Abrasives
3M ROLOC ABRASIVE DISC 3", 80 GRIT
XGCRD3-80
- General purpose abrasive disc.
- Aluminum oxide grain.
- Constructed on a water resistant polyester cloth backing.
- Can be run wet or dry.
- Roloc attachment style.
- 3" diameter, 80 grit.
- Closed coat.
- Yellow roloc button
- Max RPM: 20,000
- Primary markets: metalworking, woodworking.
$0.00
CUT OFF WHEEL HIGH SPD TYPE 1 3" DIAM, .035" W, 3/8"
COW3X.035X38
- 3" Diameter
- .035" Width
- 3/8" Bore
- 25,000 Max RPM
- Type 1 fast cutting cut off wheel. Square, burr-free cutting.
- For use with die grinder.
- Aluminum oxide grain.
- Hard bond for aggressive cutting on rough applications.
- Great for ferrous metals (iron, steel, welds, etc.). Also good for stainless steel
$0.00
FLAP WHEEL W/1/4"MANDREL 1" DIAM, 1" W, 60 GRIT
FW1X1X60
- Straight 1/4" mandrel.
- 1" Diameter
- 1" Width
- 60 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$0.00
GRINDING WHEEL TYPE 27 4" D, 1/4" W, 5/8"
GW4X14X58
- Type 27 depressed center grinding wheel.
- Aluminum oxide grain.
- 4" diameter.
- 1/4” thick.
- 5/8" arbor hole.
- Soft bond for fast stock removal.
- For use on ferrous metals such as iron, steel, welds, etc and low grade stainless steel.
$0.00
FLAP WHEEL W/1/4"MANDREL 1-1/2" DIAM, 1" W, 80 GRIT
FW112X1X80
- Straight 1/4” mandrel.
- 1-1/2" Diameter
- 1" Width
- 80 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$0.00
GRINDING WHEEL TYPE 27 4-1/2" D, 1/4" W, 7/8"
GW412X14X78
- Type 27 depressed center grinding wheel.
- Aluminum oxide grain.
- 4-1/2" diameter.
- 1/4” thick.
- 7/8" arbor hole.
- Soft bond for fast stock removal.
- For use on ferrous metals such as iron, steel, welds, etc and low grade stainless steel.
$0.00
RAM PRO SERIES FLAP DISC - JUMBO 4-1/2" D, 7/8" ARB 60 GRIT
XFDJ412X78X60
- Ram Pro Series Flap Discs have the fastest grain removal in the marketplace for carbon-based steels.
- Contains an active grinding agent for cool cutting with light pressure. The optimized resin bond offers maximum cutting capacity, strong edge stability and long life.
- Premium Zirconia grain with a poly/cotton heat treated backing. The poly/cotton combination provides low stretch and strength for the high Zirconia concentration that Ram Pro Series contains. Rated up to 15,300 rpm.
- Recommended for aggressive use and heavy-duty applications:
- Weld grinding and blending
- Edge breaking
- Deburring
- Finishing and blending
- Contour finishing
- 4½” discs available with 5/8-11 arbor with hub or 7/8 arbor, in grits 40, 60, 80, and 120.
- Can be used on ferrous metals as well as stainless steel and high tensile alloys.
$0.00
FLAP WHEEL W/1/4" MANDREL 1" DIAM, 1" W, 80 GRIT
XFW1X1X80
- 1" diameter
- 1/4" shank
- 80 Grit X 1" width
- 30,000 Max RPM
- Aluminum Oxide
- Use on steel, stainless steel, iron, brass, aluminum, plastic, fiberglass, wood and glass.
- Excellent for working in small, difficult to reach places
$0.00
CRIMPED WIRE WHEEL 3" X .014
XUA02713
- 3" diameter
- Wire size .014"
- Trim length 15/16"
- Ma rpm 25,000
- For use on portable power tools
$0.00
ROLOC BRISTLE - DISC 3" 50 GRIT, 5/8" TAPERED
RBD3-50T
- Fast running bristle disc with Roloc attachment.
- 3" diameter.
- 50 grit.
- Color: green.
- 5/8” thick.
- Tapered center.
- Efficiently clean or strip many substances from metal surfaces without damaging the work piece.
- Quickly and easily achieve a quality, consistent finish with light pressure.
$0.00
CUT OFF WHEEL HIGH SPD TYPE 1 3" DIAM, 1/16" W, 3/8"
COW3X16X38
- 3" Diameter
- 1/16" Width
- 3/8" Bore
- 25,000 Max RPM
- Type 1 fast cutting cut off wheel. Square, burr-free cutting.
- For use with die grinder.
- Aluminum oxide grain.
- Hard bond for aggressive cutting on rough applications.
- Great for ferrous metals (iron, steel, welds, etc.). Also good for stainless steel
$0.00
ABRASIVE HAND PAD GENERAL PURPOSE
AHPGP
- Non-woven nylon/polyester fiber.
- Very fine aluminum oxide mineral.
- Load resistant.
- 9" long x 6" wide.
- 1/4" thick.
- Color: maroon.
- Most universally used in a variety of applications.
- Excellent starting point to clean, finish, grain, denib and defuzz.
- May be used by hand, with a hand pad block, or on an in-line sander.
$0.00
SURFACE COND DISC 4" MED, 3M 07451,07551
SCD4M
- Non-woven abrasive product.
- Aluminum oxide grain.
- 4" diameter.
- Medium grade.
- Color: maroon.
- Has a backing that mounts to Velcro hook backing pads.
- Used for cleaning, finishing, blending and deburring.
$0.00
DISC PAD-SURFACE COND DISC 2" 3M 07494
SCDP2
- Disc pad holder for hook & loop surface condition discs.
- 2" diameter
- 1/4” shank.
- Has 1/16” foam and Velcro hooks to stick on discs.
- .12" thick
- Max RPM: 23000
- Color: black
$0.00
DISC PAD-SURFACE COND DISC 4" 3M 07492
SCDP4
- Disc pad holder for hook & loop surface condition discs.
- 4" diameter
- 1/4” shank.
- Has 1/16” foam and Velcro hooks to stick on discs.
- .12" thick
- Max RPM: 13000
- Color: black
$0.00
ABRASIVE HAND PAD ULTRA FINE, LIGHT GRAY
X3M07448
- Non-woven nylon/polyester fiber.
- Very fine aluminum oxide mineral.
- Load resistant.
- 9" long x 6" wide.
- 1/4" thick.
$0.00
3M CUBITRON ROLOC DISC 3" 36 GRIT SOLD BY CARTON OF 15
X3M33190
- 3" diameter
- 36 Grit Purple
- Roloc Quick Change Pad
- 30,000 Max RPM
- Ceramic Precision-Shaped Grain
$0.00
MINI FLAP DISC ROLOC 2" 120 GRIT
XMRFD2X120
- Aggressive grinding for tight areas.
- 2" diameter.
- 120 grit.
- Combines grinding and finishing.
- Cotton layers cushion cutting action.
- Great for removing cutting torch slag from steel and grinding welds.
- Layers cut through to continually expose fresh grain.
- Quick change mini flap disc.
- Roloc style connector for easy use.
$0.00
MINI FLAP DISC ROLOC 2" 40 GRIT
XMRFD2X40
- Aggressive grinding for tight areas.
- 2" diameter.
- 40 grit.
- Combines grinding and finishing.
- Cotton layers cushion cutting action.
- Great for removing cutting torch slag from steel and grinding welds.
- Layers cut through to continually expose fresh grain.
- Quick change mini flap disc.
- Roloc style connector for easy use.
$0.00
MINI FLAP DISC ROLOC 2" 60 GRIT
XMRFD2X60
- Aggressive grinding for tight areas.
- 2" diameter.
- 60 grit.
- Combines grinding and finishing.
- Cotton layers cushion cutting action.
- Great for removing cutting torch slag from steel and grinding welds.
- Layers cut through to continually expose fresh grain.
- Quick change mini flap disc.
- Roloc style connector for easy use.
$0.00
MINI FLAP DISC ROLOC 2" 80 GRIT
XMRFD2X80
- Aggressive grinding for tight areas.
- 2" diameter.
- 80 grit.
- Combines grinding and finishing.
- Cotton layers cushion cutting action.
- Great for removing cutting torch slag from steel and grinding welds.
- Layers cut through to continually expose fresh grain.
- Quick change mini flap disc.
- Roloc style connector for easy use.
$0.00
MINI FLAP DISC ROLOC 3" 36 GRIT
XMRFD3X36
- Aggressive grinding for tight areas.
- 3" diameter.
- 36 grit.
- Combines grinding and finishing.
- Cotton layers cushion cutting action.
- Great for removing cutting torch slag from steel and grinding welds.
- Layers cut through to continually expose fresh grain.
- Quick change mini flap disc.
- Roloc style connector for easy use.
$0.00