Screws
SHEET METAL SCREW PHIL PAN HD #12 X 2" STAINLESS
12X2PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 12
- Screw length 2 inches
$50.56
$0.5056
$0.5056
SHEET METAL SCREW PHIL PAN HD #12 X 2"
12X2P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 12
- Length: 2"
$40.59
$0.4059
$0.4059
TEK SCREW HEX WASHER HD #12 X 2"
12X2T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 12
- Length: 2"
$33.48
$0.3348
$0.3348
SHEET METAL SCREW HEX WASH HD #12 X 3/4"
12X34H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 12
- Screw length 3/4 inch
$25.65
$0.2565
$0.2565
SHEET METAL SCREW OVAL PHIL HD #12 X 3/4" STAINLESS
12X34OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 12
- Screw length 3/4 inch
$42.88
$0.4288
$0.4288
SHEET METAL SCREW PHIL PAN HD #12 X 3/4"
12X34P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 12
- Length: 3/4"
$30.12
$0.3012
$0.3012
TEK SCREW HEX WASHER HD #12 X 3/4"
12X34T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 12
- Length: 3/4"
$27.00
$0.27
$0.27
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 1"
1420X1
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 1".
$35.28
$0.3528
$0.3528
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 1-1/2"
1420X112
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 1-1/2".
$32.64
$0.3264
$0.3264
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 1-1/2" STAINLESS
1420X112OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 1-1/2".
$105.70
$1.057
$1.057
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 1-1/4"
1420X114
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 1-1/4".
$41.60
$0.416
$0.416
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 1-1/4" STAINLESS
1420X114OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 1-1/4".
$40.00
$0.40
$0.40
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 1/2"
1420X12
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 1/2".
$22.35
$0.2235
$0.2235
MACHINE SCREW HEX HEAD TYP-F 1/4"-20 X 1" THREAD CUTTING
1420X1HTYF
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 1/4-20 diameter.
- Length of 1".
$47.60
$0.476
$0.476
MACHINE SCREW HEX HEAD TYP-F 1/4"-20 X 1/2" THREAD CUTTING
1420X12HTYF
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 1/4-20 diameter.
- Length of 1/2".
$35.53
$0.3553
$0.3553
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 1" STAINLESS
1420X1OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 1".
$67.68
$0.6768
$0.6768
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 2"
1420X2
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 2".
$40.16
$0.4016
$0.4016
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 2-1/2"
1420X212
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 2-1/2".
$46.00
$0.46
$0.46
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 2-1/2" STAINLESS
1420X212OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 2-1/2".
$75.47
$0.7547
$0.7547
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 2" STAINLESS
1420X2OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 2".
$59.12
$0.5912
$0.5912
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 3"
1420X3
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 3".
$43.76
$0.4376
$0.4376
MACHINE SCREW PHILLIPS PAN HD 1/4"-20 X 3/4"
1420X34
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 1/4-20 diameter.
- Length of 3/4".
$29.52
$0.2952
$0.2952
MACHINE SCREW PHIL OVAL HD 1/4"-20 X 3/4" STAINLESS
1420X34OP
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Oval head Phillips.
- 1/4-20 diameter.
- Length of 3/4".
$34.32
$0.3432
$0.3432
MACHINE SCREW HEX HEAD TYP-F 1/4"-20 X 3/4" THREAD CUTTING
1420X34HTYF
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 1/4-20 diameter.
- Length of 3/4".
$42.90
$0.429
$0.429
Refine
6 More
2 More