Screws
METAL SCREW PHILLIPS FLAT HEAD #8 X 1-1/2"
X8X112FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1-1/2 inches
$17.10
$0.171
$0.171
METAL SCREW SQ DRIVE FLAT HEAD #8 X 1-1/2"
X8X112FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1-1/2 inches
$28.08
$0.2808
$0.2808
TEK SCREW PHILLIPS PAN HEAD #8 X 1-1/2"
X8X112PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1-1/2"
$17.85
$0.1785
$0.1785
TEK SCREW PHILLIPS PAN HEAD #8 X 1-1/2" BLACK
X8X112PT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Phillips pan head.
- Steel zinc black.
- Diameter: 8
- Length: 1-1/2"
$37.95
$0.3795
$0.3795
SHEET METAL SCREW SQ DR PAN HD #8 X 1-1/2"
X8X112RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 8
- Screw length is 1-1/2 inches
$24.75
$0.2475
$0.2475
TEK SCREW SQUARE DRIVE PAN HD #8 X 1-1/2"
X8X112RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1-1/2"
$27.00
$0.27
$0.27
SHEET METAL SCREW RND WASHER PAN HD #8 X 1-1/2", QUAD DRIVE, BRONZE
X8X112RWHQBZ
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head quad drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Stat bronze plated steel
$50.88
$0.5088
$0.5088
METAL SCREW PHILLIPS FLAT HEAD #8 X 1-1/4"
X8X114FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1-1/4 inches
$19.20
$0.192
$0.192
SHEET METAL SCREW PHIL FLAT HD #8 X 1-1/4" STAINLESS
X8X114FHPS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Flat head, phillips drive
$40.00
$0.40
$0.40
TEK SCREW FLAT HEAD PHILLIPS #8 X 1-1/4"
X8X114FHPT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Flat head phillips head.
- Steel zinc plated.
$79.60
$0.796
$0.796
METAL SCREW SQ DRIVE FLAT HEAD #8 X 1-1/4"
X8X114FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1-1/4 inches
$42.35
$0.4235
$0.4235
TEK SCREW PHILLIPS PAN HEAD #8 X 1-1/4"
X8X114PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1-1/4"
$19.35
$0.1935
$0.1935
SHEET METAL SCREW SQ DR PAN HD #8 X 1-1/4"
X8X114RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 8
- Screw length is 1-1/4 inches
$27.30
$0.273
$0.273
TEK SCREW SQUARE DRIVE PAN HD #8 X 1-1/4"
X8X114RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1-1/4"
$45.04
$0.4504
$0.4504
Refine
6 More
2 More