Relays / Sockets
RELAY 12 V, SPDT MICRO 280 TERMINALS W/RESISTOR, NO BRACKET 35 AMPS
X301-1C-C-R1
- Voltage rating 12 volts DC
- SPDT
- Resistor, 35A
RELAY 12 V, SPST W/RESISTOR NO BRACKET 20 AMPS
X3031AHCR1U0112VDC
- General purpose applications for automotive in power
- Automotive Relays 20A SPNO
- 960 watts
RELAY SOCKET SINGLE POLE FOR MINI ISO RELAYS BRACKET MOUNT
X3334485008
- Changeover relay, 12V, relay switch
- Mini relay allows rated switching currents of up to 75 A and has a nominal voltage of either 12 or 24 volts.
- Base plate and housing made from fiber-reinforced polyamide: High corrosion resistance.Housing: IP5K4, Terminal: IP20
- 12V relay: rated switching currents of up to 75 A - For high power
RELAY SOCKET 5 PIN WITH TERMINALS
X5PINRS
- Relay socket.
- Comes with 5 female terminals.
- Mates to standard mini relays.
RELAY SOCKET PRE-WIRED 5 PIN, 14 GAUGE GXL
X5PINRSW
- Prewired relay socket.
- 14 gauge black GXL wire.
- Mates to standard mini relays.
RELAY SOCKET PRE-WIRED 5 PIN, 14 GA CONT, 18 GA COIL
X5PINRSWC
- Prewired relay socket.
- 14 gauge wire, except 18 gauge on coil.
- Mates to standard mini relays.
RELAY 12 V, 40 A 5PINR SPDT, NO BRACKET
X0332204151
- Standard mini relay.
- Originally designed for use in automotive applications.
- Used to switch electrical devices featuring high power levels, or which are sensitive to voltage loss.
- Relays relieve the load on control switches and make for small voltage drops.
- Single pole, double throw.
- Does not have a bracket.
- Rated for 12-15 volt applications.
- Maximum resistive load is 40 amps.
RELAY 12 V, SPDT MICRO 280 TERMINALS W/RESISTOR, 30 AMPS NO BRACKET
X12077866
- Compact and capable operating at up to 30A and 12VDC
- Ideal for Headlight Control, Fuel Pump Control, Horn Control, A/C Compressor Clutch, Etc.
- Plastic sealed and designed with parallel transient suppression resistor and a Form C contact
RELAY CONNECTOR, SOCKET, MINI ISO CONTACTS 12" WIRE LEADS RIBBED SEAL
XH87173
- For connecting to a shrouded relay
- 5 contacts
- Prewired with 2-18 gauge and 3-12 gauge wires
RELAY 12 V, SPDT W/RESISTOR W/BRACKET 20/40 AMPS WEATHERPROOF
XH87411
- 12 volts
- 5 contacts
- SPDT
- Reistor
- To be used with shrouded connector
RELAY 12 V, SPST W/RESISTOR NO BRACKET 50 AMPS
XH87432
- Rated for 12 volt applications
- 70 amp rating
- 4 contact, two 1/4" wide, two 3/8" wide
RELAY 12 V, 20/30A, 5 PIN SPDT, W/ BRACKET
5PINR
- Standard mini relay.
- Originally designed for use in automotive applications.
- Used to switch electrical devices featuring high power levels, or which are sensitive to voltage loss.
- Relays relieve the load on control switches and make for small voltage drops.
- Single pole, double throw.
- Comes with bracket for easy installation.
- Rated for 12-15 volt applications.
- Maximum resistive load is 40 amps.
Refine