 7/8", TYPE 27, 36 GRIT
XCGW54283
- 4-1/2 x .045 x 7/8
- CER24-TBF Grain
- 36 Grit
- Type 27
- 13,300 Max RPM
- Extremely Fast Cutting - high performance sharp CERAMIC grain
- Advanced bonding system - specially engineered to provide long life and fast cut
- Labor cost savings - much faster cutting rate compared to conventional cut-off wheels
- Time cost saving - fewer tool changes due to very long wheel life
- Can be used on steel and stainless steel
- Maximum performance on high power machines
CUT OFF WHEEL 4-1/2" 1/16 THICKNESS 7/8 ARBOR
XCOW412X16X78
- 4-1/2" Diameter
- 1/16" Width
- 7/8" Bore
- 13,000 Max RPM
- Type 1 fast cutting cut off wheel. Square, burr-free cutting.
FLAP WHEEL W/1/4" MANDREL 1" DIAM, 1" W, 120 GRIT
XFW1X1X120
- 1" diameter
- 1/4" shank
- 120 Grit X 1" width
- 30,000 Max RPM
- Aluminum Oxide
- Use on steel, stainless steel, iron, brass, aluminum, plastic, fiberglass, wood and glass.
- Exellent for working in small, difficult to reach places
FLAP WHEEL W/1/4" MANDREL 1" DIAM, 1" W, 60 GRIT
XFW1X1X60
- 1" diameter
- 1/4" shank
- 60 Grit x 1" width
- 30,000 Max RPM
- Aluminum Oxide
- Use on steel, stainless steel, iron, brass, aluminum, plastic, fiberglass, wood and glass.
- Excellent for working in small, difficult to reach places
FLAP WHEEL 1/4" MANDREL 2-1/2" DIAMETER X 1" WIDTH X 60 GRIT
XFW212X1X60
- 2-1/2" diamter
- 1/4" shank
- 60 Grit x 1" width
- 20,000 Max RPM
- Use on steel, stainless steel, iron, brass, aluminum, plastic, fiberglass, wood and glass
- Excellent for working in small, difficult to reach places
3M ROLOC ABRASIVE DISC 2" 60 GRIT
XGCRD2-60
- General purpose abrasive disc.
- Aluminum oxide grain.
- Constructed on a water resistant polyester cloth backing.
- Can be run wet or dry.
- Roloc attachment style.
MINI FLAP DISC ROLOC 3" 40 GRIT
XMRFD3X40
- Aggressive grinding for tight areas.
- 3" diameter.
- 40 grit.
- Combines grinding and finishing.
- Cotton layers cushion cutting action.
- Great for removing cutting torch slag from steel and grinding welds.
- Layers cut through to continually expose fresh grain.
- Quick change mini flap disc.
- Roloc style connector for easy use.
MINI FLAP DISC ROLOC 3" 60 GRIT
XMRFD3X60
- Aggressive grinding for tight areas.
- 3" diameter.
- 60 grit.
- Combines grinding and finishing.
- Cotton layers cushion cutting action.
- Great for removing cutting torch slag from steel and grinding welds.
- Layers cut through to continually expose fresh grain.
- Quick change mini flap disc.
- Roloc style connector for easy use.
WEILER CRIMPED WIRE END BRUSH, STEEL, 1 X 1
XW10009
- 1" diameter
- Wire size .006
- Trim Length 1"
- 22,000 Max RPM
- Crimped Wire 1/4" shank size
ROLOC DISC PAD ASSEMBLY 3"
XRDPA3
- Rubber disc pad for roloc surface conditioning discs
- 3" diameter
- 1/4" roll on
- External Thread
3M ROLOC DISC SURFACE CONDITIONING 2" COARSE
XRSCD2C
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 2" diameter.
- Coarse grade.
3M ROLOC SURF COND DISC 2 VERY FINE TEAL
XRSCD2VFN
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 2" diameter.
- Very fine grade.
- Color: blue/green.
- Max RPM: 25,000
- Used for cleaning, finishing, blending and deburring.
3M ROLOC SURFACE CONDITIONG DISC 3" MEDIUM
XRSCD3M
- Non-woven abrasive product.
- Aluminum oxide grain.
- Roloc attachment style.
- 3" diameter.
- Medium grade.
GRINDING WHEEL TYPE 27 W/HUB 4-1/2" D, 1/4" W, 5/8"-11
GW412X14X58H
- 4-1/2" Diameter
- 1/4" Width
- 5/8"-11 Bore
- 13,300 Max RPM
- Type 27 depressed center grinding wheel.
- Aluminum oxide grain.
- Soft bond for fast stock removal.
- For use on ferrous metals such as iron, steel, welds, etc and low grade stainless steel.
CUT OFF WHEEL 4-1/2" X .045" X 7/8" ARBOR, TYPE 1
XCOW412X.045X78
- 4-1/2" diameter
- .045 width
- 7/8" bore
- 13,300 Max RPM
- Type 1 fast cutting cut off wheel
- Rigid design for fast cutting and longer life
CUT OFF WHEEL HIGH SPD TYPE 1 3" DIAM, 1/16" W, 3/8"
COW3X16X38
- 3" Diameter
- 1/16" Width
- 3/8" Bore
- 25,000 Max RPM
- Type 1 fast cutting cut off wheel. Square, burr-free cutting.
- For use with die grinder.
- Aluminum oxide grain.
- Hard bond for aggressive cutting on rough applications.
- Great for ferrous metals (iron, steel, welds, etc.). Also good for stainless steel
ROLOC ABRASIVE - DISC 3" 36 GRIT
GCRD3-36
- General purpose abrasive disc.
- Aluminum oxide grain.
- Constructed on a water resistant polyester cloth backing.
- Can be run wet or dry.
- Roloc attachment style.
- 3" diameter, 36 grit.
- Closed coat.
- Brown roloc button.
- Max RPM: 20,000
- Primary markets: metalworking, woodworking.
CUT OFF WHEEL HIGH SPD TYPE 1 3" DIAM, 1/16" W, 3/8" BORE
XCOW3X16X38
- 3" diameter
- 3/8" Arbor
- 1/16" Thick 36 Grit
- 23,900 Max RPM
- Aluminum Oxide Die Grinder Wheel
- For cutting steel
CUTTING WHEEL TYPE 27 7" DIAM, .045" W, 7/8 BORE
XUA22053
- 7" diameter Type 27
- 7/8" arbor .045 Thick
- 8,500 Max RPM
- Aluminum Oxide
- Extremely fast burr-free cutting with long life
- For ferrous and/or non-ferrous metals
- iron, steel, welds etc
