Threaded Inserts
THREADED INSERT NUT UNC STEEL #6-32 THICKNESS 3/32
TINS632
- Steel threaded inserts.
- Use in any thickness of metal or rigid material of at least 3/32".
- Eliminates the need for tapping, welding and brazing.
- During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.
$0.00
THREADED INSERT NUT UNC STEEL 5/16"-18 THICKNESS 3/32
TINS5618
- Steel threaded inserts.
- Use in any thickness of metal or rigid material of at least 3/32".
- Eliminates the need for tapping, welding and brazing.
- During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.
$0.00
KNIFE THREAD INSERT UNC 1/4"-20 BRASS 1/2" LONG
XKTI1420
- Screws into pilot holes in wooden mounting surfaces and provide a female-threaded mounting point
- Commonly used with delicate or expensive woods that would deteriorate over time from the tightening and loosening of conventional wood screws.
- feature specialized threads that bite into the wood and provide their holding power.
- OAL 1/2"
$0.00
THREADED INSERT NUT UNC ALUM #10-24 THICKNESS 3/32
TINA1024
- Aluminum threaded inserts.
- Use in any thickness of metal or rigid material of at least 3/32".
- Eliminates the need for tapping, welding and brazing.
- During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.
$0.00
THREADED INSERT NUT UNC ALUM 1/4"-20 THICKNESS 3/32
TINA1420
- Aluminum threaded inserts.
- Use in any thickness of metal or rigid material of at least 3/32".
- Eliminates the need for tapping, welding and brazing.
- During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.
$0.00
THREADED INSERT NUT UNC ALUM 3/8"-16 THICKNESS 3/32
TINA3816
- Aluminum threaded inserts.
- Use in any thickness of metal or rigid material of at least 3/32".
- Eliminates the need for tapping, welding and brazing.
- During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.
$0.00
THREADED INSERT NUT UNC ALUM 5/16"-18 THICKNESS 3/32
TINA5618
- Aluminum threaded inserts.
- Use in any thickness of metal or rigid material of at least 3/32".
- Eliminates the need for tapping, welding and brazing.
- During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.
$0.00
THREADED INSERT NUT UNC ALUM #8-32 THICKNESS 3/32
TINA832
- Aluminum threaded inserts.
- Use in any thickness of metal or rigid material of at least 3/32".
- Eliminates the need for tapping, welding and brazing.
- During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.
$0.00
FLATHEAD THREADED NUT UNC ALUM #10-24 THICKNESS .010-.080
FTNA1024
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .250 min .254 max
$0.00
FLATHEAD THREADED NUT UNC ALUM 1/4"-20 GRIP RANGE .020 - .080
FTNA1420
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .332 min .338 max
$0.00
FLATHEAD THREADED NUT UNC ALUM 5/16"-18 GRIP .030 - .0125
FTNA5618
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .413 min .423 max
$0.00
FLATHEAD THREADED NUT UNC ALUM #8-32 GRIP RANGE .010 - .075
FTNA832
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .221 min .226 max
$0.00
FLATHEAD THREADED NUT UNC STEEL #10-32 GRIP RANGE .010-.080 25/BX
FTNS1032
- Steel Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .250 min .254 max
$0.00
HELICALLY COILED INSERT KIT UNC 1/2"-13
HCI12CK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:1/2"-13
- Drill size: 17/32
$0.00
HELICALLY COILED INSERT KIT UNC 1/4"-20
HCI14CK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:1/4"-20
- Drill size: 17/64
$0.00
HELICALLY COILED INSERT KIT UNC 3/8"-16
HCI38CK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:3/8"-16
- Drill size: 25/64
$0.00
HELICALLY COILED INSERT KIT UNC 5/16"-18
HCI56CK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:5/16"-18
- Drill size: 21/64
$0.00
HELICALLY COILED INSERT KIT UNF 5/16"-24
HCI56FK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:5/16"-24
- Drill size: 21/64
$0.00
HELICALLY COILED INSERT KIT UNF 7/16"-20
HCI76FK
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:7/16"-20
- Drill size: 29/64
$0.00
HELICALLY COILED INSERT KIT M10 X 1.25
HCIM10X1.25K
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M10 X 1.25
- Drill size: 13/32
$0.00
HELICALLY COILED INSERT KIT M5 X 0.80
HCIM5X.8K
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M5 X 0.8
- Drill size: 13/64
$0.00
HELICALLY COILED INSERT KIT M8 X 1.25
HCIM8X1.25K
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M8 X 1.25
- Drill size: 21/64
$0.00
HELICALLY COILED INSERT KIT M10 X 1.50
HCIM10X1.5K
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M10 X 1.50
- Drill size: 13/32
$0.00
HELICALLY COILED INSERT KIT M6 X 1.00
HCIM6X1K
- Made of stainless steel wire that has been rolled to a carefully controlled thread form.
- When installed, inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.
- Designed to repair stripped threads in a variety of metals, aluminum, aluminum alloys, steel and cast iron.
- Thread size:M6 X 1.00
- Drill size: 1/4
$0.00
FLATHEAD THREADED NUT UNF ALUM #10-32 THICKNESS .010-.080
FTNA1032
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .250 min .254 max
$0.00