Steel Fittings
STEEL TUBE NUT INVERTED FLARE 3/16"
X105X3
- Manufactured from zinc plated steel.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- For use with 3/16" o.d. tubing.
- Thread size is 3/8-24.
$0.00
STEEL TUBE NUT INVERTED FLARE 1/4"
X105X4
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- For use with 1/4" o.d. tubing.
- Thread size is 7/16-24.
$0.00
STEEL FITTING JIC MALE M18,20 TUBE 1-11 BSPP
X12-16F40MX-S
- 37° Flare, Tube to BSPP-ORR with Metric Hex
- 4,000 psi
- 18-8 Stainless Steel
$0.00
STEEL FITTING JIC MALE M18,20 TUBE 3/4-14 BSPP
X12F40MX-S
- Male connector BSPP TO 37° FLARE
- 3/4" Flare
- 3/4-14 BSPP
$0.00
STEEL FITTING O-RING FACE SEAL CAP 3/4" SAE
X4129X12
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 3/4" o.d. tubing.
- Thread size is 1-3/16"-12.
$0.00
STEEL FITTING O-RING FACE SEAL CAP 1" SAE
X4129X16
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 1" o.d. tubing.
- Thread size is 1-7/16"-12.
$0.00
STEEL FITTING O-RING FACE SEAL CAP 3/8" SAE
X4129X6
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 3/8" o.d. tubing.
- Thread size is 11/16"-16.
$0.00
STEEL FITTING O-RING FACE SEAL CAP 1/2" SAE
X4129X8
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 1/2" o.d. tubing.
- Thread size is 13/16"-16.
$0.00
STEEL FITTING O-RING FACE SEAL PLUG 5/8" SAE
X4229X10
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 5/8" o.d. tubing.
- Thread size is 1"-14.
$0.00
STEEL FITTING O-RING FACE SEAL PLUG 3/4" SAE
X4229X12
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 3/4" o.d. tubing.
- Thread size is 1-3/16"-12.
$0.00
STEEL FITTING O-RING FACE SEAL PLUG 1" SAE
X4229X16
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 1" o.d. tubing.
- Thread size is 1-7/16"-12.
$0.00
STEEL FITTING O-RING FACE SEAL PLUG 1/4" SAE
X4229X4
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 1/4" o.d. tubing.
- Thread size is 9/16"-18.
$0.00
STEEL FITTING O-RING FACE SEAL PLUG 3/8" SAE
X4229X6
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 3/8" o.d. tubing.
- Thread size is 11/16"-16.
$0.00
STEEL FITTING O-RING FACE SEAL PLUG 1/2" SAE
X4229X8
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 1/2" o.d. tubing.
- Thread size is 13/16"-16.
$0.00
STEEL FITTING JIC MALE M10 TUBE 1/4-19 BSPP
X6F40MX-S
- Male connector BSPP TO 37° FLARE
- 3/8" Flare
- 1/4-19 BSPP
$0.00
STEEL FITTING JIC TO O RING MA 3/8 TUBE 9/16-18
X6F50X-S
- Straight thread connector
- 37° Flare to SAE-ORB
- 3/8 Flare
- 9/16-18 SAE-ORB
$0.00