Screws
SHEET METAL SCREW PHIL FLAT HD #10 X 1/2" STAINLESS
X10X12FHPS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- 10 X 1/2"
$21.90
$0.219
$0.219
SHEET METAL SCREW SQ DR PAN HD #10 X 1/2"
X10X12RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 10
- Screw length is 1/2 inch
$17.85
$0.1785
$0.1785
TEK SCREW SQUARE DRIVE PAN HD #10 X 1/2"
X10X12RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1/2"
$29.16
$0.2916
$0.2916
METAL SCREW PHILLIPS FLAT HEAD #10 X 1"
X10X1FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1 inch
$15.75
$0.1575
$0.1575
SHEET METAL SCREW PHIL FLAT HD #10 X 1" STAINLESS
X10X1FHPS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Flat head, phillips drive
$39.82
$0.3982
$0.3982
TEK SCREW FLAT HEAD PHILLIPS #10 X 1"
X10X1FHPT
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Flat head phillips head
- Steel zinc plated
$77.28
$0.7728
$0.7728
METAL SCREW SQ DRIVE FLAT HEAD #10 X 1"
X10X1FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1 inch
$30.00
$0.30
$0.30
TEK SCREW PHILLIPS PAN HEAD #10 X 1", STAINLESS
X10X1PTS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Stainless Steel
$45.84
$0.4584
$0.4584
SHEET METAL SCREW SQ DR PAN HD #10 X 1"
X10X1RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 1"
$20.85
$0.2085
$0.2085
TEK SCREW SQUARE DRIVE PAN HD #10 X 1"
X10X1RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1"
$24.00
$0.24
$0.24
TEK SCREW SQUARE DRIVE PAN HD #10 X 1" BLACK
X10X1RHT2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Round washer head, phillips drive
- Zinc plated steel with black painted heads
$29.28
$0.2928
$0.2928
TEK SCREW HEX WASHER HD #10 X 1", STAINLESS
X10X1TS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Grade 410 Stainless
$53.20
$0.532
$0.532
TEK SCREW PHILLIPS PAN HEAD #10 X 2-1/2"
X10X212PT
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel zinc plated
$107.52
$1.0752
$1.0752
METAL SCREW PHILLIPS FLAT HEAD #10 X 2"
X10X2FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 2 inches
$27.00
$0.27
$0.27
Refine
6 More
2 More